My phone was working well. Then i installed the new rom from mdj, CM7.
At first it was working good, but then i plugged my phone to pc but it wasnt recognized anymore. So i wanted to change back to another rom. No matter what i did my pc and my netbook didnt recognize my phone anymore. then i tried to update the rom with CW and a fixed rom from CM7. Since then my phone tells me theres nothing to boot in nand. And pc still not recognizing my phone. Pls help me guys. im trying to fix this since 3 hours but nothing works...pls help me.
power off your phone (pull battery and put it back in)
hold volume down and power button until you get to the tri colored screen
plug the usb into the computer
flash over any RUU
i tried that allready but as i said pc dont recognize as usb...so at the screen it says serial and not usb...but still i tried to install it and it didnt work
When i boot the phone it says...nand kernel open failed...is there a way to install a nand rom completely over CW?
Then is sounds like your pc has the prob not the phone.
Reboot PC and also try re-instaling Mobile Device Center or ActiveSync depending on what version of windows you have.
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
have you tried reflashing winmo using sd card? then start all over again.
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
Trying flashing your official WM Rom through SDcard. Once you are back in WM, you can flash your desire NAND Rom.
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
H-KaN said:
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
Click to expand...
Click to collapse
Hope everything goes well for you......Good Luck
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
H-KaN said:
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
Click to expand...
Click to collapse
better fully uninstall mobile device center using softs like your uninstaller and alike to totally clean the installation then plug in usb. Then let Windows 7 do its job in installing the driver.
i cant believe it :S for real i cant believe it...i just changed the usb cable and tried with it :S and it worked :S the driver got installed and now its working :S now thats curious...not working with original cable anymore but with a cable from the nokia n97 :S
Related
Hello all,
I'm not sure but i think my blackstone is on its last legs.
It all started after i flashed to Dutty's last rom the r15 one. Did the usual uspl and eveything went to plan. Then about a week ago the phone frooze, i could'nt get it to reset so had to take the battery out (no biggy). Then tried turning it back on, and it just frooze again right at the windows start-up screen. So did a hard reset and the phone seemed very slow and jumpy.
Then i thought maybe the download of dutty's rom wasn't the best. So today i had planned to install a different rom and see if it was just a bad download or sumthing. And heres the big problem, i can't get the bootloader to connect to my pc.
And what seems strange is that when i enter the bootloader it flashes up with the re/green/blue/white screen andt ehn it shows a grey screen with "loading......." for about 10 seconds then comes back the normal bootloading screen. As usual serial pops up at the bottom, but when connected to my pc it won't show USB!!
I have win7 64, but i have set it up so i can flash using USPL as thats how i got dutty's R15 rom on there.
Any help would be great and hopfully i can get this sorted swn as i love my hd.
p.s
i've spent the past 2 hours searching here and havent found anyone with the same problem.
Thanks
Antony
if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.
i am now installing the stock rom.
hopefully then i wil be able to install a cooked rom again.
berbecverde said:
if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.
Click to expand...
Click to collapse
Thanks for the help,
I will see what the outcome is from the stock rom. And if i can't get it working again with win7 then i'll have to set up my mini pc (made a pc inside an old nintendo SNES) as thats got xp running
thanks once again
just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?
berbecverde said:
just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?
Click to expand...
Click to collapse
Well after more hours spent reading thro web page after web page, i stumbled over someone saying that it could be down to the usb cable and i have a few mini usb one, so tried them all, finally got the bootloader to show the usb.
I was then going to install a cooked rom, but thought i'd be the best to go for stock first.
All is working ok now. I'm not sure if it was down to the usb cable totally tho as it was a bit strange the whole grey loading screen on the bootloader which has gone now with the stock rom.
ah well looks like its fixed for now.
Hi everyone i was wondering if anyone could help me... i have several questions about my htc touch elf see i just upgraded it to the onyx 4.something version and after 4 days the wifi stoped working it wont turn on and it wont detect my sd card either... i was wondering if anyone could help me on how to degrade it to a better ROM or anything cause when i try to degrade the onyx 4.something to 3.0 it says it cant establish a conection between the phone and the computer when i run the romupgradeutlity and when i hit the upgradeimage buttom... ... please help me.. thanks a lot!
post in Onyx ROM thread and read the stickies.
Your Elf Device, Our Vogue Device
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265
rasv19 said:
Hello I was wondering if anyone could help me... i have an htc touch elf and i upgraded it to the Onyx 4.0 after 4 days of use it started giving me some trouble sometimes i hitted the touch screen and it opened something else , my wifi stoped working it wont turn on and it wont detect my micro SD... i tried downgrading to Onyx 3.0 through ROMupdateutility but when it was at 0% it said it coudlnt detect the mobile device... i was wondering if anyone could help me fix this problem cause i want my phones wifi to work and micro sd too. thanks a lot.
Click to expand...
Click to collapse
please try a hard reset, that should help solve the problems.
i doubt if this is anything to do with ROM you flashed (since you have flashed successfully, as your phone does boot.
if none of this works please post.
a hard reset should help you though.
rasv19 said:
nope it didnt worked my phones wifi still not working and its not detecting my sd card.... like wheneve ri turn blutooth on the wifi green light turns on with it but the wifi wont turn on itself and then when i go to the music thing on my phone it detects the first song i have but when i play it says theres no files and the sd card wont show up on the file explorer.... and other thing when i try upgrading or downgrading my phone by romupgrade utility i get the error 222 canot eswtablish conections between your pda and computer check usb cable.... so i dont know cause the first time i upgraded it from the manufacture ROM to the onyx 4.somethhing it went pretty great..
Click to expand...
Click to collapse
i see, error222.
please make sure that your USB cable is working.
pleasemake sure your computer has active sync 4.5 installed ( if windows XP)
or the latest WMDC (if vista or win7 )
also regarding the memory card, are u sure the card is fine ?
please put it another device/card reader and check, try formatting it and see if ur elf detects it.
ROMs usually don't have anything to do with memory drivers.
what HSPL/USPL did u flash ?
Prowess said:
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265
Click to expand...
Click to collapse
You posted in the Vogue section. I have transferred your thread to the Elf section.
yeah it works on other devices.... the usb cable is working really fine and i dont know what uspl i flashed .. . like i mean everything went rite until 4 days after i instaled the onyx 4.0 ultimate everything was working fine with it but 4 days later it started to give me that problem ... and i try to change ROM but i cant it wont let me i run active sync andeveyrthing it says its conected i run the romupdateutiliy then the status bar opens up but it stays at 0% and then the error 222 shows up... but my phone goes to the bootloader but it wont pass from there.. and when i close the romupdateutility my phone switches to the status bar but stays in 0% and then my phone crashes and i have to unbrick it.
first of all please do not open 3 different threads for the same problem, i have removed the other two.
also as aman said try posting in the the rom thread.
please read thee thread which have been stickied on the ROM development thread.
please be patient
thanks for your co-orperation.
hi all i ran this program as per the guide and got to the whare it says load rom and since then it has stuck on the loder screen sayin stick together the frist part went ok when it says do u see weve hack'd it can any one help , have i brick'd the phone
samuel79 said:
hi all i ran this program as per the guide and got to the whare it says load rom and since then it has stuck on the loder screen sayin stick together the frist part went ok when it says do u see weve hack'd it can any one help , have i brick'd the phone
Click to expand...
Click to collapse
task29 erases EVERYTHING from your internal storage.
To flash a ROM now turn off the phone (battery pull).
hold the volume down key and press power.
You will now be at a tri-color screen.
now flash any WinMo rom from RUU or flash magldr for Android/WP7.
i have dwonload the omega file but it wont start up but in my frends pc it runs but cant find the phone
samuel79 said:
i have dwonload the omega file but it wont start up but in my frends pc it runs but cant find the phone
Click to expand...
Click to collapse
when you plug your phone into your PC and you're in bootloader does it say "USB" on the phone?
edit: you on a tmobile USA phone or international one?
uk t mobile unlockd when i try'd it in my frends pc it says it dectects the procsser but wont install hardwaare but it dont have activesync on it /running xp
samuel79 said:
uk t mobile unlockd when i try'd it in my frends pc it says it dectects the procsser but wont install hardwaare but it dont have activesync on it /running xp
Click to expand...
Click to collapse
You don't need activesync on it since you are running from the bootloader. The only reason you would use activesync is to get it into bootloader mode.
does it say USB on your phone in bootloader when you connect it?
task29 erases everything except the HSPL...
so...after task29...
flash your stock ROM and done!
OR
if you want to use a custom ROM that INCLUDES a radio, then flash the ROM and done!
OR
if you want to use a custom ROM that DOES NOT INCLUDE a radio, then flash the chef recommended radio and ROM and done!
i have a feeling this "omega" ROM you speak about might not include a radio. this would be mentioned in the thread of the omega ROM...read and proceed accordingly.
I had the same problem. Turns out it won't work on my Lappy that is running XP but when I tried again using my wifes Lappy with Windows 7 it went straight on. I was at it for two days trying to get it to work. Took only a few minutes once I swapped Lappy's!!.
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
install windows mobile device center to your pc.otherwise it doesn't recognize it.
I have installed WMDC. But it doesn't recognize it at all.
but cwm isnt flashed from bootloader? r u using magldr or clk?
MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing
try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)
after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see
[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks
Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable
After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?
Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App
Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.
My phone got a little liquid on it and after that it frozen so I did a soft reset and now my phone is freezing on android boot screen every time. The problem is what my MAGLDR is not working properly now too and my ClockworkMod Recovery is not working at all, so I don't know how to reinstall soft now. The MAGLDR is kind of flashing always and its hard to control as sometime its not reacting to my button push. And then I try to go into ClockworkMod Recovery its just starts loading, does that 1234 go and it freezes on it, every time. But besides all this stuff my phone looks like working fine, just looks like it just has some software damage. I think it should work with a new soft if not at least I can send it to my insurance as I will change a soft back to normal, because now my insurance will not fix my phone as it freezes on android boot screen so whey will see that I have android and not windows. Waiting for any good advice. Thank you
Btw. My original boot loader is not working too, I can't get in to it. I think its because of the android.
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
A.J said:
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
Click to expand...
Click to collapse
That's what I waned to do, but last time when I tried to connect it my computer couldn't find my phone. That's why I'm asked for a help here. I will try to connect it later today, after I come back from my work and I will post it here, if its connects or not
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Sw1pe said:
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Click to expand...
Click to collapse
'USB mass storage is working fine'
You may be able to flash a stock ROM from the SD card but I think it involves the bootloader. Have a look at This thread and see if it helps (I CBA to read it properly, sorry )
Thanks, but yes it involves the bootloader
Does Bootloader normally work if MAGLDR & ClockworkMod Recovery is installed on device?
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
A.J said:
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
Click to expand...
Click to collapse
Yeah that's a good point. If you can, trying PCs with different versions of Windows could help (i.e. XP, Vista, Windows 7 etc.)
Ok so I managed to connect my phone via USB Flasher on my work computer and I installed "[30.DEC.10][DFT]LEO "Stock Desire" NAND Android ROM" without any problems but my phone still stucks on DFT Boot screen. I also tried to reinstall MAGLDR and ClockworkMod Recovery to get Clockwork Recovery work but it didn't work, it didn't change anything. Does any one have any ideas what can I do next? Is it possible to install wm 6.5 via USB Flasher? As I know it needs bootloader Does any one have more ideas how to fix it?
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
A.J said:
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
Click to expand...
Click to collapse
I can't! Because wm 6.5 requires connection between bootloader or active sinc, there is not other way when instaling wm 6.5, and none of them work now on my device
take a look here, we have the same issue too... http://forum.xda-developers.com/showthread.php?t=899628&page=7