Related
Hey,
i searched Google, XDA and PocketPC.ch, but i didnt find an answer for my question.
I want to update MAGDLR from 1.12 to 1.13 and install CWM.
So i have to flash a stock rom to do this. But how can i do that?
I got a 1.66 stock Rom from MSKIPs 4Shared. acc. But the HD2 has to be connected to Mobile Device Center.
I dont know how to do that, because Android is still NAND.
My HD2 was/is?! branded by Vodafone GER its out of a contract for buisness customers.
hope u can help me
regards
There's no need to go back to stock. Just go to bootloader (ie vol down + power on), connect to pc and then run the romupdateutility in the magldr 1.13 download.
So simple....
Thank You
Isn't it volume up and power button?
Sent from my HTC HD2 using XDA App
tgtoys said:
Isn't it volume up and power button?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
No, you hold vol down and power it up. Hold vol down until tricolor boot screen comes up.
Hello everybody
I installed the beta version of the gingerbread, the first which came out on the XDA. Now my problem is that I can't use the USB or GPS and i want to get the new gingerbread version, but i can't do that because my usb doesn't work.
The magldr doesnt startup when i turn on my phone. When it starts
It's loading something and then i counts 1...2...3... GOGOGO, and then i booting up to the android.
But in always keep booting instead of giving me the menu.
it's malgdr v1.13 which is installed.
Can anybody help me??
I'm in big trouble...
Thank you all!
Poulsen7500 said:
Hello everybody
I installed the beta version of the gingerbread, the first which came out on the XDA. Now my problem is that I can't use the USB or GPS and i want to get the new gingerbread version, but i can't do that because my usb doesn't work.
The magldr doesnt startup when i turn on my phone. When it starts
It's loading something and then i counts 1...2...3... GOGOGO, and then i booting up to the android.
But in always keep booting instead of giving me the menu.
it's malgdr v1.13 which is installed.
Can anybody help me??
I'm in big trouble...
Thank you all!
Click to expand...
Click to collapse
Reported for being in the wrong section.
Sounds like you need to reflash a stock windows rom and start again. If you dont know how to do this i suggest you read the oficial magldr thread.
All you have to do is when you reboot hold the power button down it will bring you back into magldr. Also the next time you have a question use the Q & A section.
This information can also be found in the magldr thread ill post a link for you.
http://forum.xda-developers.com/showthread.php?t=893618
Sent from my Android Powered HD2 using XDA App
But when i hold down the volume button and i want to re-install the windows system it's just booting with the android again...
1...2...3... GOGOGO
Poulsen7500 said:
But when i hold down the volume button and i want to re-install the windows system it's just booting with the android again...
1...2...3... GOGOGO
Click to expand...
Click to collapse
Turn off your phone then hit the power button only hold it down until you see magldr. Don't hold down the volume button unless your trying to get into the boot loader.
a) Ask "questions" in the "Q&A" forum. (Common sense really).
b) Use proper titles that are descriptive of topic not something silly like "Help me!" (Also common sense).
c) Use search and read stickies before creating a topic that has obviously been discussed many times before. (Again, yes you got it common sense).
d) If you want the magldr menu, turn on phone and then press and hold power button when you see magldr and it will load up menu for you instead of booting into a kernel.
e) If you want to go into bootloader you hold down "Volume Down" after powering on untill you get the tri-color screen. You can then either flash via USB from windows or flash via SD card if you have a rom on your root of sd called "leoimg.nbh" (WM6.5 and Radio roms ONLY).
any info on when this will be available for the hd2
i broke the volume ribbon cable so i cant navigate through magdlr
watercooled223 said:
any info on when this will be available for the hd2
i broke the volume ribbon cable so i cant navigate through magdlr
Click to expand...
Click to collapse
Search before posting
Munjeni's Touch recovery.
thanks.
is the touch available in the magdlr to navigate to recovery as both my volume buttons dont work ?
watercooled223 said:
thanks.
is the touch available in the magdlr to navigate to recovery as both my volume buttons dont work ?
Click to expand...
Click to collapse
If your volume buttons are broke you definitely should switch to cLK with touch recovery and you'll never have to worry about it again since you use the home button long press while rebooting to go into recovery, and in cLK you can use quick boot app or rom manager or power menu to reboot into recovery. Is super easy to install with the hd2 toolkit.
Sent from my 1.8ghz Galaxy Note!
roloracer said:
If your volume buttons are broke you definitely should switch to cLK with touch recovery and you'll never have to worry about it again since you use the home button long press while rebooting to go into recovery, and in cLK you can use quick boot app or rom manager or power menu to reboot into recovery. Is super easy to install with the hd2 toolkit.
Sent from my 1.8ghz Galaxy Note!
Click to expand...
Click to collapse
thanks
can you point me to a guide for that as i have never used cLK
watercooled223 said:
thanks
can you point me to a guide for that as i have never used cLK
Click to expand...
Click to collapse
Haha please search.. or check my sign.
Sent from my HTC HD2 using xda premium
problem, , , clk is flashed from bootloader, bootloader is accessed by using volume....
what should i do as i cant use the volume buttons ?
i am currently on the ics tosti
watercooled223 said:
what should i do as i cant use the volume buttons ?
i am currently on the ics tosti
Click to expand...
Click to collapse
Hmm try plugging it into your computer and try flashing im not sure but on winmo the RUU would automatically put it into bootloader
elesbb said:
Hmm try plugging it into your computer and try flashing im not sure but on winmo the RUU would automatically put it into bootloader
Click to expand...
Click to collapse
Only works under winmo, requires winmo drivers to be active, which isn't the case when android is running.
@op, your solution is to fix the volume keys.
samsamuel said:
Only works under winmo, requires winmo drivers to be active, which isn't the case when android is running.
@op, your solution is to fix the volume keys.
Click to expand...
Click to collapse
can they be hard wired ?
Sorry, no clue, never had one apart. Perhaps you could dismantle it, make the connection long enough to flash? Be warned though, many people end up breaking more, the hd2 is not easy to take apart without damage.
Well the touch recovry works with magldr too, you don't meed clk for that, but you still won't be able to use recovery.
Have you tried the htc hd2 nand toolkit? i think i heard it has an "express mode" where it install everything without you doing anything, so maybe you won't need the buttons?!
Worth a try i'm guessing.
Good luck
JimWest7997 said:
Well the touch recovry works with magldr too, you don't meed clk for that, but you still won't be able to use recovery.
Have you tried the htc hd2 nand toolkit? i think i heard it has an "express mode" where it install everything without you doing anything, so maybe you won't need the buttons?!
Worth a try i'm guessing.
Good luck
Click to expand...
Click to collapse
if i can use the touch recovery in magldr then why cant i use recovery ?
im already running android
watercooled223 said:
if i can use the touch recovery in magldr then why cant i use recovery ?
im already running android
Click to expand...
Click to collapse
my bad, thats not what i meant, sorry. i meant the touch recovery works on magldr too, you don't need clk to get touch-recovery, but you won't be able to get past magldr itself in order to get to recover (sorry, english isn't my primary language, i hope you know what i mean). have you tried the nand toolkit?
am i able to go back to windows mobile ?
sorry, cant tell you anything about winmo, haven't used it since first android built came out (a year ago?), hope you'll find the help you're looking for
ok thanks.
does anyone know if i can get windows back on the hd2 with the volume buttons working ?
update...
i stripped the phone down and got a screwdriver on the torn volume button and have navigated to recovery..
now does clk support rom manager from the market place as with that can i select to boot up to recovery and bootloader ?
or is that not possible ?
watercooled223 said:
update...
i stripped the phone down and got a screwdriver on the torn volume button and have navigated to recovery..
now does clk support rom manager from the market place as with that can i select to boot up to recovery and bootloader ?
or is that not possible ?
Click to expand...
Click to collapse
Yes and no! You can use Rom manager to boot into recovery but not into bootloader since it doesn't have an android bootloader Rom manager won't find it. If you were able to rigg the buttons while the phone is apart, I suggest make sure you have plenty of battery and reboot while pressing the volume down and when you see the tricolor screen, keep it there, plug it into the pc and open the hd2 toolkit and install cLK and then I would suggest to put the touch recovery img file into the toolkit so you can flash it while setting it up, there should be instructions in the touch recovery thread on how to add the recovery.img to the toolkit.
Sent from my 1.8ghz Galaxy Note!
cant put the phone in three color state with vol down + power.
any other way to flash magldr 1.13????
What do you mean you can enter the 3 color state? Do you have any issues with your hardware buttons?
lqtdc said:
cant put the phone in three color state with vol down + power.
any other way to flash magldr 1.13????
Click to expand...
Click to collapse
You should really get your volume button checked. If its a hardware problem, then it can be fixed. Otherwise its bricked
If you have fastboot installed on your computer you can..
Extract the zimage from the zip file
then while phone is on and connected via usb (adb debugging on)
adb reboot-bootloader
then when in bootloader mode
fastboot flash zimage zimage
fastboot reboot
Hope this helps..
smokers said:
What do you mean you can enter the 3 color state? Do you have any issues with your hardware buttons?
Click to expand...
Click to collapse
no the button work ok. when i press in magldr 1.11 works ok.
shanman-2 said:
If you have fastboot installed on your computer you can..
Extract the zimage from the zip file
then while phone is on and connected via usb (adb debugging on)
adb reboot-bootloader
then when in bootloader mode
fastboot flash zimage zimage
fastboot reboot
Hope this helps..
Click to expand...
Click to collapse
sorry, to do this i have to be in android, dont???
Yep
Sent from my Nexus One using xda premium
there is a chance that the problem was the radio???
i dont check the radio. any way to flash tne 2.15 radio without the 3 color screen???
shanman-2 said:
Yep
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
sorry but i dont have a android to flash without recovery
lqtdc said:
there is a chance that the problem was the radio???
i dont check the radio. any way to flash tne 2.15 radio without the 3 color screen???
Click to expand...
Click to collapse
No.
Have you got the hd2 Nand toolkit?
What s the set up on the phone?
Spl etc
Sent from my Nexus One using xda premium
i have the 2.08 SPL or HSPL i dont remenber but i can put the magldr 1.11 with the romutility from windows but now i cant put in bootloader screen to put the magldr 1.13. i dont check the value of the radio.
Just in case ..are you holding volume down button and pressing and releasing power button while still holding volume button?
It really looks like there is a prob with the volume. As was said already it can be fixed
A cracked volume ribbon cable is not uncommon! !
Sent from my Nexus One using xda premium
the button is not the problem. when the magldr 1.11 loads the button works ok.
Magldr does not change the radio!
What exactly did you so?
Sent from my Nexus One using xda premium
i dont check the radio when install the magldr 1.11.
first i install the 2.08 HSPL, then with the ROMUpdateUtility install MAGLDR 1.11.
i never can put the phone in bootloader mode, that is my problem. i dont know what is the radio
i would suggest making a clear install using the task29 or WM1.66 instal ect.
you have to hold the vol down button while loading
I hav had a problem with magldr1.13 which was caused by the radio - it didnt want to install on the 2.15.50.14 radio and i have had to downgrade my radio, install magldr1.13 and the update the radio to the 2.50.15.14.
but still consider a fresh install of all things to eliminate some stuff staying in the nand memory after such things ...
my problem is i cant put the phone in bootloader mode (Vol Down + Power).
Man, download original Windows 6.5 ROM with Radio.
And run it. it doesn't need push any button. it sends you to 3-colored screen and installs win 6.5 ROM.
Later you can try magldr again or try your volume or power button.
powerofthink said:
Man, download original Windows 6.5 ROM with Radio.
And run it. it doesn't need push any button. it sends you to 3-colored screen and installs win 6.5 ROM.
Later you can try magldr again or try your volume or power button.
Click to expand...
Click to collapse
I don't think auto loading to bootloader works in magldr.
lqtdc said:
the button is not the problem. when the magldr 1.11 loads the button works ok.
Click to expand...
Click to collapse
If your volume button works then try to install an WP7 or android rom through dft. Why do you need to go into bootloader at the moment?
You seem stuck and may have a bricked phone, try this
hengsheng120 said:
I don't think auto loading to bootloader works in magldr.
If your volume button works then try to install an WP7 or android rom through dft. Why do you need to go into bootloader at the moment?
Click to expand...
Click to collapse
Seems you are stuck, maybe you want to try this:
1. Try to start your phone by holding Volume Down and then press the power button. Keep pressing the Volume down. You should you see the four-color (red, green, blue, white) bootloader screen
2. Check that it says 2.08.HSPL (if not, you should start by flashing the correct HSPL by connecting phone by USB and using HSLP4.exe (run as Administrator in Windows)
3. If you have the correct HSPL check that you have 2.15.50.14 Radio ROM installed. If not, you cannot proceed. (Tip: check every file you wodnload if has been correcty received)
4. If all the above things are correct you can flash MAGLDR 1.3) Still using Voluime Down and powes and the four-color (red, green, blue, white) bootloader screen
5. Now you can boot the phone by pressing and holiding down power. MAGLDR will boot, choos 5 USB Flash and flash your favourite version of Clockworkmod (250 Mb version recommended)
Now you are ready to use MAGLDR and/or Clockworkmod any way you want.
If you skip/downgrade and of use DAF update after 5, your phone will be confused as hell. In that case do a TASK29 and start again from step 1.
Alternatively get a copy of HD2-Tool and do all above steps with that. Its really good.
Hello!!
I have a dft nand rom running on my htc but now i wanted to get my htc back to stock, with the Windows mobile 6.5.. I know how to do it, the problem is,, in order to install the dft nand android i had to install the radio, MAGLDR, and the HSPL, and now i need to sync my device to my computer to get it back to stock, I tried the htc sync but it didn't work and by turning on my htc pressing the down volume and the power button it should go to the HSPL but it won't, it has disappeared from my device...
And to install the HSPL again i need to sync my htc to my computer, but i can't..
I would appreciate any kind of help.
Thanks
No syncing is required as far as I know. Boot into the bootloader (vol down+power) then flash the RUU (make sure you hold down both buttons until the bootloader appears). Since you say you can't do that (although you may have just been letting go of the buttons too early) just flash a newer Android ROM. The DFT one is extremely old and was really more of a proof of concept ROM than one which people regularly use.
Can you post a link of a more recent rom?
thanks
I am not using a DFT rom.. i was turning on my htc and i saw that i'm using a Desire_DL from DL Super Init
vol down+power is to go to the HSPL and that i can't do because my HSPL, i don't know why but, it's not there anymore.
Then you have the flash bootloader just by holding the power button..
And i have to install the stock rom with the active sync so i can erase all the MAGLDR and stuff and have my htc as i bought it..
I am having to much trouble with this android thing on my HD2
samnie25 said:
Can you post a link of a more recent rom?
thanks
Click to expand...
Click to collapse
Find one yourself, stop being so lazy.
samnie25 said:
I am not using a DFT rom.. i was turning on my htc and i saw that i'm using a Desire_DL from DL Super Init
Click to expand...
Click to collapse
That doesn't change the fact that it's an old ROM, flash a newer one.
samnie25 said:
vol down+power is to go to the HSPL and that i can't do because my HSPL, i don't know why but, it's not there anymore.
Then you have the flash bootloader just by holding the power button..
And i have to install the stock rom with the active sync so i can erase all the MAGLDR and stuff and have my htc as i bought it..
I am having to much trouble with this android thing on my HD2
Click to expand...
Click to collapse
Lol you need to read the guide in my sig which talks about the terms used for the HD2, volume down + power is to enter the bootloader, you can't 'enter HSPL', it's just something you have to flash.
First of all, i'm not being lazy, you said to install a recent rom, i'm sorry i don't know which are the new ones and the old ones...
Second,.. when you press volume down + power you will get to the HSPL which is an image splited in 4 parts, red, green, blue and white..
That screen its what you get by installing the HSPL and that is the thing missing in my htc, that it use to have but somehow it disappeared and i can't install it again because i can't sync my phone with the computer
The bootloader, you just hold the power button to enter it..
its the MAGLDR
At least in my phone when i hold just the power button it says there "Boot menu", among other things, like boot ad sd, boot ad nand, usb flasher..
So many "boot" words, it must be the bootloader i guess..
The volume down + power is to automatically sync your phone with the computer
I refuse to help you any more. You ARE being lazy, each ROM has a date next to it. You don't know what you're talking about yet you refuse to listen to me (trust me, I know a lot more than you on this subject) and you're not even making any sort of effort. Good luck sorting things out, but I just cba with you any more.
samnie25 said:
First of all, i'm not being lazy, you said to install a recent rom, i'm sorry i don't know which are the new ones and the old ones...
Second,..when you press volume down + power you will get to the HSPL which is an image splited in 4 parts, red, green, blue and white..
That screen its what you get by installing the HSPL and that is the thing missing in my htc , that it use to have but somehow it disappeared and i can't install it again because i can't sync my phone with the computer
The bootloader, you just hold the power button to enter it..
its the MAGLDR
At least in my phone when i hold just the power button it says there "Boot menu", among other things, like boot ad sd, boot ad nand, usb flasher..
So many "boot" words, it must be the bootloader i guess..
The volume down + power is to automatically sync your phone with the computer
Click to expand...
Click to collapse
As Nigel said, each ROM has a date which indicates the last time it was updated.
That is the bootloader screen, either SPL or HSPL. And it can't be "missing". Because if you don't have that, your device wouldn't even boot. You just didn't-know-how-to/couldn't get to it, but it's there.
Again, that screen can't disappear. You may be having issues with your volume rockers. As a matter of fact, your phone is bricked if you don't have that, as I stated earlier.
MAGLDR is indeed a bootloader, but it's not the device's main bootloader.
Wow, just wow. Not because there are many "boot"s, it's a bootloader. The main bootloader of the device is the H/SPL (volume down + end)
i.e. the main bootloader.
Click here for more information about HSPL and MAGLDR.
My volume rockers are working good.. First i thought they were not working well but i checked several times and they seem good.
When i press volume down + power it just goes to the MAGLDR and i know that it shouldn't go.. So i guess my HSPL disappeared somehow..
And i know that in order to install it again, the device must be sync with the computer, but i downloaded the htc sync and it doesn't recognize my phone.
Or as you said "that screen can't disappear" is there any other way to enter it?
... but ... seriously? After all what I had said, you still insist that you don't have HSPL and you need to install it?
Dude, without H/SPL, MAGLDR WILL NOT BOOT.
If you want to go to the bootloader, you must press and HOLD the volume down and boot WHILE STILL holding the volume down.
If you mean the bootloader then call it the bootloader, stop calling it 'the HSPL'. Try this solution from walts
walts said:
Hold Volume Down. Press and hold Reset until you see the BootLoader screen. Reset is the hidden button under the battery cover, lower left side below the SD card slot. You need a plastic or wooden stylus (toothpick will work). DON'T use a pencil, the graphite can get into the button and short it.
I just did it to be sure. It works.
HTH
Walt
Click to expand...
Click to collapse
hspl
Marvlesz said:
... but ... seriously? After all what I had said, you still insist that you don't have HSPL and you need to install it?
Dude, without H/SPL, MAGLDR WILL NOT BOOT.
If you want to go to the bootloader, you must press and HOLD the volume down and boot WHILE STILL holding the volume down.
Click to expand...
Click to collapse
I don't know if it is there or not.. i press volume down and power button and it just doesn't go to that colorful screen.. I've did it before, to get my htc back to stock with the windows mobile rom.
but now it doens't work,. it's like i am not pressing the volume down... if i hold volume down and hold power button it goes to the MAGLDR (Where we have a bunch of options) and if i hold volume down and just press power button (Without holding) it just loads the rom... it's like i am not pressing the volume down, but it is working, i can up and down the volume and i can go up and down through the option in the MAGLDR menu..
So, i don't know
But thanks
HTC
Nigeldg said:
If you mean the bootloader then call it the bootloader, stop calling it 'the HSPL'. Try this solution from walts
Click to expand...
Click to collapse
Just tried that, with the reset.. didn't work.
but thank.
I guess there must be some problem with the volume controller...
i will open the phone and try..
but thank you all for the time