HELP HTC Logo only showing after flashing rom - HD2 Android Q&A, Help & Troubleshooting and Genera

Hi All,
2 nights ago I flashed my HD2 without any issues following this http://forum.xda-developers.com/showthread.php?t=893948 and http://forum.xda-developers.com/showthread.php?t=609477. Now a friend saw how well Android ran and asked me to do the same on his.....
His phone is (Or was) identical to mine and I have used the exact same files to update the radio and the Rom..
Now, I have updated the Rom and I am only being shown the HTC logo when booting and it gets no further. Removing the battery and holding the power button does nothing.. I can get into the boot loader and that's it.
Any ideas what the issue is and how to resolve it?
Many Thanks in advance

Firstly, do you see ".hspl" in bootloader? If you do, then phone has been unlocked. Next, your MAGLDR hasn't flashed properly I guess. When you boot the phone does it show 2.1x.xx as the radio version? This might be the problem, because when you flash MAGLDR without the appropriate radio version, it stucks on the green logo.
Just repeat the procedure again, that should fix it.
First, 2.08.hspl (if not already unlocked)
Then Radio ROM
Then MAGLDR
Then DAF ROM or CWM

HI, first off many I thank you for your prompt reply
I ended it going back to the 3.14 stock rom from this page http://forum.xda-developers.com/showthread.php?t=623283 and then going back through the processes...
All seems to be in fine working order now... must say I was somewhat bricking it!! lol

Related

stuck after installing MAGLDR while installing NAND

oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Did you try reading the flashing instructions. Refer to the Flashing NAND Android rom link in my signature. The problem is that you probably have the wrong radio. Also please don't start new threads to ask questions when threads already exist. This thread will soon be moved.
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
remove battery
enter HSPL via bootloader (have you got HSPL 2.08)??
(long press volume down + briefly press power button)
btw wrong post here mate
Moved to HD2 Android Q&A and General
I got the same problem with SPL 2.08.HSPL, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
sanroman said:
I got the same problem with HSPL 2.08, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
Click to expand...
Click to collapse
Are you sure your spl version is 2.08.hspl and NOT 2.08.0000?
Completly!. SPL-2.08.HSPL as stated on tricolor screen. Thanks for the response.
And you also sure of the radio version? Really strange that it doesn't work. Where exactly does it get stuck, is it after or during the install of magldr?
Absolutely sure. All info is the one shown in the device. MAGDLR installs perfectly at 100%, it stucks at reboot, it shows the white htc screen and that's all, the device doen't work any more and I've to reinstall oficial rom.
Really weird - first one I've seen where 2.08.hspl and 2.15.50 radio doesn't get magldr to boot. Not sure what else to suggest apart from perhaps doing a Task29 to format the NAND area and starting all over.
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
There are the Android versions that run off sd card which run as a dual boot with winmo.
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
Check your radio version - I had the same issue but after updating my radio everything was fine!
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
well, maybe its kinda "stupid" question, but do you press the power (red) button while booting? I mean, you have to press it long enough, till the magldr menu comes up..
Believe me that i've tested that way, and another ones, so as to get it work, but no luck.
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
mikelt89 said:
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
Click to expand...
Click to collapse
Format the sd card. I would also suggest flashing back to a winmo rom and then starting over.
chpelle said:
Check your radio version - I had the same issue but after updating my radio everything was fine!
Click to expand...
Click to collapse
Rerereinstalled and no luck. Why me?
I have the same problem. I have checked the radio and everything to make sure it is fine but still getting stuck at htc screen??
Can someone help me please
Thanks
cwm recovery
flashed cwm recovery update for hd2 no my phone wont charge nor register when plugged into the computer. is there a way to fix this

[Q] Stuck on white screen while booting up.

Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?
enadiz said:
Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?
Click to expand...
Click to collapse
Try re-flashing HSPL.
I'm having the exact same problem.
I have opened a thread with this question few hours ago
Is there someone who can help us?
@digital outcast
re-flashing hardspl did not make the slightest change... :S
I assume both of you have tried flashing back to a WinMo ROM right? Does that flash to it ok and provide the same end result (white screen)?
in my case, it doesn't even flash because when CustomRUU starts, and the process begins (everything normal), the indicator freezes at 0% until it gives a communication error and all process is aborted!
the indicator freezes at 0%
Click to expand...
Click to collapse
When you flashing WinMo? If not(if you flashing android), I think problem is with wrong radio
And you tried a task 29 beforehand? Do you have any antivirus / firewall software running that you can disable temporarily?
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
tpmonteiro said:
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
Click to expand...
Click to collapse
Ditto, I have not tried the 1.66 Wmo rom though, will try that and MAGDLR 1.13 when I get back home later.
Anyone else who encountered this problem before? Thanks !
Can you go back to WINMO using LEOIMG.NBH and VOL.DOWN?
Can you boot into WINMO6.5 without problems?
Neither!
The update through HSPL is sucessfully completed, but when phone restarts, white screen appears immediately after...
I've also tried to flash other radios (the latest was installed) but the update fails everytime (through hspl).
I had MAGLDR 1.12 installed and it ran before booting the OS (android), but the white screens appears before that.
Damn!!!
Any ideas?
It actually looks like this when I try to flash a stock rom + radio over the SD card.. http://forum.xda-developers.com/showthread.php?t=618084
UPDATE FAIL

[Q] HD2 Android install - radio flashing question

Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
I followed step one with hspl and got the We've hacked it message
Next stage is radio flash via Custom RUU
I run the RUU and the install hits 100% (only takes about 30seconds to flash not the ten minutes stated on the dialogue screen on the pc)
the problem is the phone reboots to the white screen with Green HTC logo and freezes at this point. It doesnt run a full reboot.
When I try to reflash the RUU fails.
Could this be a faulty radio image? If so can some one post a link to a mirror for the best radio for the HD2?
I will try the other suggestions of different usb ports etc.
BTW I am using the latest Win mobile Center and have the RUU running as administrater.
Many thanks
Gurry
gurry said:
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
I followed step one with hspl and got the We've hacked it message
Next stage is radio flash via Custom RUU
I run the RUU and the install hits 100% (only takes about 30seconds to flash not the ten minutes stated on the dialogue screen on the pc)
the problem is the phone reboots to the white screen with Green HTC logo and freezes at this point. It doesnt run a full reboot.
When I try to reflash the RUU fails.
Could this be a faulty radio image? If so can some one post a link to a mirror for the best radio for the HD2?
I will try the other suggestions of different usb ports etc.
BTW I am using the latest Win mobile Center and have the RUU running as administrater.
Many thanks
Gurry
Click to expand...
Click to collapse
Here's the radio you want dude:
http://www.multiupload.com/QP0IWGY42F
reply back if having problems or pm me.
matt
Hmmm, few questions........
What kind of HD2 do you have.. US, European??
What radio do you currently have?
What radio are you trying to flash?
Can you get to bootloader (3 coloured screen) by turning on while holding vol. down?
gurry said:
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
Click to expand...
Click to collapse
Can you enter Bootloader Mode and verify that your HardSPL install completed successfully and that you now have SPL-2.08.HSPL on the second line.
If that is ok then try flashing the Radio using the SD Card method as stated in my flashing guide (renaming the nbh file to LEOIMG.nbh copy to the root of your storage card and reboot into bootloader mode).
Mark.
Im confused now - I did the update again after flashing a stock rom via the sd card method. The radio updated and the rom started the self set up sequence.
I removed the battery - re ran hspl loaded fine,
confirmed its installed rebooted fine to rom rom.
powered off back into boot loader ran custom ruu - the progress bar ran to 100%. Phone rebooted and again is stuck at the green htc logo on the white backgroud with no radio details in the bottom left hand corner?
I re downloaded the file for the radio so ts wasnt corrupted.
Ill try the leoimg.nbh method see if that works.
WELL Thanks to the replies and starting AGAIN from scratch and updating the radio the sd card way Ive gotten it all working.
thanks for all the info.
Sometimes a little patience and a fresh pair of eyes so to speak - works wonders
Gurry
What radio? Cos the symptoms sound like what happens when you load a 51 radio with a 576 enabled rom.... ie it hangs at RGD info screen without any RGD info showing.

[Q] Need some help getting ANYTHING running on my HD2

Ok guys so I could use some help here. I bought a new (used) HD2 yesterday. It is the TMOUS version and I am having every problem I could possibly imagine with it. When I bought it the phone would only boot to the pink T-Mobile screen. It wouldn't go any further than that. I have been able to succesfully able to boot it into the 3 color bootloader screen and am able to flash HSPL using the HSPL4 program. I have successfully flashed both 2.08 and 3.03 HSPL. One time I was even able to flash MAGLDR 1.13 but when it booted into MAGLDR it only showed a black screen with MAGLDR at the top. It didn't give me any options to do anything. I believe that it is because MAGLDR only works with radio 2.15 from what I have read, but I can't seem to get that radio or any other for that matter to flash to the phone. It gets stuck at 96% then I get a connection error. I have no idea what radio it currently has or had as I have done a task 29 a couple of times and it flashes correctly but doesn't change anything. I have tried it on two different computers using 2 different operating systems (XP, WIN7). I have searched until my eyes bleed and done everything I can think of I have been working on this for a little over 12 hours now and I am ready to throw this phone against the wall, so could someone please help me save my sanity and get this thing working or at least tell me that I am SOL and nothing I can do will fix it.
Edit well now I think it is officially bricked. I tried flashing Radio Leo 2.15.50.14 that I got from DFT_LEO70_RELEASE and it stopped at 16%. The recovery wizard came up and I did exactly what it said and now the phone won' reboot into the bootloader or do anything for that matter.
if you get the 3 colour screen then it likely the phone will work, you need to start from scratch
use this thread http://forum.xda-developers.com/showthread.php?t=611433
I would task 29 then instal a stock rom, if that works and it should providing you have not installed an incorrect radio, then consider a custom rom
Have you tried pressing and holdingthe up and down Volume buttons and then press the power button?
The 2.15.50.14 would not normaly brick the phone iirc
time patience and following the instructions is what you need, Good luck

[Q] Can someone give me a bit of guidance? Possible brick..

Hey guys,
a friend of mine wanted to get Android onto his HD2, so he decided to screw around with the MAGLDR. He said he flashed something on there, but the phone is stuck on the HTC logo.
I managed to get into bootloader mode, I annotated the picture of the screen I get!
Can anybody help me, I would be glad to communicate with any human being
Best of regards!
That bootloader is fine.
Magldr wont start if the radio is wrong, flash radio 2.15.50, reboot, magldr will start. Its usually step 2 after flashing 2.08.hspl in all the guides, and it mentions it in the magldr thread.
Thanks, samsamuel! Really helped, I'm running ICS now
Thread can be closed, btw!

Categories

Resources