Database Users

[Q] Is my HD2 bricked? What can I do?

Hi there everyone!
I installed a NAND Android Rom Dl Desire Z or something... everything was working, but suddendly phone just crashes, and nothing but a white screen appear as soon as HD2 powers on.
The only thing i'm able to do is to go to 3 color mode (hardspl) - but all attempts to flash a wm6.5 rom failed because customruu failed in the middle of the process. freezes at 0% and then appears a communication error in the application.
Conclusion: as soon as phone turns on, only a white screen appears, with nothing written in it.
i've searched for 2 hours in xda and google, nothing similar came...
i've reflashed hardspl3 - sucessfull, but nothing changed, white screen still appears.
i've tried to flash other roms but always freezes at 0%, and appears communication error in customruu application.
I don't know what to do :/
Is there anyone who can help me?
Thank you very much!!

If you can still get into bootloader and you do have hspl installed, try flashing the winmo rom via sd card.

Will do!
I'll post feedback

Start flashing official 1.66(its EU, you need analog to 1024 LEO) WM 6.5 rom from HSPL, than HPSL3, radio with 576 RAM(Radio_2.15.50.14 for example), than MAGLDR112, and after these steps flash Android

Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!

Hello
Im thinking maybe your motherboard as many tmous users ?.. just thinking..maybe?? I don't hope it for you
Sent from my HTC HD2 using XDA App

It doesn't make sense :S
I never had any problem with it, and it was running a new Android rom for the second time.. then I take the phone out of the pocket and it is with a white screen...
I can get to the hspl boot but it isn't proving useful...
Any thoughts?

[Q] Stuck on white screen while booting up.

Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?

enadiz said:
Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?
Click to expand...
Click to collapse
Try re-flashing HSPL.

I'm having the exact same problem.
I have opened a thread with this question few hours ago
Is there someone who can help us?
@digital outcast
re-flashing hardspl did not make the slightest change... :S

I assume both of you have tried flashing back to a WinMo ROM right? Does that flash to it ok and provide the same end result (white screen)?

in my case, it doesn't even flash because when CustomRUU starts, and the process begins (everything normal), the indicator freezes at 0% until it gives a communication error and all process is aborted!

the indicator freezes at 0%
Click to expand...
Click to collapse
When you flashing WinMo? If not(if you flashing android), I think problem is with wrong radio

And you tried a task 29 beforehand? Do you have any antivirus / firewall software running that you can disable temporarily?

Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!

tpmonteiro said:
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
Click to expand...
Click to collapse
Ditto, I have not tried the 1.66 Wmo rom though, will try that and MAGDLR 1.13 when I get back home later.
Anyone else who encountered this problem before? Thanks !

Can you go back to WINMO using LEOIMG.NBH and VOL.DOWN?
Can you boot into WINMO6.5 without problems?

Neither!
The update through HSPL is sucessfully completed, but when phone restarts, white screen appears immediately after...
I've also tried to flash other radios (the latest was installed) but the update fails everytime (through hspl).
I had MAGLDR 1.12 installed and it ran before booting the OS (android), but the white screens appears before that.
Damn!!!
Any ideas?

It actually looks like this when I try to flash a stock rom + radio over the SD card.. http://forum.xda-developers.com/showthread.php?t=618084
UPDATE FAIL

[Q] HD2 Android install - radio flashing question

Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
I followed step one with hspl and got the We've hacked it message
Next stage is radio flash via Custom RUU
I run the RUU and the install hits 100% (only takes about 30seconds to flash not the ten minutes stated on the dialogue screen on the pc)
the problem is the phone reboots to the white screen with Green HTC logo and freezes at this point. It doesnt run a full reboot.
When I try to reflash the RUU fails.
Could this be a faulty radio image? If so can some one post a link to a mirror for the best radio for the HD2?
I will try the other suggestions of different usb ports etc.
BTW I am using the latest Win mobile Center and have the RUU running as administrater.
Many thanks
Gurry

gurry said:
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
I followed step one with hspl and got the We've hacked it message
Next stage is radio flash via Custom RUU
I run the RUU and the install hits 100% (only takes about 30seconds to flash not the ten minutes stated on the dialogue screen on the pc)
the problem is the phone reboots to the white screen with Green HTC logo and freezes at this point. It doesnt run a full reboot.
When I try to reflash the RUU fails.
Could this be a faulty radio image? If so can some one post a link to a mirror for the best radio for the HD2?
I will try the other suggestions of different usb ports etc.
BTW I am using the latest Win mobile Center and have the RUU running as administrater.
Many thanks
Gurry
Click to expand...
Click to collapse
Here's the radio you want dude:
http://www.multiupload.com/QP0IWGY42F
reply back if having problems or pm me.
matt

Hmmm, few questions........
What kind of HD2 do you have.. US, European??
What radio do you currently have?
What radio are you trying to flash?
Can you get to bootloader (3 coloured screen) by turning on while holding vol. down?

gurry said:
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
Click to expand...
Click to collapse
Can you enter Bootloader Mode and verify that your HardSPL install completed successfully and that you now have SPL-2.08.HSPL on the second line.
If that is ok then try flashing the Radio using the SD Card method as stated in my flashing guide (renaming the nbh file to LEOIMG.nbh copy to the root of your storage card and reboot into bootloader mode).
Mark.

Im confused now - I did the update again after flashing a stock rom via the sd card method. The radio updated and the rom started the self set up sequence.
I removed the battery - re ran hspl loaded fine,
confirmed its installed rebooted fine to rom rom.
powered off back into boot loader ran custom ruu - the progress bar ran to 100%. Phone rebooted and again is stuck at the green htc logo on the white backgroud with no radio details in the bottom left hand corner?
I re downloaded the file for the radio so ts wasnt corrupted.
Ill try the leoimg.nbh method see if that works.
WELL Thanks to the replies and starting AGAIN from scratch and updating the radio the sd card way Ive gotten it all working.
thanks for all the info.
Sometimes a little patience and a fresh pair of eyes so to speak - works wonders
Gurry

What radio? Cos the symptoms sound like what happens when you load a 51 radio with a 576 enabled rom.... ie it hangs at RGD info screen without any RGD info showing.

HELP HTC Logo only showing after flashing rom

Hi All,
2 nights ago I flashed my HD2 without any issues following this http://forum.xda-developers.com/showthread.php?t=893948 and http://forum.xda-developers.com/showthread.php?t=609477. Now a friend saw how well Android ran and asked me to do the same on his.....
His phone is (Or was) identical to mine and I have used the exact same files to update the radio and the Rom..
Now, I have updated the Rom and I am only being shown the HTC logo when booting and it gets no further. Removing the battery and holding the power button does nothing.. I can get into the boot loader and that's it.
Any ideas what the issue is and how to resolve it?
Many Thanks in advance

Firstly, do you see ".hspl" in bootloader? If you do, then phone has been unlocked. Next, your MAGLDR hasn't flashed properly I guess. When you boot the phone does it show 2.1x.xx as the radio version? This might be the problem, because when you flash MAGLDR without the appropriate radio version, it stucks on the green logo.
Just repeat the procedure again, that should fix it.
First, 2.08.hspl (if not already unlocked)
Then Radio ROM
Then MAGLDR
Then DAF ROM or CWM

HI, first off many I thank you for your prompt reply
I ended it going back to the 3.14 stock rom from this page http://forum.xda-developers.com/showthread.php?t=623283 and then going back through the processes...
All seems to be in fine working order now... must say I was somewhat bricking it!! lol

HD2 power on but won't boot. stuck on htc screen

hey guys. so i got my hands on a buddy's hd2 to help flash but entering the tri-color bootloader and trying to flash it to a 6.5 rom, it shows that it does not have a previous image.
anyway, i go on trying to flash it but everytime is says error: corrupted image file.
any help?
edit: it's world wide HD2
edit 2:
it's just stuck on HTC Screen. plain white with HTC in the middle. does not go into WinMo6.5

HardSPL. Looks like you don't have it.

got 2.08 HSPL

The update utility never shows a previous version when you enter bootloader manually, because it pulls that info from the registry, which is inaccessible from bootloader.

i managed to flash the Energy ROM winmo6.5 using an sd card.
it stays on the splash screen and does not boot to OS. :\??

you need to flash the custom ruu inside the custom rom itself. not an sd card

only if i could. i cant access OS.