Database Users

Device not going on :(

Hi i got a HD2 but it wont start
I tryed difrent accu from a college and his device just start and mine not
Any help ?
Greatings
Marcel
EDIT: I got the device starting up in the color bars(bootloader) But i cant flash it

HD2 wont flash
Hi my previous post that the device wont turn on i closed that one.
I am at the tree color screen but when i want to flash a radio or os then it hangs at 0% also i cant hardspl the device.
I cant use the device at this moment

applied hspl?

must be purely coincidental, and something completely different, but my HD won't start up since this mornming either...
Question: Do you get an orange led while charging? If so, my connector is probably broken...

Any chance you could tell us what ROM you had previously and what you were trying to do. What are the details you see in BootLoader Mode?

Dont know
I dont know, I got the device from some one else hspl i cant install it or the application is crashing,
I applyd the offical rom from htc but it hangs at 9% and ad 7/99%
I realy get frustrated by this

Antonius123 said:
I dont know, I got the device from some one else hspl i cant install it or the application is crashing,
I applyd the offical rom from htc but it hangs at 9% and ad 7/99%
I realy get frustrated by this
Click to expand...
Click to collapse
So the chances are that the phone is without a ROM.
Now can you try and get into BootLoader Mode (with phone off, press and hold the Volume Down button then tap the Power button). Then tell us what it says.

I got in the bootloader:
PB81100 HX-BC
SPL-1.42.0000
MicroP(LED) 0x05
MicroP(Touch) 0x50
Upgrade Rom code error
Please try again
in the tob right corner: RUUNBH

ruunbh means it is in flash mode, 1.42.0000 means it is stock spl,
so
get hspl2,
put phone into bootloader,
connect phone to usb,
when 'serial' becomes 'usb' run hspl2,
when it reboots after 'we hacked it', hold vol down so tat you return to bootloader,
spl should now say 1.42.hspl
(or x.xx.hspl depends if you changed it in hspl2 dropdown, doesnt matter if you did or not, so long as it ends .hspl)
run your rom flash over usb. either stock rom.exe or customruu with cooked rom.

i did that and the hspl2 application hangs (i will post the error code in this )

Error code after running hspl2_RUN
critical error
Flow: 00000006
Error Code:00000000
Discription: Unkown

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dit is de error that i get

i guess your last chance is installing the rom via sd card.
do you know if it was branded?
you can check that by trying to download a rom with the S/N of your phone at htc.com.
the rom you can download, is the right one.
download it, unpack it, copy the .nbh on the sd card, rename it to leoimg.nbh and get your phone into bootloader.
DN41

trying it now,
got serial into htc and now downloading and deploying the file

isnt working
I dont know why but the device go into the color bars again and dont continiu i use a 4 gb sd card

does it start flashing? when does it stop (%)?
any infos shown?
DN41

First i get loading for like 5 minutes then it gos to the bootloader directly

could be the card, that happens on 8gb cards too, loading.... wait wait wait - bootloader.
2gb fat32 4096 (4k) block size for best results.

ok i am a little bit further
i download the hp format tool (i use them to create my own os disks etc)
I formatted the sd card with 4k fat32 and now it is updating so thubs crossd.

Hi update did complete,
It now hangs on the HTC Logo on boot :S (i think it is not my lucky day )
or is it taking first time very very long ?

Guide: Flashing WP 7 on your HD2

Okay, so I finally found the WP7 Rom and the new MAGLDR 112 that comes in the zip with it.
It's on DFTs forum.
I've uploaded the text file from DFT's forum which includes the download links for the ROM and MAGLDR 112(included in the ROM's zip file)
It's a pretty simple process if you've already flashed your own NAND Android ROM.
First I suggest you backup your SD card and your current NANDroid.
Then enter your bootloader (hold volume down and power button while device is off)
Connect to your computer and start the RomUpdateUtility provided in the MAGLDR112 folder.
Follow the prompts and update to MAGLDR 1.12
After that, your device should restart.
In MAGLDR 1.12 go to USB flasher and wait for the USB connection.
Then run the DWI (as Admin in Win7/Vista) and follow the prompts to install WP7.
After that the device will reboot and instead of booting into Android it will boot into WP7.
Simple
To activate Windows Live services follow this guide http://forum.xda-developers.com/showthread.php?t=912218
It's pretty straight forward.

hey hey!
i still have win6.5 stock rom installed.
do i need to do anything different like flash it to nand droid rom.
Sorry if the question is a stupid one.I am a real NOOB!
Thanks for guidlines!

elasticity19 said:
i still have win6.5 stock rom installed.
do i need to do anything different like flash it to nand droid rom.
Sorry if the question is a stupid one.I am a real NOOB!
Thanks for guidlines!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=893948
Follow this guide first, up until the point where it tells you to flash the Android ROM, instead flash the Windows Phone 7 ROM, and don't forget to install MAGLDR 1.12(from the WP7 Rom zip file and not the MAGLDR 1.11 from the link above)

THANKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

seriously out of topic question
will your android boot up from SD card if u're running WM7
in eg: copying all the Android folders into SD card, and booting clrad/haret?

My phone wont go into magloader after flashing it, i am simply stuck on the bootup screen.
Any ideas?

xandercom said:
My phone wont go into magloader after flashing it, i am simply stuck on the bootup screen.
Any ideas?
Click to expand...
Click to collapse
Same problem here

DanneG said:
Same problem here
Click to expand...
Click to collapse
Any ideas?
I have tried installing with both a 64bit and 32bit machine as another user suggested that might resolve it.
My next step is going to be reflashing of the NRG rom I installed, see if that will revert and then try again.

xandercom said:
Any ideas?
I have tried installing with both a 64bit and 32bit machine as another user suggested that might resolve it.
My next step is going to be reflashing of the NRG rom I installed, see if that will revert and then try again.
Click to expand...
Click to collapse
no idea, I have triead with a win 7 & win xp machine, same problem.
Everything runs without any problems, exept its stuck on the bootup screen

Do you have HSPL 2.08?
Sent from my HD2 using XDA App

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC Desire using Tapatalk

Solved it!
Download a new radio
I'm using Leo_RADIO_2.15.50.14 now
http://forum.xda-developers.com/showthread.php?t=611787

Hi, for me I have update to wp7 already but when I plug the USB to my PC the phone it don't show me anything...i can't syn I can't use it as USB drive..so what next that I next to do?

DanneG said:
Solved it!
Download a new radio
I'm using Leo_RADIO_2.15.50.14 now
http://forum.xda-developers.com/showthread.php?t=611787
Click to expand...
Click to collapse
Is it necessary to have that radio? I have the Tmous Leo and I have 2.10.50.26 (Im pretty sure) and I got through the installation process. I havent activated it yet, Im waiting on the downloads of the WPDK and all (slow internet). Everything seems to be working wonderfully except for 1 problem: if my screen is off for more than a minute or two, it wont turn back on and I have to yank the battery and restart my phone. Any way to fix that? So far, setting the screen to never turn off works fine, but that will kill my battery while not plugged in.

[Q] [Help] I've brick my HD2

after i try to flash my phone to android ROM via SD card, i think i've brick my HD2
i think i can go to the bootloader( the screen with blue,red,n green colour)
n i can connect to USB (as i see at the bootloader screen with the USB word at the bottom when i connect to my laptop)
after i switch on my phone, it appear this words
"The device is unable to boot because either you have turned off the device incorrectly or......." (as the picture i link)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so, is there anyway to solve this problem?

Press Volume Up to hard reset?

tried dy
also i try to use sspl to flash, but it stuck at 0%

some more info please:
1) how did you try to flash an Android ROM via sd card? Do you have magldr flashed?
2) Do you have HSPL flashed on the device?
Flashing an Android ROM from SD isn't possible from anything but magldr or CWM, so which one did you use?

orangekid said:
some more info please:
1) how did you try to flash an Android ROM via sd card? Do you have magldr flashed?
2) Do you have HSPL flashed on the device?
Flashing an Android ROM from SD isn't possible from anything but magldr or CWM, so which one did you use?
Click to expand...
Click to collapse
1. via SD Card, i click on CLRCAD inside the Android folder
2. my bootloader now showing SPL3.03

kelvinklose said:
1. via SD Card, i click on CLRCAD inside the Android folder
2. my bootloader now showing SPL3.03
Click to expand...
Click to collapse
Android does not work well with that SPL version.
Download HSPL4
tell it to flash SPL 2.08
Try launching clcrd and haret again.

i found this guys,http://forum.xda-developers.com/showthread.php?t=668347
now, stuck at step 14, which i cant enter any words in the M-TTY windows

orangekid said:
Android does not work well with that SPL version.
Download HSPL4
tell it to flash SPL 2.08
Try launching clcrd and haret again.
Click to expand...
Click to collapse
i dont have HSPL 4.
only get to update it to HSPL3.03

after update to HSPL3
my phone still hang at the HTC logo page,
after a while, it still show
"the device is unable to boot because either you have turned off........."
(same as the above pic)

i use SSPL to flash it to other ROM, hope it works
50% now

oh,, FINALLLY, i manage to flash back to my original ROM
thanks all the helping guys

kelvinklose said:
oh,, FINALLLY, i manage to flash back to my original ROM
thanks all the helping guys
Click to expand...
Click to collapse
lol, np.
for future reference:
http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
This is HSPL 4, it allows you to flash to different HSPL/SPL versions:
For flashing Android/WP7 or running Android I'd suggest using that to flash to HSPL 2.08

orangekid said:
lol, np.
for future reference:
http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
This is HSPL 4, it allows you to flash to different HSPL/SPL versions:
For flashing Android/WP7 or running Android I'd suggest using that to flash to HSPL 2.08
Click to expand...
Click to collapse
but i dont see HSPL 4 in the option
i only see
2.08
HSPL 2.08
3.03
HSPL 3.03

kelvinklose said:
but i dont see HSPL 4 in the option
i only see
2.08
HSPL 2.08
3.03
HSPL 3.03
Click to expand...
Click to collapse
What Orangekid means it is the fourth released HSPL which is called HSPL 4. You just have to coose which HSPL or SPL version you want to use. If you if you are wanting to put SPL back onto your HD2 then just make sure you flash a version with .0000 at the end.

"E1FATAL HIT 1" Problem.

I need help with this problem. I read the post and have them run what they say, but I still have the problem. When I give the option in MAGLDR "Ad Recovery", I get the following screen "1EFATAL HIT 1". I flashed with several options, I've done task 29, even I did hard reset and I returned the handset to factory defaults. But still the problem. I need help.

diwif said:
I need help with this problem. I read the post and have them run what they say, but I still have the problem. When I give the option in MAGLDR "Ad Recovery", I get the following screen "1EFATAL HIT 1". I flashed with several options, I've done task 29, even I did hard reset and I returned the handset to factory defaults. But still the problem. I need help.
Click to expand...
Click to collapse
Is this your first time trying MAGLDR and android on the HD2? If so do you have HSLP and the correct radio flashed? If you dont know then find a TUT that explains how to go from winmo to andoid tep by step.
Cheers,
Evil.

I have no problems installing Android rom for over a year. Lately install "ICS NexusHD2 CM9 (5.Feb.2012)." In a system reset occurred to me this problem. I've done hard factory reset, I installed HSPL 2, 3, 4, original SPL, etc. I changed several radios. I installed the original rom from sd, etc. MAGLDR I have reinstalled several times, just as with Recovery. No but I think it's internal memory, or not work properly. Do not know if changing the polarity on the battery, as when reversing the polarity on the stack for a PC. The truth is that I think has no solution.

Im right there with you my hd2 did this same thing and I have no answers either..

diwif said:
I have no problems installing Android rom for over a year. Lately install "ICS NexusHD2 CM9 (5.Feb.2012)." In a system reset occurred to me this problem. I've done hard factory reset, I installed HSPL 2, 3, 4, original SPL, etc. I changed several radios. I installed the original rom from sd, etc. MAGLDR I have reinstalled several times, just as with Recovery. No but I think it's internal memory, or not work properly. Do not know if changing the polarity on the battery, as when reversing the polarity on the stack for a PC. The truth is that I think has no solution.
Click to expand...
Click to collapse
tashsru said:
Im right there with you my hd2 did this same thing and I have no answers either..
Click to expand...
Click to collapse
Try this.
Download stock windows mobile rom
Extract LEOIMG.nbh from downloaded wm rom
format sd card
put nbh file onto root of sd card
shut down phone
power on phone and hold vol down + end key to enter bootloader
install stock windows mobile rom which uninstalls hspl and everything else
boot windows mobile
once booted turn off
install hspl again (2.08)
install magldr or clk
install cwm
reboot
install rom
reboot
I think that will fix your problems.

Hello
I followed all your instructions, but the problem persists. I put some pictures of the screens. A pulse is when the option MAGLDR "Ad Recovery", and the other is when I do the partitioning. Not if you serve something. Thanks anyway.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]
[/URL][/IMG]

diwif said:
Hello
I followed all your instructions, but the problem persists. I put some pictures of the screens. A pulse is when the option MAGLDR "Ad Recovery", and the other is when I do the partitioning. Not if you serve something. Thanks anyway.
[/URL][/IMG]
[/URL][/IMG]
Click to expand...
Click to collapse
:/ sorry I thought it would fix it.

check out this thread
http://forum.xda-developers.com/showthread.php?t=982454

nightmare
I have officially given up.. I think this hd2 is a lost cause I have tried everything and well its strange. I have a stock rom on it and its still the same. it boots bt freezes up after boot no response and only way to shut it off is to pull the battery. so i officially give up..

try sticking the phone in the freezer for couple min and flash it. if it works then u have hardware problem. happened to me when i received my cousins hd2, when i tried to flash it with android i got that e1fatal error. try it, it wont hurt.

[Q] Is this phone fixable?

Hi guys!
My friend got a HD2 which shows this screen when powered on:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bootloader reads the following:
Code:
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
"Upgrade ROM code error"
"Please try again"
I have no info about the phone's past, can the phone be debricked? I'm also interested if it's a serious problem, or just a matter of reflashing a stock rom?
Thanks in advance:
-Reedim

Try to reflash a stock rom, the previous user must have pulled the usb cable during a flash, causing a bad flash.

**MAKE SURE IF DO FLASH A ROM IT A T-MOBILE USA OR YOU MAY BRICK IT COMPLETELY IF FLASH A .51 RADIO
ROMs can be found in wiki with direct links for your model which is T-Mobile USA (TMOUS)

No, I had the same problem-I had found this site and it worked according to these instructions.
http://miui-germany.de/wp/?page_id=807

I agree with the previous posters. I get this error message a lot when something goes wrong during a flash. Just make sure to flash the correct rom from the tri colored boot menu. Also check if you got the correct radio.

I had this issue, i just mtty'd into it and did Task 2a, 28 and 29 (Not completely necessary) and flashed magldr/clk it worked fine after that, i failed it by flashing the official TMOUS HD2 rom from T-Mobile. It failed at the SPL for me.

Phone's finally here, when i try to flash the stock ROM, it stops at 8% (the phone vibrates 7 times :S ) Tried with both stock ROMs, and with USB and SD too. What should I do now?

Reedim said:
Phone's finally here, when i try to flash the stock ROM, it stops at 8% (the phone vibrates 7 times :S ) Tried with both stock ROMs, and with USB and SD too. What should I do now?
Click to expand...
Click to collapse
IMO you could have a faulty CPU(over-heating failure BGA related)...
You should try put it in a freezer for 15-20 minutes and then try to flash a stock ROM: if you manage that, your CPU is faulty, if not ...another hardware related thing is faulty.

Could a radio change solve this problem maybe? :/

I doubt it..