I flash this phone with a wrong image, and now only a white screen appear.
Is impossible to make any key combination to get to the "download screen" or "update via k3img.bin".
But if i connect the cel via activesync I can see it on the desktop via trueconnection or any other remote control software (the cel is "working").
Some days ago, i make a dump of this cell and I have it on my computer (via pdocread), so my idea is to use the pdocwrite to at least write the first part00 to reprogram the buttons, so i can use a k3img.bin (in chinese... better than nothing) again.
But the software says that the partition is write protected, and I try almost all ways to unlock the Extended_ROM on windows and still says that is write protected.
Can u, masters of the cell phones help me?
Im facing the very same problen, so if some more knowledged might help us.
As Beastworm already described - I am too unable to get Download mode because of wrong button mapping.
nobody?
Beastworm said:
nobody?
Click to expand...
Click to collapse
Perhaps this programm can help you
k3 first aid kit
http://www.mobileuncle.com/thread-8799-1-1.html
I havn't tried it myself
By the way, did you make a hard reset after flashing? (Volume down + red + power.
Amaly said:
Perhaps this programm can help you
k3 first aid kit
http://www.mobileuncle.com/thread-8799-1-1.html
I havn't tried it myself
By the way, did you make a hard reset after flashing? (Volume down + red + power.
Click to expand...
Click to collapse
the buttons don't work. I will try the software now.
edit 1: Can u upload the software to megaupload? i don't have permission to download in mobileuncle
edit 2: OK, i reply and then i can download...
i connect the phone and nothings happend
Could you upload that software to somewhere else Beastworm ?
I'd like to give it a go.
tell me a good site to upload. Some people have troubles with rapidshare, others with megaupload, and others with others sites.
Tell me a site and i will upload.
here is the file
Thank you very much - It seemed to work on my phone !
Im in great debt to you guys for helping me out.
- Kalle Jokinen
JokinenK said:
Thank you very much - It seemed to work on my phone !
Im in great debt to you guys for helping me out.
- Kalle Jokinen
Click to expand...
Click to collapse
what u do?
and, what .img u use to reflash the phone?
I installed the app, connected the phone & waited until it was recognized as windows mobile. Started the IDT before the first aid kit & used image: P638M30_TH_UI1_L12_C7_CHS_MFGW_WM650_C02SPC002R01_091203.bin (WM6.5 Chinese).
After the IDT was waiting for the phone to connect, I started up the first aid kit & simply clicked Download mode and the IDT took care of the rest.
It took me two flashes to get it right, but after that it's been working as expected.
Im not sure, but if you're running either windows vista or 7, you might wanna run the first aid kit as an administrator.
nothing, i am in windows 7 (and running it as administrator) and the download mode button is still in grey
I will search for a xp machine and try again.
btw. The 6.1 chinese rom, have a good button mapping.
Do you mind sharing that working 6.1 image? And I hope you can revive your phone with some xp machine!
let me find it.
I dumped a working 6.1 English, but only the *.raw-files. I don't know how to get them together to a working image.
It's from a 01.001.IP638 EN, RomDate 9/15/2009, Radio Version 1.07.9235, Protokol Vers. DV3.0
Amaly said:
I dumped a working 6.1 English, but only the *.raw-files. I don't know how to get them together to a working image.
It's from a 01.001.IP638 EN, RomDate 9/15/2009, Radio Version 1.07.9235, Protokol Vers. DV3.0
Click to expand...
Click to collapse
i have a dump of a english too. But I don't know how to convert it as a .bin too
NEWS: MY PHONE IS ALIVE AGAIN (in a windows XP machine)
but.... i flash another bad rom , and now all is flipped like a mirror (and the buttons are still bad mapped )
The K3 First aid kit don't work now (it recognizes it, but when i press "download mode" the phone don't restart). Is a very clean spanish rom of 6.1, so i think that p638chinesestuff.cab that is installed when a hard reset is done, is the responsible to k3firstaid work.
So i will try to extract it from the dump, and install it on the phone, and try to reflash again.
Why I flash a bad rom?... i have a file with the name "K3imgCHI61.bin" and I think thats was the chinese 6.1.... but not. It is the Chilean (my country) 6.1
Fine, that your phone is alive again.
I read somewhere (I don't now where) that somebody solved the problem with the mirrored screen after flashing a new rom. He made a hard reset and after aligning screen everything was o.k.
Amaly said:
Fine, that your phone is alive again.
I read somewhere (I don't now where) that somebody solved the problem with the mirrored screen after flashing a new rom. He made a hard reset and after aligning screen everything was o.k.
Click to expand...
Click to collapse
I can't find the hard reset combination of this rom via buttons
And the startup clean via settings don't work.
can someone send me that p638chinesecharacters.cab file what is installed in the phone during a hard reset?
i try to extract it, but i can't
Related
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
Hello Everyone
I need big time help. I just bought Hp 6945 and I tried to update GSM rom from 1.02 to 1.08, while updating it says update fail and try to restart Ipaq and start again. Now My problem is Ipaq just stuck to Hp invent logo. I tried to reset and hard reset and remove battery but notthing work.
I need help
Could some please help me to How to fix this problem?
Thank you
same BS happened to me. the only way to fix it is to load the UK 6915 ROM. thats the ONLY way to fix it. AVOID this update do not try to update the radio. I bricked my phone doing this. STILL looking for a solution. Radio stack is daamged.
where Can I find Uk 6915 rom
Thank you for reply. Where can I found the UK 6915 rom. Is there any instruction to How to load rom?
Thank you
If is FIXEDDDDDDDDDD
Ok
I got it fixed, very simple solution
found it here
http://pdaphonehome.com/forums/hp-h...dowloaded-rom-update-ipaq-dead-need-help.html
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider
No network connection
Ok everything work fine, but Now I cann't connect to tmobile. It keep showing me no service.
Any Help please
Ok It is fixed again
There is another update at HP website, which is software update. After installing that everything working fine.
can anyone help? i just bricked my ipaq 6965 too. had already followed those few instructions without any success.. what do you mean by "with or without SIM card"?
After a soft reset, mine's stuck at the initial blue/white boot screen.
Hard reset doesn't work (assuming its call + hang up + power + poke reset).
Ideas?
bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845/Ipaq_HW69XX_ENG_ROM.zip.html
download files from rapidshare posted by me ,r tested on my phone
hi i have tried to dl the rom asi having the same prob but the file cannot be downloaded. is there any other way to get from you
garyakw said:
hi i have tried to dl the rom asi having the same prob but the file cannot be downloaded. is there any other way to get from you
Click to expand...
Click to collapse
If you are stuck on a HP Invent Screen, with G.39, etc.
And you have tried to hard reset and softreset with no luck, this is what you do.
XP Instructions:
1. Download this link http://www.mediafire.com/?3ygfbx0sjdy
2. In the taskbar area in the right hand corner, right click on activesync, bare with me, I'm using Vista and have to remember this, click connections..., you need to uncheck everything click ok or apply...
3. press ctrl-alt-delete, end process wscescomm.exe, (named something like that, end the process.
4. Extract the file you downloaded if needed.
5. Connect your device to the usb port on your computer.
6. Run Uni Exit Bootloader Application. Done
Vista Instructions:
1. Download these 2 links, and extract them if necessary.
http://www.mediafire.com/?3ygfbx0sjdy
http://www.mediafire.com/?9pmjkponfsg
2. Start Device Manager, (Start-Control Panel, Class View[Far Left Corner])
3. Connect HW6900 to USB port, you should now see a Mobile Devices (Next to + sign), Double Click
4. Right-Click on the Device, Click Update Driver Software, Choose let me pick from a list, Uncheck compatible hardware box.
5. Click have disk, Browse to location where USBAS is extracted, choose the wceusbsh.inf file, Double Click.
6. You should see Microsoft USB Sync, if not and it reverts back to the already installed file, and the box rechecks itself, uncheck it, choose microsoft, and choose the latest Microsoft USB Sync to install
GOOD LUCK
in reference to
Default bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845...G_ROM.zip.html
its a no go here...
i get error 402.... times out and no can do.... what was that about german language... maybe i just need it spelled out. which screen does the unit need to be in. there is two... monochrome serial vs usb and there is the hp logo blue and white screen frozen indefinitely... please help i love this phone...
Hi, the rapidshare file is missing!
Could you give working link or send me the file to mail, please?
ipaq dude said:
Ok
I got it fixed, very simple solution
found it here
http://pdaphonehome.com/forums/hp-h...dowloaded-rom-update-ipaq-dead-need-help.html
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider
Click to expand...
Click to collapse
Man,r u sure the above can work well???? Confusing......I did the above like u indicated,but it's not work on my device HP6915,could u make it in details how u fixed the problem of updating ur device,thanks!
Regards,
Brose
Thanks, This help get me out of freeze
Thanks for posting this link. It brought my hw 6945 back out of the freeze. Stay away from HP's site update. Bad news
johnnynomadic said:
in reference to
Default bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845...G_ROM.zip.html
its a no go here...
Click to expand...
Click to collapse
Thanks for UNIEXITBOOTLOADER thing, it makes my 6965 rocks again! Btw, could this file be used on other pdaphone such as O2 Atom? Thx b4.
Maybe
Most Likely Yes
bmw2320 said:
Thanks for UNIEXITBOOTLOADER thing, it makes my 6965 rocks again! Btw, could this file be used on other pdaphone such as O2 Atom? Thx b4.
Click to expand...
Click to collapse
cdguider said:
Most Likely Yes
Click to expand...
Click to collapse
I don't think so,Curtis.....But as I know most of dopod device hardly be dead....
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Zulu137 said:
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Click to expand...
Click to collapse
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Asfarizal said:
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Click to expand...
Click to collapse
Manage to solve the problem ...thanks WIKI !!
Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus
Then Flash to any ROM you want !!
Thanks .... But
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Thank You
I will follow the instructions you gave and try to get it going this weekend.
Thank you so much for your time
Zulu137 said:
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
Click to expand...
Click to collapse
Looks like you've got a lot of reading to do, and a problem to sort out. Firstly a couple of answers...
Schaps is a Rom Cooking guru (makes custom versions of WM5, WM6 etc). When you get your phone sorted out I'd recommend trying one of his roms.
Hard SPL. The SPL is part of the bootloader which effectively dictates how a rom is flashed and what roms can be flashed. HardSPL is a custom version of this which allows you to flash any rom from any carrier. It also protects against a bad flash in many cases. It is recommended before you try flashing any new roms or radio roms. Use Hard-SPL-V7 at the bottom of the first post here.
The Rom upgrading software is contained in any of the cooked or carrier supplied roms. It is normally a .zip file which cotains 2 files: xxxxxRUU.exe and RUU_signed.nbh. You run the .exe file from your PC when connected to your phone via USB. More details of how to do this are in MrVanx's guides. Also other resources here.
Now to try to sort your phone out...
What is displayed on your screen when in bootloader mode? It should be something like this:
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro (This is HardSPL V7)
If you don't have an Olipro SPL then you need to get HardSPL onto your phone. If you haven't done any upgrading and have had the phone from new then I guess you don't have hardSPL.
Now you need to fix your USB Malfunctioning problem. I can't help too much here except to suggest trying a different cable, different USB port or different PC. Also, if you are running Vista try an XP maxhine. When you connect to the PC does your phone show Serial or USB on the screen? If you can't get a USB connection, all is not lost - you can re-flash your rom using an SD card, method here.
There is a thread about un-bricking phones which may help.
There are various diagnostic tools (which can also screw your phone if used incorrectly). The favourite of these is MTTY but you need a USB connection to use this.
If your phone is in warranty I'd recommend getting your supplier to sort it out, but if not I'd try to re-flash an ORIGINAL supplier rom (Cingular I guess). You can get links to the official supplier roms here.
I think (might be wrong) that sometimes when stuck in bootloader you need to flash an official rom, not a cooked one to recover your phone - then you can run HardSPL and then flash cooked roms again.
Cingular 8525 stuck in bootloader
Thanks for the reply ... lots of great input.
Now to answer some of your questions.
1) When I power up the phone (only pushing the power button ) it goes straight into the bootloader screen without pushing any other buttons, and it displays
HERM100
IPL-1.01
HERM100
SPL-1.06
Then at the bottom in the white bar it says "Serial"
The only way that i have found to power it down again is to remove the battery, there is no response from any single buttons after it is in bootloader
the soft reset and hard reset work but it just goes right back to the bootloader screen after.
2) The USB malfunction. This only started after the phone "crashed" and before that it worked great ... well i only used it to sync up to my work pc for the contacts and to get pictures onto my hard drive.
all the PC's that i use are running XP. I have tried my home PC and my Laptop
and the work PC and all of them have their own cables and they all say the same thing ... "the USB device is malfunctioning"
I am sure that when i get the phone going again the USB will start to function again.
3) Phone warranty ... I bought the phone off e-bay from a store in new york about 10 months ago as a "new unlocked cingular 8525" it was new and unlocked, but i have no idea how they unlocked it. I would assume that there would be no warranty now and in any case i live in Canada and would have to ship it down to the states to an AT&T repair center and that sounds like a nightmare to me with the customs and so on.
I will give you a little more background on the problem. the phone worked like a charm without any problems at all for the 10 months that i had it, then the morning of the crash the phones alarm did not go off in the morning and i was almost late for work ... i did not pay it any further attention untill at 3:26pm
that afternoon the alarm went off ??????? (it was set for 6:05am) so i checked the main clock time, it was right. I then checked the alarm time, it was right ??? So i figured that something must have just got confused, so i powered down the phone with the power button to just restart it and while it was powered down i removed the battery to take the oportunity to to clean all those fuzzies and dust that collect in the battery compartment out and put it all together and powered it up again (just by pushing the power button) and this wierd red, green, blue and white screen appeared and that is all that i have seen since ???
I hope that answers your questions and i will start going through the links that you sent and get to reading ... will there be a pop quiz ... lol
Thanks again for your time and i very much appreciate all the time that all of you have spent on me and my phone ..... I know that you all just feel bad for me because i now have to use a Motorolla V551 ... lol
Great Work
ultramag69 said:
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Click to expand...
Click to collapse
Thanks a lot man & great work i unbricked my Herm100 with method u mention above thanks a lot & great job keep it up
I also have this problem.
I d/l Hard-SPL-V7
and when i run RUUWrapper.exe
I get an error saying the application failed to initialize properly (0xc0000135)
What's going on?
How do i fix this?
this happened when i was trying to unlock the phone.
Thanks
need help
when i switch on my orange herm100 it shows On the bootloader screen is displayed:
HERM100
I PL-1.01
HERM100
SPL-1.40.01ipro
history : i buy unlocked orange phone
fewdays back i found no imei ,
yesterday i try to flash by micro sd but in gsm stage its gets hang no progress after extrom stage
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM - (NO ACTION)
OS -
i tryed several time no action, i cant connect by mini usb.
PLEASE help me
tell me which it the right rom to chose? step by step procedure..
how to rectify imei?
thanks and regards
kirtibas
kirtibas, sorry it took so long to reply, 1st thing I'd do is upgrade to SPL 2.10 olipro. This is safer to use than others. then I'd suggest reflashing a stock rom to see if that works. After stock rom works then use a cooked rom as your heart desires... Cheers...
I have received one elf with is stucking on calibration menu,everytime that i press all the 5 positions again it keeps on asking for it and i cant get to the phone.
Phone is detected by activ syn ,i want to upgrade the rom but as i'm having this problem i cant upload cert and enabl files.I cant do hardspl nothing.
Is there anyway i can repair this phone.It has got 2.26.00 spl.
Regards
I had the same problem.... but I just hard reset my phone with the styles and started my phone again and then pu it fast on my computer and started the upgrade to 2.28 and the my phone worked correctly.
Maybe I've made some mistakes but that's because im 13 and I live in Holland
I hope its good information for you!
hi sonkar read this thread http://forum.xda-developers.com/showthread.php?t=445666
i agree with marcbrug .. try to do a hard reset .. that is by holding the End & the Call Buttons and soft reseting the phone.. when the confirmation msg appears press the "Middle" (the largest) button..
hope that helped...
I have already done the hard reset,it's the first thing i did but still facing same problem.
sonkar said:
I have already done the hard reset,it's the first thing i did but still facing same problem.
Click to expand...
Click to collapse
It's happened to me a couple of times. I just re-flashed the ROM (hard reset did not work).
Can you explain how i can flash the rom?
Cos as the phone gets stuck in calibration i cant install cert and cab files in the phone.So i cant do hardspl and neither flash the rom.My spl is 2.26.00.
Regards
sonkar said:
Can you explain how i can flash the rom?
Cos as the phone gets stuck in calibration i cant install cert and cab files in the phone.So i cant do hardspl and neither flash the rom.My spl is 2.26.00.
Regards
Click to expand...
Click to collapse
You could probably still install it manually if you are able to connect to ActiveSync during the screen calibration.
First, try installing "myMobiler" which allows you to access the phone from your PC (like in Remote Desktop). See if you can get any further than the calibration screen with that.
Otherwise, download the "itsutils" package from here:
http://www.xs4all.nl/~itsme/projects/xda/tools.html
Then, use "prun" to remotely launch the CAB file from the DOS window:
e.g. C:\> prun.exe \Windows\myfile.cab
I have never tried this command with CAB files but it worked with Windows Mobile EXE files.
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone