Database Users

32B Bricked with a 32 A RUU SOLVED!!! WORKS ALWAYS!!!! NO GOLDCARD OR ANYTHING NEEDED

Hey guys, for usually I don't do this and try to help myself on my own when I brick stuff but this time after trying and failing all possible methods for about 10 hours Iam finally here to ask you what I can do...
------ SOLVED!!!!!!!!!!!!! HALLELUJA GUYS I REVIVED MY MAGIC!!!!! ------------------
SOLUTION:
-> I used the Arabic RUU, which was only SLIGHTLY (But nonetheless somehow!) newer than the Asian RUU I had before!
I checked the size of the RUU and it was 60 MB, thus small enough to might have a suitable system.img!
Then I downloaded it, ran the RUU and checked the temporary files for the ROMs and there was only ROM.zip. I tried to just ran the RUU upgrade but it got stuck again (as always)
NOW I could use the rom.zip from my original RUU (Vodafone Germany, 32B!) and insert in in the Temp.File of the Arabic version, then just run the upgrade as usual.
SO TO ALL WHO GET STUCK WHILE UPDATING: Search for a RUU which contains the ROM in the same way (There are 3: rom.zip, rom.nbh and rom.zip/rom1.zip) and copy your original Files into it! The only thing you need is a newer RUU, then it will run despite the fact it wont install the System img!

But where were you stuck? At which screen?
I was flashing my friends HTC Magic 32A to put a new recovery, hboot and SPL.
When I was upgrading the SPL from 6.xx.08.xx to 6.xx.10.xx (i flashed an update.zip with AmonRA recovery) the flash went OK and then it said: "Reboot to complete upgrade"
So I rebooted, and this image appeared:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And now nothing else shows up. Not fastboot, not recovery, nothing. Just this damn icon.
I heard that the solution could be to put a new update.zip on the SDCard, and let the installation of new SPL continue...
Afterall, this update for SPL was an update(3mb), not a complete SPL (20mb)...... But i really don't know what new update.zip to use...

Tried to use a RUU.exe? from the HTC Page or here from the forums?

Ravensysteam said:
Tried to use a RUU.exe? from the HTC Page or here from the forums?
Click to expand...
Click to collapse
From htc.. But phone was not even detected

Well my solution obviously only does work if the phone got bricked by RUU and you get to the RUU screen. Have no clue about your problem tho, Guess you can only try some Update.zips and see what happens

Device not going on :(

Hi i got a HD2 but it wont start
I tryed difrent accu from a college and his device just start and mine not
Any help ?
Greatings
Marcel
EDIT: I got the device starting up in the color bars(bootloader) But i cant flash it

HD2 wont flash
Hi my previous post that the device wont turn on i closed that one.
I am at the tree color screen but when i want to flash a radio or os then it hangs at 0% also i cant hardspl the device.
I cant use the device at this moment

applied hspl?

must be purely coincidental, and something completely different, but my HD won't start up since this mornming either...
Question: Do you get an orange led while charging? If so, my connector is probably broken...

Any chance you could tell us what ROM you had previously and what you were trying to do. What are the details you see in BootLoader Mode?

Dont know
I dont know, I got the device from some one else hspl i cant install it or the application is crashing,
I applyd the offical rom from htc but it hangs at 9% and ad 7/99%
I realy get frustrated by this

Antonius123 said:
I dont know, I got the device from some one else hspl i cant install it or the application is crashing,
I applyd the offical rom from htc but it hangs at 9% and ad 7/99%
I realy get frustrated by this
Click to expand...
Click to collapse
So the chances are that the phone is without a ROM.
Now can you try and get into BootLoader Mode (with phone off, press and hold the Volume Down button then tap the Power button). Then tell us what it says.

I got in the bootloader:
PB81100 HX-BC
SPL-1.42.0000
MicroP(LED) 0x05
MicroP(Touch) 0x50
Upgrade Rom code error
Please try again
in the tob right corner: RUUNBH

ruunbh means it is in flash mode, 1.42.0000 means it is stock spl,
so
get hspl2,
put phone into bootloader,
connect phone to usb,
when 'serial' becomes 'usb' run hspl2,
when it reboots after 'we hacked it', hold vol down so tat you return to bootloader,
spl should now say 1.42.hspl
(or x.xx.hspl depends if you changed it in hspl2 dropdown, doesnt matter if you did or not, so long as it ends .hspl)
run your rom flash over usb. either stock rom.exe or customruu with cooked rom.

i did that and the hspl2 application hangs (i will post the error code in this )

Error code after running hspl2_RUN
critical error
Flow: 00000006
Error Code:00000000
Discription: Unkown

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dit is de error that i get

i guess your last chance is installing the rom via sd card.
do you know if it was branded?
you can check that by trying to download a rom with the S/N of your phone at htc.com.
the rom you can download, is the right one.
download it, unpack it, copy the .nbh on the sd card, rename it to leoimg.nbh and get your phone into bootloader.
DN41

trying it now,
got serial into htc and now downloading and deploying the file

isnt working
I dont know why but the device go into the color bars again and dont continiu i use a 4 gb sd card

does it start flashing? when does it stop (%)?
any infos shown?
DN41

First i get loading for like 5 minutes then it gos to the bootloader directly

could be the card, that happens on 8gb cards too, loading.... wait wait wait - bootloader.
2gb fat32 4096 (4k) block size for best results.

ok i am a little bit further
i download the hp format tool (i use them to create my own os disks etc)
I formatted the sd card with 4k fat32 and now it is updating so thubs crossd.

Hi update did complete,
It now hangs on the HTC Logo on boot :S (i think it is not my lucky day )
or is it taking first time very very long ?

Guide: Flashing WP 7 on your HD2

Okay, so I finally found the WP7 Rom and the new MAGLDR 112 that comes in the zip with it.
It's on DFTs forum.
I've uploaded the text file from DFT's forum which includes the download links for the ROM and MAGLDR 112(included in the ROM's zip file)
It's a pretty simple process if you've already flashed your own NAND Android ROM.
First I suggest you backup your SD card and your current NANDroid.
Then enter your bootloader (hold volume down and power button while device is off)
Connect to your computer and start the RomUpdateUtility provided in the MAGLDR112 folder.
Follow the prompts and update to MAGLDR 1.12
After that, your device should restart.
In MAGLDR 1.12 go to USB flasher and wait for the USB connection.
Then run the DWI (as Admin in Win7/Vista) and follow the prompts to install WP7.
After that the device will reboot and instead of booting into Android it will boot into WP7.
Simple
To activate Windows Live services follow this guide http://forum.xda-developers.com/showthread.php?t=912218
It's pretty straight forward.

hey hey!
i still have win6.5 stock rom installed.
do i need to do anything different like flash it to nand droid rom.
Sorry if the question is a stupid one.I am a real NOOB!
Thanks for guidlines!

elasticity19 said:
i still have win6.5 stock rom installed.
do i need to do anything different like flash it to nand droid rom.
Sorry if the question is a stupid one.I am a real NOOB!
Thanks for guidlines!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=893948
Follow this guide first, up until the point where it tells you to flash the Android ROM, instead flash the Windows Phone 7 ROM, and don't forget to install MAGLDR 1.12(from the WP7 Rom zip file and not the MAGLDR 1.11 from the link above)

THANKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

seriously out of topic question
will your android boot up from SD card if u're running WM7
in eg: copying all the Android folders into SD card, and booting clrad/haret?

My phone wont go into magloader after flashing it, i am simply stuck on the bootup screen.
Any ideas?

xandercom said:
My phone wont go into magloader after flashing it, i am simply stuck on the bootup screen.
Any ideas?
Click to expand...
Click to collapse
Same problem here

DanneG said:
Same problem here
Click to expand...
Click to collapse
Any ideas?
I have tried installing with both a 64bit and 32bit machine as another user suggested that might resolve it.
My next step is going to be reflashing of the NRG rom I installed, see if that will revert and then try again.

xandercom said:
Any ideas?
I have tried installing with both a 64bit and 32bit machine as another user suggested that might resolve it.
My next step is going to be reflashing of the NRG rom I installed, see if that will revert and then try again.
Click to expand...
Click to collapse
no idea, I have triead with a win 7 & win xp machine, same problem.
Everything runs without any problems, exept its stuck on the bootup screen

Do you have HSPL 2.08?
Sent from my HD2 using XDA App

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC Desire using Tapatalk

Solved it!
Download a new radio
I'm using Leo_RADIO_2.15.50.14 now
http://forum.xda-developers.com/showthread.php?t=611787

Hi, for me I have update to wp7 already but when I plug the USB to my PC the phone it don't show me anything...i can't syn I can't use it as USB drive..so what next that I next to do?

DanneG said:
Solved it!
Download a new radio
I'm using Leo_RADIO_2.15.50.14 now
http://forum.xda-developers.com/showthread.php?t=611787
Click to expand...
Click to collapse
Is it necessary to have that radio? I have the Tmous Leo and I have 2.10.50.26 (Im pretty sure) and I got through the installation process. I havent activated it yet, Im waiting on the downloads of the WPDK and all (slow internet). Everything seems to be working wonderfully except for 1 problem: if my screen is off for more than a minute or two, it wont turn back on and I have to yank the battery and restart my phone. Any way to fix that? So far, setting the screen to never turn off works fine, but that will kill my battery while not plugged in.

[Q] DFT SCREEN Hang WP7

Noob Here
Flashed Rom with Leo1024 Rom
Folowed the guides
On boot dft screen hangs
did i brick the phone?

carologist said:
Noob Here
Flashed Rom with Leo1024 Rom
Folowed the guides
On boot dft screen hangs
did i brick the phone?
Click to expand...
Click to collapse
No, probably a bad flash or incompatible SD card. Format your card with "SD card Formatter" by Panasonic then...
a) Reboot and when you see the 1234 on screen hold own Vol UP&DOWN together until it goes past DFT into white screen with instructions, then follow them to reset phone.
b) If that doesnt work try to re-flash via magldr/usb.
If the above fails try a different card.

carologist said:
Noob Here
Flashed Rom with Leo1024 Rom
Folowed the guides
On boot dft screen hangs
did i brick the phone?
Click to expand...
Click to collapse
If the phone starts to loop at the dft screen press and hold volume down and it should stop looping. Any other button may also work. But maybe should do a reflash...

same here, having trouble and constant reboot, I tried to reflash (hold off button, select USB flasher), same thing, but after few attempt of self reboot, I manage to get in, after restart the phone, I get DFT screen constantly self reboot again, but after a few attempt it boot in.
Before that I had freezing problem with stock rom, I was told to use WP7 or android to fix the freezing problem. I seems like I doesn't fix anything at all....

thesame problem i have
its cust staying dft screen what can i do
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Are you using hspl2.08 and a compatible radio?

its cust staying dft screen what can i do
hspl2.08
Radio Leo 2.15.50.14

gogodu5sU said:
Are you using hspl2.08 and a compatible radio?
Click to expand...
Click to collapse
yes i do i am using 2.08 hspl .and i also tried all radios...

Remove your sd and sim card or re-download magldr and leo70 rom, make a task29 and reflash magldr and wp7.
Otherwise idk what it could be.

Just got an HD2 that I am trying to load with wp7. The phone is going to elsalvador with my mom to use down their while on vacation and will stay there but I get stuck on the DFT screen bootlooping as well. When I hold volume down while it does this I get a bootloader similar to the three color that says
leo100 SS-B3
nspl0.96.2250.0 and the LED and TOuch
It also says SD none
partition info v211v413.
Can anyone help me. I have reflashed all using hspl 2.08 and Radio Leo 2.15.50.14?

[Q] [Help] I've brick my HD2

after i try to flash my phone to android ROM via SD card, i think i've brick my HD2
i think i can go to the bootloader( the screen with blue,red,n green colour)
n i can connect to USB (as i see at the bootloader screen with the USB word at the bottom when i connect to my laptop)
after i switch on my phone, it appear this words
"The device is unable to boot because either you have turned off the device incorrectly or......." (as the picture i link)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so, is there anyway to solve this problem?

Press Volume Up to hard reset?

tried dy
also i try to use sspl to flash, but it stuck at 0%

some more info please:
1) how did you try to flash an Android ROM via sd card? Do you have magldr flashed?
2) Do you have HSPL flashed on the device?
Flashing an Android ROM from SD isn't possible from anything but magldr or CWM, so which one did you use?

orangekid said:
some more info please:
1) how did you try to flash an Android ROM via sd card? Do you have magldr flashed?
2) Do you have HSPL flashed on the device?
Flashing an Android ROM from SD isn't possible from anything but magldr or CWM, so which one did you use?
Click to expand...
Click to collapse
1. via SD Card, i click on CLRCAD inside the Android folder
2. my bootloader now showing SPL3.03

kelvinklose said:
1. via SD Card, i click on CLRCAD inside the Android folder
2. my bootloader now showing SPL3.03
Click to expand...
Click to collapse
Android does not work well with that SPL version.
Download HSPL4
tell it to flash SPL 2.08
Try launching clcrd and haret again.

i found this guys,http://forum.xda-developers.com/showthread.php?t=668347
now, stuck at step 14, which i cant enter any words in the M-TTY windows

orangekid said:
Android does not work well with that SPL version.
Download HSPL4
tell it to flash SPL 2.08
Try launching clcrd and haret again.
Click to expand...
Click to collapse
i dont have HSPL 4.
only get to update it to HSPL3.03

after update to HSPL3
my phone still hang at the HTC logo page,
after a while, it still show
"the device is unable to boot because either you have turned off........."
(same as the above pic)

i use SSPL to flash it to other ROM, hope it works
50% now

oh,, FINALLLY, i manage to flash back to my original ROM
thanks all the helping guys

kelvinklose said:
oh,, FINALLLY, i manage to flash back to my original ROM
thanks all the helping guys
Click to expand...
Click to collapse
lol, np.
for future reference:
http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
This is HSPL 4, it allows you to flash to different HSPL/SPL versions:
For flashing Android/WP7 or running Android I'd suggest using that to flash to HSPL 2.08

orangekid said:
lol, np.
for future reference:
http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
This is HSPL 4, it allows you to flash to different HSPL/SPL versions:
For flashing Android/WP7 or running Android I'd suggest using that to flash to HSPL 2.08
Click to expand...
Click to collapse
but i dont see HSPL 4 in the option
i only see
2.08
HSPL 2.08
3.03
HSPL 3.03

kelvinklose said:
but i dont see HSPL 4 in the option
i only see
2.08
HSPL 2.08
3.03
HSPL 3.03
Click to expand...
Click to collapse
What Orangekid means it is the fourth released HSPL which is called HSPL 4. You just have to coose which HSPL or SPL version you want to use. If you if you are wanting to put SPL back onto your HD2 then just make sure you flash a version with .0000 at the end.