i tried instaling windows phone 7 hd2
i instaled the magldr112 ,then the mobile restart when it open it show the htc sign and nothing happend ,i tried hard reset not working
plz i need help i dont know what to do
Related
hello sir,
i 've this pda it is stoped on boot screen i try to hard reset the its not working i tried to connect it with pc while the phone is on boot
mode it installed its driver but not communicating with activesync
i 've already downloaded the offical rom the fone but ?
plz help me to sort out the problem
thx in advance
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
I think I've got same problem..
It can't run again after splash screen..
well my phone after i flashed and installed wm 6.5 it was working totally fine, but this morning i turned it off and then on and it totally freezes at the startup screen and never loads windows. what i can do?
i'll appreciate any comments
i have then same problem switches on displays, disigned for windows mobile 6.5.5 then freezes
Yeah many ppl has this issue... be sure to flash first the att stripped att stock rom then hard reset then boots then reflash the custom rom then hardreset then try again to use th rom maybe it works ok now
I have the same problem
but I have the same problem. I bought a second hand phone and also freezes on the welcome screen and to make the rom? I need it so I can re-flash the windows
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
miljan017 said:
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
Click to expand...
Click to collapse
try to upgrade radio version on your device !! you can find Radio Rom Wizard in http://forum.xda-developers.com/showthread.php?t=300713 or at http://forum.xda-developers.com/showthread.php?t=268031
i cant start update proces always error 260 or 262
Jasjam Freez on i-mate logo
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Batman1351 said:
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Click to expand...
Click to collapse
probably you need reflash again your device with Original Shipped ROM
JasJam Freez on Logo
Dear Rahman
sorry for my bad english.Thank u for ur reply.jasjam freez on the first page!it mean i can not connect it to PC via active sync because it no load to windows!PC can not detect device!so how can i fix this problem without a PC connection ?
My phone was working well. Then i installed the new rom from mdj, CM7.
At first it was working good, but then i plugged my phone to pc but it wasnt recognized anymore. So i wanted to change back to another rom. No matter what i did my pc and my netbook didnt recognize my phone anymore. then i tried to update the rom with CW and a fixed rom from CM7. Since then my phone tells me theres nothing to boot in nand. And pc still not recognizing my phone. Pls help me guys. im trying to fix this since 3 hours but nothing works...pls help me.
power off your phone (pull battery and put it back in)
hold volume down and power button until you get to the tri colored screen
plug the usb into the computer
flash over any RUU
i tried that allready but as i said pc dont recognize as usb...so at the screen it says serial and not usb...but still i tried to install it and it didnt work
When i boot the phone it says...nand kernel open failed...is there a way to install a nand rom completely over CW?
Then is sounds like your pc has the prob not the phone.
Reboot PC and also try re-instaling Mobile Device Center or ActiveSync depending on what version of windows you have.
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
have you tried reflashing winmo using sd card? then start all over again.
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
Trying flashing your official WM Rom through SDcard. Once you are back in WM, you can flash your desire NAND Rom.
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
H-KaN said:
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
Click to expand...
Click to collapse
Hope everything goes well for you......Good Luck
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
H-KaN said:
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
Click to expand...
Click to collapse
better fully uninstall mobile device center using softs like your uninstaller and alike to totally clean the installation then plug in usb. Then let Windows 7 do its job in installing the driver.
i cant believe it :S for real i cant believe it...i just changed the usb cable and tried with it :S and it worked :S the driver got installed and now its working :S now thats curious...not working with original cable anymore but with a cable from the nokia n97 :S
hi every body
i hope some body can help me
my friend brings me a htc hd mini that when i turn it on on the phone restart on page that show (starting windows for the first time)
i did hard reset by volume up and down and went fine but no luck
i try to onstall rom by sspl and got wendor id error
so i search according to its serial nuber and found its region and downloded its RUU that was 1.36.707 ( malasiya)
and installation went fine but again restart problem on no luck
also extract ruu and renam rom to PHOTOIMG and put on memory and installation wia download mode and went fine but same problem and phone restart
SO is it hard ware problem or there is any trik that can help to solve thist via software??
the situation of phone is restarting ( i dont know what happended for it before)