Related
After flashing MAGLDR113 to install an NAND build my htc get freezed in the startingscreen. I can´t get into the bootloader and i also can´t do an hardreset.
What else can i do to get my hd2 working? I hope you can help me.
maybe usefull:
radio rom 2.15.50.14
Goatrip stock rom
greets schueffi
phone completely off
press power to turn on, but keep it pressed, dont let go.
phone will vibrate as it starts, then you see the first boot screen, (keeping power pressed still) then the screen jumps black with yellow at teh top, keep pressing power until teh menu items apear.
thanks but i´ve tryed that for many times but nothing happend...
is it possible to flash an rom without getting into the bootloader?
have anyone an other idea what i can do?
Not sure if this will help you, but I was being a noob and trying to use the touchscreen with magldr to select a menu item, but you're meant to use the volume up and down keys and the call button to select an item. To flash, select usb flasher. Hopefully that was of help
Hi, is there a solution for this? I have the same problem.
I wanted to install NAND Android on my HTC HD2 device actually running WM and Android on an SD card. I followed all the steps carefully:
I flashed HARDSPL with HSPL4
I updated the Radio version to 2.15.50.14
I installed MAGLDR113 and the installation gave me no problems, but when rebooting, the phone gets stuck in the initial screen and it doesn't either boot or let me go to the boot menu no matter for how long I press the power or the down volume button.
Anybody can help?
Thanks
Hi All,
I have been running a few NAND Android ROMS but seem to have an issue where pushing the power button on the HD2 no longer locks the phone, it just brings up the Power Off / Airplane mode options etc.
I think the button is damaged and sticking so wanted to go back to stock WinMo ROM to test this and if necisary send back for repair.
I have downloaded the stock O2 ROM from HTC.com but cant work out how to load this ROM. I presume I need to boot to HSPL?? only thing is I cant boot to it, I just get the MAGLDR screen.
Not sure if I'm doing something blatantly stupid or even if the button is not actually broken, although it does exactly the same in all Android builds I have tried. Is there a softkey that can be set to lock the screen?
Any adive much appreciated.
Thanks
Denno
Phone off
hold vol down
tap and release power
keep holding vol down till coloured screen apears
plug in usb, wait for serial to chnge to usb, run the flash.
If you have the 3.14 stock you also need to run hspl4 and choose 3.03.0000
Or
flash from sd card (look it up) will do both the flash and set 3.03.0000 all in one go.
how can i tell if this is installed on the phone. it is running on nand android
thanks
Power off the phone. Turn it one but Hold on to your power button until you see magldr menu. Might have to hold on.for like 20 sec
Sent from my HTC HD2 using XDA App
chef2 said:
how can i tell if this is installed on the phone. it is running on nand android
thanks
Click to expand...
Click to collapse
android is loaded by maglde or clk ...if u see a black screen with some caracteres and go go go at start than it's magldr ...if android boot directly than it's clk.
u can also try to hold power button at start than u will see the magldr menu if installed
I just bought an HD2 with windows phone 7 already installed. The guy i bought it from said that the phone came like that from the previous owner.
From what I can tell, windows phone 7 has been flashed to the nand/internal memory.
Can someone point me in the direction of where to look to remove this OS so that I can install the other wonderful Rom's developed for the HD2 (android, meego, etc)?
I've been looking around but i'm a little lost.
Thanks!
Personally i would seriously consider taking the HD2 back to its stock defaults and then work forward, the problem of using someone elses work is that you dont actually learn anything, which is what this commuinity is all about
So if you want my advice do an SD card flash of a stock ROM for your device
first things first, go to HTCs website
http://www.htc.com/europe/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
grab yourself a stock ROM (if you have a 1024MB version of the HD2 then be careful!)
extract the file you downloaded, use winrar or 7zip
- Take the "RUU_signed.nbh" and copy it to a blank SD card .
- Rename it to "leoimg.nbh"
- put that SD card in the HD2
- Reset the device while pressing the volume down button.
- Follow directions
that should perform an SD card flash, meaning it will remove absolutely everything and start from scratch, ie Windows Mobile
you can then decide what you want to install and go from there
as a rule the process is HSPL>RADIO>(MAGLDR)>ROM
http://forum.xda-developers.com/showthread.php?t=914924
has some general guides
but as a rule you should really just do to the thread of your chosen OS, that should have some stickys on how to do things and dont forget the wiki!
Thanks for your reply!
I seem to be stuck, when i hold "volume down + power" I get into this:
aMAGLDR V1.12
Boot Menu
1.Boot WPH
2.Boot AD SD
3.Boot AD NAND
4.USB Mass Stg
5.USB Flasher
6. USB TTY
7. AD Hardreset
8.Tetris
9.Servies
10. Reset
11. Powerdown
Can I flash the 6.5 Rom from here?
aludus said:
Thanks for your reply!
I seem to be stuck, when i hold "volume down + power" I get into this:
aMAGLDR V1.12
Boot Menu
1.Boot WPH
2.Boot AD SD
3.Boot AD NAND
4.USB Mass Stg
5.USB Flasher
6. USB TTY
7. AD Hardreset
8.Tetris
9.Servies
10. Reset
11. Powerdown
Can I flash the 6.5 Rom from here?
Click to expand...
Click to collapse
nope!
your holding down the power button arent you?
take out the battery
hold the vol DOWN key
put the battery in (keep holding down vol down)
then "tap" power button (push and let go) the phone will vibrate a bit
keep holding down the vol down key until the tri colour screen comes on, if you copied the .nbh file and renamed it too your SD card it "should" allow you to install it
i tried it to it stays on red green blue white serial.
i have installed win7 but want to loose it
aludus said:
Thanks for your reply!
I seem to be stuck, when i hold "volume down + power" I get into this:
aMAGLDR V1.12
Boot Menu
1.Boot WPH
2.Boot AD SD
3.Boot AD NAND
4.USB Mass Stg
5.USB Flasher
6. USB TTY
7. AD Hardreset
8.Tetris
9.Servies
10. Reset
11. Powerdown
Can I flash the 6.5 Rom from here?
Click to expand...
Click to collapse
afraid not !!
and are you sure you held down the volume down button before pressing the power key !!
cos if you did....i am sorry to say...but yes...i had this issue in the past where i was not at all able to go into the bootloader..the one with the 3 color screen !!
tried everything...finally succeeded !! in case you have this issue...i shall tell you how i was finally able to get into bootloader and flash a stock/custom ROM.
ruthlessboy said:
i tried it to it stays on red green blue white serial.
i have installed win7 but want to loose it
Click to expand...
Click to collapse
yea...so once when you are on the 3 color screen why dont you simply go ahead connect your USB and flash a custom ROM ???
or if you want stock...copy the .nbh file in your SD Card...and the flashing will start automatically...get it ???
Whats your reason for wasnting to remove WP7?
I personally think its better than most roms, and a about tied with the energy rom.
try flashing Yukis V5 and you might prefer WP7
no connection
backlashsid said:
afraid not !!
and are you sure you held down the volume down button before pressing the power key !!
cos if you did....i am sorry to say...but yes...i had this issue in the past where i was not at all able to go into the bootloader..the one with the 3 color screen !!
tried everything...finally succeeded !! in case you have this issue...i shall tell you how i was finally able to get into bootloader and flash a stock/custom ROM.
yea...so once when you are on the 3 color screen why dont you simply go ahead connect your USB and flash a custom ROM ???
or if you want stock...copy the .nbh file in your SD Card...and the flashing will start automatically...get it ???
Click to expand...
Click to collapse
i did all of that but when it comes to flashing it stays on zero and wont flash giving an error
My HD2 starts always in MAGLDR???? Absolutely! If I put battery in, it starts without any hardkey in MAGLDR. If if I push vol- it takes the same way. With any other key no different! The vol- is ok, because I can use it in MAGLDR. Anybody knows....? Is it a brick?
Thanks
Udo
udo 240 said:
My HD2 starts always in MAGLDR???? Absolutely! If I put battery in, it starts without any hardkey in MAGLDR. If if I push vol- it takes the same way. With any other key no different! The vol- is ok, because I can use it in MAGLDR. Anybody knows....? Is it a brick?
Thanks
Udo
Click to expand...
Click to collapse
if you don't want to always go straight to magldr menu
choose 10. services 1. bootsettings 2. always menu-no
but be sure to specify in bootsettings 1. boot sources which method you choose to autoboot
If I choose "10. services 1. bootsettings 2. always menu-no", the phone sitches very fast back to bootsettings menu, without pushing any key.... no chance....
udo 240 said:
If I choose "10. services 1. bootsettings 2. always menu-no", the phone sitches very fast back to bootsettings menu, without pushing any key.... no chance....
Click to expand...
Click to collapse
So what happens when you switch off then on your phone??
Does it try to boot android from sd? nand android or wph?
Have you installed any rom yet?
Everything you have said so far is what is supposed to happen.
Edit; wait, did you mean it goes back to bootsettings menu or boot menu?
Hi and thanks for your reply. I put the battery in the Leo and it starts without any button.... It always starts in the MAGLDR. If I push in the beginning vol- it also goes in the MAGLDR. I tried diffrent keys while starting, always the same. In MAGLDR in "10. services 1. bootsettings 2. always menu" I can´t select the option "no", because it turn back very fast in "1. bootsettings" menu. I only see the "always menu" like a flash.
First I thought a hardkey is broken, but they all are working well ....
Edit: I can´t switch off my phone after it starts in MAGLDR
udo 240 said:
Hi and thanks for your reply. I put the battery in the Leo and it starts without any button.... It always starts in the MAGLDR. If I push in the beginning vol- it also goes in the MAGLDR. I tried diffrent keys while starting, always the same. In MAGLDR in "10. services 1. bootsettings 2. always menu" I can´t select the option "no", because it turn back very fast in "1. bootsettings" menu. I only see the "always menu" like a flash.
First I thought a hardkey is broken, but they all are working well ....
Edit: I can´t switch off my phone after it starts in MAGLDR
Click to expand...
Click to collapse
Really interesting never heard this problem before,i think this must be related hardware,something wrong with your power button,try to push vol- button first than installed the battrey,see maybe it will bring you to tricolor screen.
No problem ... Had such problem ...
udo 240 said:
Hi and thanks for your reply. I put the battery in the Leo and it starts without any button.... It always starts in the MAGLDR. If I push in the beginning vol- it also goes in the MAGLDR. I tried diffrent keys while starting, always the same. In MAGLDR in "10. services 1. bootsettings 2. always menu" I can´t select the option "no", because it turn back very fast in "1. bootsettings" menu. I only see the "always menu" like a flash.
First I thought a hardkey is broken, but they all are working well ....
Edit: I can´t switch off my phone after it starts in MAGLDR
Click to expand...
Click to collapse
Dear friend ... I had such problem ... but don't worry a MAGLDR re flash will solve it but first make a backup of all you have to avoid data loss ... these ways may help :
1- I tried to boot into bootloader menu ( 3 color page ) but the problem was that it was booting too fast but if you do it quickly , you make it ... just put the battery and push the buttons : Vol- + power off and the bootloader will boot ... if couldn't , try the 2nd way
2- you need to power off your phone ... so boot into any ROM you have ( WPH / Android / FireFox / Linux Debian / Ubunto / etc. ) and do a power off from the ROM ... then try key combinations to boot into bootloader
would be glad to know if you could make it or not ... waiting for your response ... Good luck
With Best Wishes
Hitman1376