Related
hi guys i flashed my htc hd2 wm6.5 to nand android rom in 1st 1 week of usage i have no problem and enjoyed the nand android rom in my htc hd2 until one day my hd2 hang and when i reboot my unit it was hang on splash screen only....
i reflashed it using magdlr ver. 1.11 into the same nand rom im using but i have no luck...it still stock on tje android splash screen...what will i do guys?
im planning to flash it to wm6.5 rom,but what will i do?it never boot on tri color screen it only boot on magdlr screen
and how can i flash it wm6.5 rom cook or stock rom i want to revert it back to wm6.5
my hd2 running on gingerbread 2.3.3 nand(V1.8) rom before it malfunction..
Well, my forensic analysis has come up with the following technical and somewhat difficult solution to your present problem: "Click the search button"
Now I know it may sound intimidating, but I tested that feature out for you and came up with this:
http://forum.xda-developers.com/showthread.php?t=905841
matt
Shut down completely your phone (remove batter for 15 sec too)
Place battery back and now hold volume down button.
Still hold volume down button and switch on your phone.
You get 3 color screen.
Now attach your usb cable and connect it to PC
Find on this forum your phone stock win mobile rom (link to officila roms thread)
Run stock win 6.5 rom exe (this is sample name: RUU_Leo_S_HTC_WWE_EastEurope_3.14.479.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe)
Follow instructions on your PC screen. On final your phone reboots.
Enjoy your stock phone.
hi datasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
can i flash wm6.5 rom into magdlr usb flasher?
siapelbo said:
hi dasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
Click to expand...
Click to collapse
Switch off, hold vol down button in and switch on.
As ClydeB1, states you must hold the vol down only and not hold the power button.
siapelbo said:
hi dasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
Click to expand...
Click to collapse
when you get ready to power back on you have to hold volume down and keep holding it while is booting and it should switched to the tricolored screen, plug the usb cable and it should say usb at the bottom when it connects, and if you have hardspl which I know you have after running android, you can use any custom winmo6.5 rom it doesn't have to be an official rom.
can i flash wm6.5 rom into magdlr usb flasher?
No, flash from bootloader.
awts...i cant enter into booloader mode....im so sure what im doing i sure i follow the instructions of you guys....holding down the vol button and switch on
Are you holding it at the bottom of the button and not in the middle or top, ie as if you are turning the volume down?
I don't think you can flash WM6.5 with flasher. You have to restore from recovery screen by remove battery and restore.
ClydeB1 said:
Are you holding it at the bottom of the button and not in the middle or top, ie as if you are turning the volume down?
Click to expand...
Click to collapse
yeah im sure i was holding down the volume botton and switch the power on
Does the vol down button work normally in the Android rom or when moving around in magldr. To be sure, remove the battery and leave it out for 10 minutes then put the battery back, leave the cover off and try again.
I have heard of one or two users who have also had a problem where the vol down button stopped working. If that is the case there is no way back AFAIK.
ClydeB1 said:
Does the vol down button work normally in the Android rom or when moving around in magldr. To be sure, remove the battery and leave it out for 10 minutes then put the battery back, leave the cover off and try again.
I have heard of one or two users who have also had a problem where the vol down button stopped working. If that is the case there is no way back AFAIK.
Click to expand...
Click to collapse
volume botton is perfectly working it work around in magdlr mode actually i flashed my hd2 into android rom right now flashing is done without problems, but its not boot normarly it boot only in splash screen....
can you guys post a link of task 29...i will try this method and flash stock rom
but the main problem is i cant enter into bootloader mode
I use this tool for Task29 - http://forum.xda-developers.com/showthread.php?t=917807
Once you run Task29 though it will wipe the NAND memory and magldr and if you can't get back to bootloader mode then you will be stuck on the splashscreen.
Hi,
I'm also having problems, but in my case the progress bar on my phone when installing the new ROM stops at 0% and will stay there indefinably. On my computer a connection problem will be raised.
The same happens with task29.
I've also tried decompressing ROM Utility, putted leoimg.nbh on my 2GB fat32 formatted sdcard, hold down the volume key.
I will get a new screen with "Loading..." on it, but it freezes there.
So, I have no idea what I'm doing wrong.
Any help will be appreciated.
Regards,
temporary_24 said:
Hi,
I'm also having problems, but in my case the progress bar on my phone when installing the new ROM stops at 0% and will stay there indefinably. On my computer a connection problem will be raised.
The same happens with task29.
I've also tried decompressing ROM Utility, putted leoimg.nbh on my 2GB fat32 formatted sdcard, hold down the volume key.
I will get a new screen with "Loading..." on it, but it freezes there.
So, I have no idea what I'm doing wrong.
Any help will be appreciated.
Regards,
Click to expand...
Click to collapse
Are you sure you still have hspl installed? In bootloader, check your spl version- it should end in hspl.
ClydeB1 said:
Are you sure you still have hspl installed? In bootloader, check your spl version- it should end in hspl.
Click to expand...
Click to collapse
Hi,
Yes. I had one with a 8 on it. I've installed the other, and it worked (or the other way). Thanks.
Regards,
guys my phone revive with a jtag procedure i went to a technician shop here in the phillipines
my phone running in stock rom again...
Please tell me how to upgrade from
MAGLDR 1.11 to MAGLDR 1.13.
Thanks
Sent from my HTC HD2 using XDA App
Sent from my HTC HD2 using XDA App
Is it hard? No.
Download 1.13
Put your phone bootloader (tricolor screen)
Connect to pc
Run romupdate exe
Read onscreen guides, make choice
Done
Enjoy your new MAGLDR
Sent from my HTC HD2 using Tapatalk
Im doing that but on romupdate shows me error because my phone is not sync with mobile device centar, but that is imposimble because phone is flashed with android
Sent from my HTC HD2 using XDA App
boki_thegame said:
Im doing that but on romupdate shows me error because my phone is not sync with mobile device centar, but that is imposimble because phone is flashed with android
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
me too have the same problem
I solved that. First you need to install HTC Sync for all HTC Android Phones (i cant post hyperlinks if you want i will send you link via DM ) and after you will can to upgrade MAGLDR
You don't need to install anything, just turn off phone, then turn back on holding down volume down button until you see tri-colour bootloader.
At the bottom you will see the word serial then plug into PC, thenafter a few seconds you'll see it change to usb, then flash 1.13.
Hope this helps
Sent from my HTC HD2 using XDA App
You don't need ActiveSync.
The ROM Update Utility .exe will recognize and skip to step starting with the tricolored screen (hold vol down and power on). Ie. it will recognize your phone from there on.
You can do this to update anything from NAND Rom, Radio, MAGLDR etc. once you are no longer tied to Windows Mobile (activesync). The ROM updater skips those steps.
Did it just now.
does it erase the setup you have on your phone? or can you just upgrade with no issues?
I'm interested, too, if there's any data loss.
I read somewhere something that after upgrade the android needs to be flashed again.
builtboosted said:
does it erase the setup you have on your phone? or can you just upgrade with no issues?
Click to expand...
Click to collapse
Shivan149 said:
I'm interested, too, if there's any data loss.
I read somewhere something that after upgrade the android needs to be flashed again.
Click to expand...
Click to collapse
No, flashing from 1.11 to 1.13 does not result in data loss (normally - to be safe I'd suggest taking a backup though)
ClydeB1 said:
No, flashing from 1.11 to 1.13 does not result in data loss (normally - to be safe I'd suggest taking a backup though)
Click to expand...
Click to collapse
Thanks! So I can update without much work after the update.
Shivan149 said:
Thanks! So I can update without much work after the update.
Click to expand...
Click to collapse
So I did it and no problems!
does updating MAGLDR 1.11 to 1.13 make u lose ur warenty. And does someone know when there is gonna be a new MAGLDR 1.14(?) on the market and will this be better then 1.13?
warranty? I think you can reverse and go back to stock for warranty. you already lose your warranty once you flash hspl anyways.
Sent from my HTC HD2 using Tapatalk
magldr 1.11 to 1.13
I'm trying to update from magldr 1.11 to 1.13 but every time I run the ROM update utility I get "Error [260]: Connection" & "the Update Utility cannot connect to your PDA phone." I have the tri-color bootloader screen, as well as USB on it. I'm already running a NAND Froyo build, just trying to switch to Gingerbread. I've tried searching this forum & the web for help without any success. Any help would be appreciated, thanks!
Angelo
how can i tell if this is installed on the phone. it is running on nand android
thanks
Power off the phone. Turn it one but Hold on to your power button until you see magldr menu. Might have to hold on.for like 20 sec
Sent from my HTC HD2 using XDA App
chef2 said:
how can i tell if this is installed on the phone. it is running on nand android
thanks
Click to expand...
Click to collapse
android is loaded by maglde or clk ...if u see a black screen with some caracteres and go go go at start than it's magldr ...if android boot directly than it's clk.
u can also try to hold power button at start than u will see the magldr menu if installed
cant put the phone in three color state with vol down + power.
any other way to flash magldr 1.13????
What do you mean you can enter the 3 color state? Do you have any issues with your hardware buttons?
lqtdc said:
cant put the phone in three color state with vol down + power.
any other way to flash magldr 1.13????
Click to expand...
Click to collapse
You should really get your volume button checked. If its a hardware problem, then it can be fixed. Otherwise its bricked
If you have fastboot installed on your computer you can..
Extract the zimage from the zip file
then while phone is on and connected via usb (adb debugging on)
adb reboot-bootloader
then when in bootloader mode
fastboot flash zimage zimage
fastboot reboot
Hope this helps..
smokers said:
What do you mean you can enter the 3 color state? Do you have any issues with your hardware buttons?
Click to expand...
Click to collapse
no the button work ok. when i press in magldr 1.11 works ok.
shanman-2 said:
If you have fastboot installed on your computer you can..
Extract the zimage from the zip file
then while phone is on and connected via usb (adb debugging on)
adb reboot-bootloader
then when in bootloader mode
fastboot flash zimage zimage
fastboot reboot
Hope this helps..
Click to expand...
Click to collapse
sorry, to do this i have to be in android, dont???
Yep
Sent from my Nexus One using xda premium
there is a chance that the problem was the radio???
i dont check the radio. any way to flash tne 2.15 radio without the 3 color screen???
shanman-2 said:
Yep
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
sorry but i dont have a android to flash without recovery
lqtdc said:
there is a chance that the problem was the radio???
i dont check the radio. any way to flash tne 2.15 radio without the 3 color screen???
Click to expand...
Click to collapse
No.
Have you got the hd2 Nand toolkit?
What s the set up on the phone?
Spl etc
Sent from my Nexus One using xda premium
i have the 2.08 SPL or HSPL i dont remenber but i can put the magldr 1.11 with the romutility from windows but now i cant put in bootloader screen to put the magldr 1.13. i dont check the value of the radio.
Just in case ..are you holding volume down button and pressing and releasing power button while still holding volume button?
It really looks like there is a prob with the volume. As was said already it can be fixed
A cracked volume ribbon cable is not uncommon! !
Sent from my Nexus One using xda premium
the button is not the problem. when the magldr 1.11 loads the button works ok.
Magldr does not change the radio!
What exactly did you so?
Sent from my Nexus One using xda premium
i dont check the radio when install the magldr 1.11.
first i install the 2.08 HSPL, then with the ROMUpdateUtility install MAGLDR 1.11.
i never can put the phone in bootloader mode, that is my problem. i dont know what is the radio
i would suggest making a clear install using the task29 or WM1.66 instal ect.
you have to hold the vol down button while loading
I hav had a problem with magldr1.13 which was caused by the radio - it didnt want to install on the 2.15.50.14 radio and i have had to downgrade my radio, install magldr1.13 and the update the radio to the 2.50.15.14.
but still consider a fresh install of all things to eliminate some stuff staying in the nand memory after such things ...
my problem is i cant put the phone in bootloader mode (Vol Down + Power).
Man, download original Windows 6.5 ROM with Radio.
And run it. it doesn't need push any button. it sends you to 3-colored screen and installs win 6.5 ROM.
Later you can try magldr again or try your volume or power button.
powerofthink said:
Man, download original Windows 6.5 ROM with Radio.
And run it. it doesn't need push any button. it sends you to 3-colored screen and installs win 6.5 ROM.
Later you can try magldr again or try your volume or power button.
Click to expand...
Click to collapse
I don't think auto loading to bootloader works in magldr.
lqtdc said:
the button is not the problem. when the magldr 1.11 loads the button works ok.
Click to expand...
Click to collapse
If your volume button works then try to install an WP7 or android rom through dft. Why do you need to go into bootloader at the moment?
You seem stuck and may have a bricked phone, try this
hengsheng120 said:
I don't think auto loading to bootloader works in magldr.
If your volume button works then try to install an WP7 or android rom through dft. Why do you need to go into bootloader at the moment?
Click to expand...
Click to collapse
Seems you are stuck, maybe you want to try this:
1. Try to start your phone by holding Volume Down and then press the power button. Keep pressing the Volume down. You should you see the four-color (red, green, blue, white) bootloader screen
2. Check that it says 2.08.HSPL (if not, you should start by flashing the correct HSPL by connecting phone by USB and using HSLP4.exe (run as Administrator in Windows)
3. If you have the correct HSPL check that you have 2.15.50.14 Radio ROM installed. If not, you cannot proceed. (Tip: check every file you wodnload if has been correcty received)
4. If all the above things are correct you can flash MAGLDR 1.3) Still using Voluime Down and powes and the four-color (red, green, blue, white) bootloader screen
5. Now you can boot the phone by pressing and holiding down power. MAGLDR will boot, choos 5 USB Flash and flash your favourite version of Clockworkmod (250 Mb version recommended)
Now you are ready to use MAGLDR and/or Clockworkmod any way you want.
If you skip/downgrade and of use DAF update after 5, your phone will be confused as hell. In that case do a TASK29 and start again from step 1.
Alternatively get a copy of HD2-Tool and do all above steps with that. Its really good.
Hello!!
I have a dft nand rom running on my htc but now i wanted to get my htc back to stock, with the Windows mobile 6.5.. I know how to do it, the problem is,, in order to install the dft nand android i had to install the radio, MAGLDR, and the HSPL, and now i need to sync my device to my computer to get it back to stock, I tried the htc sync but it didn't work and by turning on my htc pressing the down volume and the power button it should go to the HSPL but it won't, it has disappeared from my device...
And to install the HSPL again i need to sync my htc to my computer, but i can't..
I would appreciate any kind of help.
Thanks
No syncing is required as far as I know. Boot into the bootloader (vol down+power) then flash the RUU (make sure you hold down both buttons until the bootloader appears). Since you say you can't do that (although you may have just been letting go of the buttons too early) just flash a newer Android ROM. The DFT one is extremely old and was really more of a proof of concept ROM than one which people regularly use.
Can you post a link of a more recent rom?
thanks
I am not using a DFT rom.. i was turning on my htc and i saw that i'm using a Desire_DL from DL Super Init
vol down+power is to go to the HSPL and that i can't do because my HSPL, i don't know why but, it's not there anymore.
Then you have the flash bootloader just by holding the power button..
And i have to install the stock rom with the active sync so i can erase all the MAGLDR and stuff and have my htc as i bought it..
I am having to much trouble with this android thing on my HD2
samnie25 said:
Can you post a link of a more recent rom?
thanks
Click to expand...
Click to collapse
Find one yourself, stop being so lazy.
samnie25 said:
I am not using a DFT rom.. i was turning on my htc and i saw that i'm using a Desire_DL from DL Super Init
Click to expand...
Click to collapse
That doesn't change the fact that it's an old ROM, flash a newer one.
samnie25 said:
vol down+power is to go to the HSPL and that i can't do because my HSPL, i don't know why but, it's not there anymore.
Then you have the flash bootloader just by holding the power button..
And i have to install the stock rom with the active sync so i can erase all the MAGLDR and stuff and have my htc as i bought it..
I am having to much trouble with this android thing on my HD2
Click to expand...
Click to collapse
Lol you need to read the guide in my sig which talks about the terms used for the HD2, volume down + power is to enter the bootloader, you can't 'enter HSPL', it's just something you have to flash.
First of all, i'm not being lazy, you said to install a recent rom, i'm sorry i don't know which are the new ones and the old ones...
Second,.. when you press volume down + power you will get to the HSPL which is an image splited in 4 parts, red, green, blue and white..
That screen its what you get by installing the HSPL and that is the thing missing in my htc, that it use to have but somehow it disappeared and i can't install it again because i can't sync my phone with the computer
The bootloader, you just hold the power button to enter it..
its the MAGLDR
At least in my phone when i hold just the power button it says there "Boot menu", among other things, like boot ad sd, boot ad nand, usb flasher..
So many "boot" words, it must be the bootloader i guess..
The volume down + power is to automatically sync your phone with the computer
I refuse to help you any more. You ARE being lazy, each ROM has a date next to it. You don't know what you're talking about yet you refuse to listen to me (trust me, I know a lot more than you on this subject) and you're not even making any sort of effort. Good luck sorting things out, but I just cba with you any more.
samnie25 said:
First of all, i'm not being lazy, you said to install a recent rom, i'm sorry i don't know which are the new ones and the old ones...
Second,..when you press volume down + power you will get to the HSPL which is an image splited in 4 parts, red, green, blue and white..
That screen its what you get by installing the HSPL and that is the thing missing in my htc , that it use to have but somehow it disappeared and i can't install it again because i can't sync my phone with the computer
The bootloader, you just hold the power button to enter it..
its the MAGLDR
At least in my phone when i hold just the power button it says there "Boot menu", among other things, like boot ad sd, boot ad nand, usb flasher..
So many "boot" words, it must be the bootloader i guess..
The volume down + power is to automatically sync your phone with the computer
Click to expand...
Click to collapse
As Nigel said, each ROM has a date which indicates the last time it was updated.
That is the bootloader screen, either SPL or HSPL. And it can't be "missing". Because if you don't have that, your device wouldn't even boot. You just didn't-know-how-to/couldn't get to it, but it's there.
Again, that screen can't disappear. You may be having issues with your volume rockers. As a matter of fact, your phone is bricked if you don't have that, as I stated earlier.
MAGLDR is indeed a bootloader, but it's not the device's main bootloader.
Wow, just wow. Not because there are many "boot"s, it's a bootloader. The main bootloader of the device is the H/SPL (volume down + end)
i.e. the main bootloader.
Click here for more information about HSPL and MAGLDR.
My volume rockers are working good.. First i thought they were not working well but i checked several times and they seem good.
When i press volume down + power it just goes to the MAGLDR and i know that it shouldn't go.. So i guess my HSPL disappeared somehow..
And i know that in order to install it again, the device must be sync with the computer, but i downloaded the htc sync and it doesn't recognize my phone.
Or as you said "that screen can't disappear" is there any other way to enter it?
... but ... seriously? After all what I had said, you still insist that you don't have HSPL and you need to install it?
Dude, without H/SPL, MAGLDR WILL NOT BOOT.
If you want to go to the bootloader, you must press and HOLD the volume down and boot WHILE STILL holding the volume down.
If you mean the bootloader then call it the bootloader, stop calling it 'the HSPL'. Try this solution from walts
walts said:
Hold Volume Down. Press and hold Reset until you see the BootLoader screen. Reset is the hidden button under the battery cover, lower left side below the SD card slot. You need a plastic or wooden stylus (toothpick will work). DON'T use a pencil, the graphite can get into the button and short it.
I just did it to be sure. It works.
HTH
Walt
Click to expand...
Click to collapse
hspl
Marvlesz said:
... but ... seriously? After all what I had said, you still insist that you don't have HSPL and you need to install it?
Dude, without H/SPL, MAGLDR WILL NOT BOOT.
If you want to go to the bootloader, you must press and HOLD the volume down and boot WHILE STILL holding the volume down.
Click to expand...
Click to collapse
I don't know if it is there or not.. i press volume down and power button and it just doesn't go to that colorful screen.. I've did it before, to get my htc back to stock with the windows mobile rom.
but now it doens't work,. it's like i am not pressing the volume down... if i hold volume down and hold power button it goes to the MAGLDR (Where we have a bunch of options) and if i hold volume down and just press power button (Without holding) it just loads the rom... it's like i am not pressing the volume down, but it is working, i can up and down the volume and i can go up and down through the option in the MAGLDR menu..
So, i don't know
But thanks
HTC
Nigeldg said:
If you mean the bootloader then call it the bootloader, stop calling it 'the HSPL'. Try this solution from walts
Click to expand...
Click to collapse
Just tried that, with the reset.. didn't work.
but thank.
I guess there must be some problem with the volume controller...
i will open the phone and try..
but thank you all for the time