Hello Guys,
I had installed HTC home plugin on my Xperia and now its hung or unresponsive. I can see the start, call and Menu on the screen but touching that does not do anything .
Please help me out.
Has anyone seen this before ?
Regards,
which HTC Home are you using ?
i have PJC HTC Home installed and it's working perfectly. once i used the hack for the weather it was fine ...
Thanks for your reply mrdo,
I am using http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v2-1.html
I need to just uninstall this software but the phone is not responding..
please suggest a way to reset.. the other trouble is its not recognized as a device now using USB so I could not use mtty n other things..
is there any other way ??
thanks
thats not for VGA devices, it's for QVGA which is why it's not working.
Can you acess the X1 from through activesync on your PC?
If so then you can uninstall it from there (add/remove programs)
if not then I'm afraid you'll have to hard reset, and learn a valuable lesson, make sure you know what it is you're installing..
Hard reset, is take the back cover off and stick the sytlus in the small hole in the side next to the battery, while holding down the two silver buttons on the front.
Hello fards,
Thanks very much for the help..
Unfortunately I learnt the lesson the hard way
I tried hard reset as you suggested but it did not make any difference
what else can be done.. ?? any suggestion is most welcome.. I can try doing mtty reset but some how I could not go to boot loader mode.. how to go into bootloader mode ?
Please help..
Regards
dhamaal said:
Hello fards,
Thanks very much for the help..
Unfortunately I learnt the lesson the hard way
I tried hard reset as you suggested but it did not make any difference
what else can be done.. ?? any suggestion is most welcome.. I can try doing mtty reset but some how I could not go to boot loader mode.. how to go into bootloader mode ?
Please help..
Regards
Click to expand...
Click to collapse
If you've done it right it must have made a difference as this wipes the devices memory. If you can't do this then don't even start messing about with mtty
if you see the SE logo, then you haven't done it right.
hold the two silver hardware keys on the front of the x1 down after you've reset. Keep pressing them down till you see some text that tells you to press R
If you don't see this screen keep trying (reset+press the keys) till you do.
Thanks fards,
you are a lifesaver !! that seems to have worked and now I can use my phone ..
Thanks a ton once again !!
Related
Hi all I don't know what happened but I can't interact with it anymore since I installed net framework 2.0 on my mini sd card... the only thing that does is switch on and off... not even active sync... I try to reflash my current firmware "AKU3.2-1.0RC1" but it wont find the phone... guys please help me on this I need this phone for work...
well have you tried to dump the net frame off your card? Did you hard reset before you tried to re-flash?
I tried to start it without the mini sd but It wond sync and so I can not reflash it.... i tried to hard reset and the stylus wont do anything in the screen... only when I press the power button I can use the stylus to click yes or not... that's it... :S please tell me there is a combination of keys to reset it or I'm f***ed
I found out that I can get into boot screen if I press power+camera button and then reset... but from there how can I start the reflash?
ok have you done the comm + voice + reset When it is in reset press power, it will ask you if you would like to format, follow on screen. and then it should put it make to factory settings.
Man......... you are my heroooo... SOLVEEEEEED... THANKSSSSS... more then 7 hours trying to find a combination like that... and now is done thank you once again
so it worked for you?
Sorted!!!!
Yes...You are a star!!!! thank you...
reboot and froozen
I have a T-MOBILE MDA and i change a video accelaration setting and after reboot alway froozen and i cannot do anything;i try the combination comm+voice +reset and appear a command said ress send if you want do default or any othes key if u want quit;I press send and reboot again but nothing change;could you help me more?maybe i did not understand your procedure u suggest here;I am a poor italian live in China and i need my phone and dictionary;
nnnike said:
I have a T-MOBILE MDA and i change a video accelaration setting and after reboot alway froozen and i cannot do anything;i try the combination comm+voice +reset and appear a command said ress send if you want do default or any othes key if u want quit;I press send and reboot again but nothing change;could you help me more?maybe i did not understand your procedure u suggest here;I am a poor italian live in China and i need my phone and dictionary;
Click to expand...
Click to collapse
NEVER EVER enable that damn video acceleration feature in Pocket Controller without making a backup ( http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1270&more=1&c=1&tb=1&pb=1 ) OR without installing a Safe Mode application ( http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1255&more=1&c=1&tb=1&pb=1 ) first!
I've published MANY articles (example: http://www.pocketpcmag.com/blogs/index.php?blog=3&p=474&more=1&c=1&tb=1&pb=1 ) on the dire consequences of enabling video acceleration on WM5 devices. It's certainly worth reading all my articles thoroughly for anyone because, then, you can easily avoid situations like this.
sorry for the caps.
btw hello everyone
well lets just get to my problem.
i installed the touch it program rom thingy or whatever to my phone
and now im trying to restore it back to its original settings...
the only reason im doing that is because i cant connect the phone to the usb anymore. it WONT connect.
so im trying to restore it.
please help!
thanks!
or can someone just tell me how to reconnect it to my computer please?
i've tried different ports on the computer
and restarted it
but nothing, so please help me restore to factory settings or be able to use windows mobile device center
thanks!
maybe activesync didn't install properly when you flashed it..
or.. you should try the activesync uninstall/reinstall trick..
or a corrupt system file and you just have to hard reset the phone..
hmm..... good question
hard reset is when you press the clear storage right? or when u take out the battery while its still running??
well even if those arent hard resets i've tried them and none work
=[
A hard reset is preformed as follows:
-Hold down the two softkeys on the front of the device (the ones above the Windows logo and the OK button)
-Press the reset button using the stylus, which you can find below the volume adjuster on the left hand side of the device
-Release the stylus, but keep the softkeys held down
-You will see a warning screen
-Press the green send key on the left - the one with the phone icon on it to confirm the reset.
After that it will take a little while longer to start up the phone.
Btw if you by "original settings" mean restoring your official ROM a hard reset won´t do. You will need to flash the official ROM to go back if I´m not mistaken.
thanks for the info!
hey again
well im trying to restore the original rom but everytime i do it wont go past 1%
then touchit starts up.
help me please! i dont want touchit on my phone anymore
goodtilltomorrow said:
hey again
well im trying to restore the original rom but everytime i do it wont go past 1%
then touchit starts up.
help me please! i dont want touchit on my phone anymore
Click to expand...
Click to collapse
Did you hardSPL? What SPL / IPL version is shown on the multicolor screen?
knrubar said:
Did you hardSPL? What SPL / IPL version is shown on the multicolor screen?
Click to expand...
Click to collapse
Are you just trying to go back to the stock ROM becasue of the AS problem? Did you try a reinstall? After you uninstall before reinstalling AS go into your program files on the PC and delete the activesync folder.
If you HARDSPL'ed you need a STOCK ROM without the nbh. file. Thats why its kicking back to TOUCH.
Good Luck
with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote
muslim2009 said:
with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote
Click to expand...
Click to collapse
Hi
Sorry to hear your problem, try to read this guide http://forum.xda-developers.com/showthread.php?t=406721 and the stickies in the Elf Upgrading
Hope you can save your device
i have read it but i dont find the sollution :=(
can you help me plz ????
muslim2009 said:
i have read it but i dont find the sollution :=(
can you help me plz ????
Click to expand...
Click to collapse
Hi
Does it go into bootloader (3 colors )?
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(
nothing again
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco
muslim2009 said:
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco
Click to expand...
Click to collapse
Hi muslim2009
I tried a few searches but all the results say you need the bootloader screen , are you sure you didn't miss a step in hard reset or bootloader mode :
To enter the bootloader:
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
I sincerely hope it helps
I was also born in Morrocco at Casablanca and lived there until age 16. Anyway I'll continue searching.
Tito
thanks for help,but it won't work :=(..
[email protected]
add me if i can show you my htc ..
thanks from morocco
I'm not sure if it's possible with the HTC Touch, but I know when I was playing around with an old iMate SP3i (smartphone) I was able to do a ROM upgrade from files on the memory card.. Took me a few attempts to get it right, but it worked. I think I also upgrade my SP5 to WM6 from WM5 that way, but I'm not too sure about that.
Either way, a basic idea of what I'm talking about can be found here, but that is obviously for a different phone.. Maybe some of the more common members here would have better luck finding a similar process on a Touch....?
maybe its will be workin but what marterial i will need for this opperation??
On some HTC devices (cheetah, for example) if you put the ROM file (.bin) in the root directory of the SD card, the phone will flash directly from the SD card.
I think you do require to put the phone into bootloader for that to work though ... not 100% sure, but probably worth looking up.
Ok... Been trying to search for more information for you, but with not really knowing all the correct terminology it's taken me a while longer than I thought. I've found two threads that have some of the information I was looking for:
Recover / Revive your dead / bricked HTC ELF or ELFIN
Recover HTC Touch from tricolors RUU boot-loader (Mtty)
The second link is actually found inside the 2nd post (I think) of the first thread I mentioned here, looks like they are linked in some way. Your best bet is to read through and see if it is something that may help. Let us know if this works for you...?
thanks you man,i was read the first link befor..i will see for the second
hope will work.thank you again
I have a HTC ELF 0100 i want to change the language to english but i cant make anything. I try to hard reset the phone but this also is impossible. there is Windows mobile 6.1 installed in it.
Things you might need to know:
I HOLD the green and red Button and click on reset - for hard reset but nothing happens
To update an english rom i need to CID unlock. but this also fails saying ERROR 260.
And when try to upload a COOK rom it says ERROR 260 and the HTC screen become black i.e standy mode. it does not goes to the BOOTLOADER mode!
Where is the PROBLEM please help urgent !!
im sorry to tell u, but probably u dont have and elf. its a clone.
search the forum for clone info.
But i can assure you it an original one. Not clone or china made. But one things is that the battery is not an original one.
But i can assure you that the mobile is original. Not a China made.
zakiyy said:
But i can assure you it an original one. Not clone or china made. But one things is that the battery is not an original one.
But i can assure you that the mobile is original. Not a China made.
Click to expand...
Click to collapse
Use dsixda's All-in-one tool (http://forum.xda-developers.com/showthread.php?t=418892 ) to find the specific type of your phone.
Than we might be able to help you.
Dala11 said:
Use dsixda's All-in-one tool (http://forum.xda-developers.com/showthread.php?t=418892 ) to find the specific type of your phone.
Than we might be able to help you.
Click to expand...
Click to collapse
Hi man thx for the REPLY but this also i tried !! it does not shows anything !! Only giving Data UNKONw or something like that!
I was able to install ENABLERAPI.cab to make the above PROGRAM work.
i want to know why the ElF is not able to HARD RESET.... I HOLD the TWO BUTTONS [red&green] and PRESS RESET but it never enter the HARD reset..
Very Strange and time comsuming for me i need a REAL solution !!
zakiyy said:
Hi man thx for the REPLY but this also i tried !! it does not shows anything !! Only giving Data UNKONw or something like that!
Click to expand...
Click to collapse
Big chance your phone is a fake.. I'm sorry man..
Perhaps if you posted some pictures of your device (also the backside without the cover, and one without the battery) some might be able to help you figure out what's going on.
Hi
All what you mentioned : No hard reset, No bootloader, No Data with mtty mean one thing this is a chinese clone of ELF and you will find no solution here
Hard reset htc touch elf
hi everybody,
Please help me with my htc touch elf,
I try to hard-reset my htc that have windows 6.5 because of I can't run completely windows and can't soft reset it.
Please help me
Thanx !!!!!!!!!
HEY maaan !
just press the power off button + the camera button and the tri-color screen will be appeared
Hi everyone got a bit of a problem and would appreciate a bit of help , My acer s200 is unresponsive now , no blinking lights, nothing. I was in the middle of updating to ROM - English 3.003b.00.EN when it got accidentally disconnected.
I have had a look on the forum but had not luck finding anything that will help me out.
Any help would be apprerciated please.
tmmv1 said:
Hi everyone got a bit of a problem and would appreciate a bit of help , My acer s200 is unresponsive now , no blinking lights, nothing. I was in the middle of updating to ROM - English 3.003b.00.EN when it got accidentally disconnected.
I have had a look on the forum but had not luck finding anything that will help me out.
Any help would be apprerciated please.
Click to expand...
Click to collapse
hard reset the device and take it to go back to the bootloader mode, then flash rom again
try to follow the guide to flash rom http://forum.xda-developers.com/showpost.php?p=6138942&postcount=4
Hakim Rahman said:
hard reset the device and take it to go back to the bootloader mode, then flash rom again
try to follow the guide to flash rom http://forum.xda-developers.com/showpost.php?p=6138942&postcount=4
Click to expand...
Click to collapse
Thanks Hakim Rahman for the reply and link. I have 2 more questions what is the best way to hard reset the phone please? I have seen quite a few different ways to do this which i have followed with no luck as of yet. Also what is the best flash rom to use?
I have tryed to hard reset using the methods below which i think is the correct methods but still my screen is dead
Method 1. "Reset by pressing button combination Hold the Volume up and Volume down buttons while pressing reset until the screen shows “Clean Boot”.
And this way
Method 2. Hold vol up and vol down and press power.
Anyone please point me in the rite direction for the hard reset that will actually work please?
tmmv1 said:
Anyone please point me in the rite direction for the hard reset that will actually work please?
Click to expand...
Click to collapse
seems correct, but to make sure you try to look at http://www.hardreset.eu/acer_s200_hard_reset_soft_reset_en.html
Thanks once again for your reply and help Hakim
My phone has nothing happening at all it is completely dead, the battery was charged before it went off so i know that is still charged. I can't believe all i done was caught the wire and it came out of my phone while i was updating it to the latest Rom that i downloaded from Acer So will the hard reset still work even though nothing is coming on at all on my phone? The phone at the moment does not even light up Surely it can't be broken all together can it?
please help me, my acer s200 is stuck in clean boot. i need to install a new rom but i dont know how and i dont have a new rom. please help me i need an english rom. my email is [email protected]