TASK 29 - HD2 General

hi all i ran this program as per the guide and got to the whare it says load rom and since then it has stuck on the loder screen sayin stick together the frist part went ok when it says do u see weve hack'd it can any one help , have i brick'd the phone

samuel79 said:
hi all i ran this program as per the guide and got to the whare it says load rom and since then it has stuck on the loder screen sayin stick together the frist part went ok when it says do u see weve hack'd it can any one help , have i brick'd the phone
Click to expand...
Click to collapse
task29 erases EVERYTHING from your internal storage.
To flash a ROM now turn off the phone (battery pull).
hold the volume down key and press power.
You will now be at a tri-color screen.
now flash any WinMo rom from RUU or flash magldr for Android/WP7.

i have dwonload the omega file but it wont start up but in my frends pc it runs but cant find the phone

samuel79 said:
i have dwonload the omega file but it wont start up but in my frends pc it runs but cant find the phone
Click to expand...
Click to collapse
when you plug your phone into your PC and you're in bootloader does it say "USB" on the phone?
edit: you on a tmobile USA phone or international one?

uk t mobile unlockd when i try'd it in my frends pc it says it dectects the procsser but wont install hardwaare but it dont have activesync on it /running xp

samuel79 said:
uk t mobile unlockd when i try'd it in my frends pc it says it dectects the procsser but wont install hardwaare but it dont have activesync on it /running xp
Click to expand...
Click to collapse
You don't need activesync on it since you are running from the bootloader. The only reason you would use activesync is to get it into bootloader mode.
does it say USB on your phone in bootloader when you connect it?

task29 erases everything except the HSPL...
so...after task29...
flash your stock ROM and done!
OR
if you want to use a custom ROM that INCLUDES a radio, then flash the ROM and done!
OR
if you want to use a custom ROM that DOES NOT INCLUDE a radio, then flash the chef recommended radio and ROM and done!
i have a feeling this "omega" ROM you speak about might not include a radio. this would be mentioned in the thread of the omega ROM...read and proceed accordingly.

I had the same problem. Turns out it won't work on my Lappy that is running XP but when I tried again using my wifes Lappy with Windows 7 it went straight on. I was at it for two days trying to get it to work. Took only a few minutes once I swapped Lappy's!!.

Related

trouble with hard spl

Im unable to upgrade the rom on my stock htc polaris.
im using vista with the 4.0 driver installed (dl'd from this forum).
I've turned off usb connection in win device center however when i try and install hard spl2 the progress screen sits at 0% and then times out with a 262 error.
does anyone have any ideas that can help me?
Use XP. I bet it works OK then...
4.0 Driver installed?
I have a stock Vista Ultimate, stock Device Center 6.1 and a German Orbit 2. It took me a while, but I finally managed it.
I didnt turn anything off, nothing. The only thing I had to change since the O2 ROM doesnt run unsigned stuff: the reg-entry to allow unsigned apps. Thats all.
Remove SD-Card
Connect to Device Center, wait till connection is fully established
Start the supplied RUU from HardSPL package
Follow instructions/click next/next/next...
Check your device, you have to confirm the execution of the loader
When the tri-color screen appears, unplug and replug, it'll upgrade the SPL and takes approx. 2 seconds
If you have no success at all: try to leave the device at the tri-color screen, quit the RUU and run it again, just leaving the device at the tri-color screen.
After a couple tries, I managed it and I'm happily running a stock HTC ROM instead of the O2 one.
Good luck, report back if it worked.
bencassie said:
Im unable to upgrade the rom on my stock htc polaris.
im using vista with the 4.0 driver installed (dl'd from this forum).
I've turned off usb connection in win device center however when i try and install hard spl2 the progress screen sits at 0% and then times out with a 262 error.
does anyone have any ideas that can help me?
Click to expand...
Click to collapse
u must be in normal status i mean just whe u r synching with vista and the ppc should be on and then start the hard spl (u don't need to go in bootloader by yourself) it will go to bootloader automatically and then upgrade will be successfull.
so
connect ppc with wmdc vista and then when connected and start hardspl
tried all of this but still no joy.
i think running it on xp would be fine but i dont have an xp box
bencassie said:
tried all of this but still no joy.
i think running it on xp would be fine but i dont have an xp box
Click to expand...
Click to collapse
failing that, go get an (micro)SD card and format it as FAT32
bung the RUU_Signed.nbh inside the rom update onto the SD card and name it POLAIMG.nbh (or to make it flash with no user confirmation, POLADIAG.nbh) slap the SD into your device and reset into SPL
Thanks A Million!!!!
Olipro said:
failing that, go get an (micro)SD card and format it as FAT32
bung the RUU_Signed.nbh inside the rom update onto the SD card and name it POLAIMG.nbh (or to make it flash with no user confirmation, POLADIAG.nbh) slap the SD into your device and reset into SPL
Click to expand...
Click to collapse
Olipro, You saved my life. After trying to flash my own cooked rom, my cruise wouldn't go beyond the splash screen. I used your tip and it worked!!!
THHHHAAAAAANKK YOUU!!!
Carlos

Phone Not Working Anymore! PLS Help!

My phone was working well. Then i installed the new rom from mdj, CM7.
At first it was working good, but then i plugged my phone to pc but it wasnt recognized anymore. So i wanted to change back to another rom. No matter what i did my pc and my netbook didnt recognize my phone anymore. then i tried to update the rom with CW and a fixed rom from CM7. Since then my phone tells me theres nothing to boot in nand. And pc still not recognizing my phone. Pls help me guys. im trying to fix this since 3 hours but nothing works...pls help me.
power off your phone (pull battery and put it back in)
hold volume down and power button until you get to the tri colored screen
plug the usb into the computer
flash over any RUU
i tried that allready but as i said pc dont recognize as usb...so at the screen it says serial and not usb...but still i tried to install it and it didnt work
When i boot the phone it says...nand kernel open failed...is there a way to install a nand rom completely over CW?
Then is sounds like your pc has the prob not the phone.
Reboot PC and also try re-instaling Mobile Device Center or ActiveSync depending on what version of windows you have.
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
have you tried reflashing winmo using sd card? then start all over again.
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
Trying flashing your official WM Rom through SDcard. Once you are back in WM, you can flash your desire NAND Rom.
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
H-KaN said:
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
Click to expand...
Click to collapse
Hope everything goes well for you......Good Luck
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
H-KaN said:
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
Click to expand...
Click to collapse
better fully uninstall mobile device center using softs like your uninstaller and alike to totally clean the installation then plug in usb. Then let Windows 7 do its job in installing the driver.
i cant believe it :S for real i cant believe it...i just changed the usb cable and tried with it :S and it worked :S the driver got installed and now its working :S now thats curious...not working with original cable anymore but with a cable from the nokia n97 :S

[Q] Flash back from WP7 to WinMo 6.5.*

Hi there. I flashed my hd2 (T-MOBILE) to WP7.
Now i need flash back to winmo 6.5.*
i try looking for some thread at forum but no luck (new forum look )
can someone tell me (link) how to flash back to 6.5.* and what ROM is the best for my radio version
T-MOBILE US
T-Mobile LEORadio_2_10_50_08_2
GeneralWoo said:
Hi there. I flashed my hd2 (T-MOBILE) to WP7.
Now i need flash back to winmo 6.5.*
i try looking for some thread at forum but no luck (new forum look )
can someone tell me (link) how to flash back to 6.5.* and what ROM is the best for my radio version
T-MOBILE US
T-Mobile LEORadio_2_10_50_08_2
Click to expand...
Click to collapse
I have the same problem, I have radio 2.10.50.26 but Im having some issues with WP7 restarting itself and no data connection, so I want to flash the 2.15 radio. I think I need be running WinMo to do this, but I have no idea how to flash back to a winmo rom from WP7. Help?
Simple,
Get to the tri color boot screen (vol down + power button)
Flash your win 6.5 ROM.
Hi, I am also trying to flash back to 6.5 from WM7. Could someone please give me some more details about how to flash back? I have the 6.5 rom on my PC and can get to the boot screen no problem but if I then try and install the old rom it fails as the PC doesn't detect the phone as being connected. Any help would be much appreciated, as although I love WM7 on my HD2 when it is working, it has a habit of randomly rebooting a lot! Thanks!
Hewarmsjeans said:
Hi, I am also trying to flash back to 6.5 from WM7. Could someone please give me some more details about how to flash back? I have the 6.5 rom on my PC and can get to the boot screen no problem but if I then try and install the old rom it fails as the PC doesn't detect the phone as being connected. Any help would be much appreciated, as although I love WM7 on my HD2 when it is working, it has a habit of randomly rebooting a lot! Thanks!
Click to expand...
Click to collapse
Just keep your phone unplugged and put it in bootloader mode. After a few seconds, the bottom part of the screen should say serial. Once it says that, plug it into your computer. Serial should change to USB in a second. If your computer doesnt have a driver for it yet, it should install that. Once its done, and once your phone says USB on the bottom of the bootloader screen, you should just be able to run the rom installer on your computer and install it. Good luck!
Thanks for you help, I managed that fine, though I had also wanted to remove the Hardspl I had used to add WM7. I have tried flashing the stock ROM back (via SD card and via USB) to overwrite it, however it fails to install correctly and the phone is being very unstable. Any suggestions!?
According to the thread I used to flash HSPL to my phone, you just make sure youre running a stock rom, then run the HSPL program like you did when you first put on HSPL, but choose 2.08.0000 in the selection screen.
That said, I havent removed HSPL so Im not entirely sure what to do if that doesnt work. If thats what you tried, Im not sure what to tell you
Have tried fiddling again and think I have done it! In the boot screen it now says SPL-2.08 (hopefully this is stock!?) and the phone seems to be behaving! Cheers for your assisstance
Yup, thats stock. No problem
peace warhead said:
I have the same problem, I have radio 2.10.50.26 but Im having some issues with WP7 restarting itself and no data connection, so I want to flash the 2.15 radio. I think I need be running WinMo to do this, but I have no idea how to flash back to a winmo rom from WP7. Help?
Click to expand...
Click to collapse
You can changes Radio Roms as you wish under any OS. Just hold the Vol Down key when switching on to enter bootloader and flash via USB from there.
SMS92 said:
You can changes Radio Roms as you wish under any OS. Just hold the Vol Down key when switching on to enter bootloader and flash via USB from there.
Click to expand...
Click to collapse
Yeah, I figured that out after I flashed back to WinMo -_____- haha
Now I just need to figure out how to make Chevron communicate with my phone so I can activate WP7
peace warhead said:
Yeah, I figured that out after I flashed back to WinMo -_____- haha
Now I just need to figure out how to make Chevron communicate with my phone so I can activate WP7
Click to expand...
Click to collapse
i suggest u use windows 7 (PC) and connect to internet when you are plugging phone to pc ,so it will download the usb driver and all of your problems will disapear
imanh said:
i suggest u use windows 7 (PC) and connect to internet when you are plugging phone to pc ,so it will download the usb driver and all of your problems will disapear
Click to expand...
Click to collapse
Hmmm I actually havent tried that yet, Ive done pretty much everything aside from reinstalling windows and stuff. I shut off my wireless during the process though because I turned off my antivirus and firewall. Hopefully that will work. WP7 is nice even without being activated, but it certainly doesnt come with many apps.

[Q] Reverting back to windows 6.5

Hi
I currently have w7 on my htc hd2 and im trying to revert back to win 6.5.
ive downloaded this stock rom RUU_Leo_TMO_UK_1.43.110.2_Radio_Signed_15.26.50.07U_.
Phone booted into USB Flasher (Hold Power down, Option 5, End call Button.
But it sits at Wait Usb....USB and doesnt move.
What am i doing wrong??
Please help?
Thanks
You need to enter bootloader. Shutdown phone and power on while holding volume down. It will be the tri color screen. Attach USB then run 6.5 rom update
Sent from my HD2 using XDA Windows Phone 7 App
Another option would be to flash the ROM via SD card method.
This way, everything will be set back to factory status.
tictac0566 said:
Another option would be to flash the ROM via SD card method.
This way, everything will be set back to factory status.
Click to expand...
Click to collapse
indeed, you should always use SD method when going back to stock, it will correct most issues and will bring your phone back to how it was when you got it, remember to install HSPL again if you intend to tinker with it some more, SD flash will remove Magldr and HSPL and will also change the radio, spl and ROM
search the forums for how to SD flash, theres plenty of them, infact most of them would have came up in the "suggestions of previously started threads" box when you make this thread!
flashing via bootloader is more reliable, sometimes flashing via sd image is not recognised.
timmymarsh said:
flashing via bootloader is more reliable, sometimes flashing via sd image is not recognised.
Click to expand...
Click to collapse
More reliable but less effective
dazza9075 said:
More reliable but less effective
Click to expand...
Click to collapse
lol, says you
ive had issues previously releasing the keys at a certain time to get the "image" to be recognised, but it does work.
Call me old fashioned, but ive been flashing via bootloarder for many years, sometimes old habits are hard to beat lol
Anyway, both work, take your choice
Hi to all,
I am a noob , i tried to install Android on my HTC HD2 TMO(US) , but after all the Installation i was getting an Error 1E Fatal Error , i am trying to atleast revert back to Windows 6.5, so i downloaded the Official ROM Upgrade from the WebSite the name is T-Mobile_HD2_MR_Software_2.13.531.1.exe and it installed properly without any errors, but all i can see is White Screen Now, does this Installation include OS also or should i install windows 6.5 seperately, please help me
thank you

Help me please to fix my phone

My phone got a little liquid on it and after that it frozen so I did a soft reset and now my phone is freezing on android boot screen every time. The problem is what my MAGLDR is not working properly now too and my ClockworkMod Recovery is not working at all, so I don't know how to reinstall soft now. The MAGLDR is kind of flashing always and its hard to control as sometime its not reacting to my button push. And then I try to go into ClockworkMod Recovery its just starts loading, does that 1234 go and it freezes on it, every time. But besides all this stuff my phone looks like working fine, just looks like it just has some software damage. I think it should work with a new soft if not at least I can send it to my insurance as I will change a soft back to normal, because now my insurance will not fix my phone as it freezes on android boot screen so whey will see that I have android and not windows. Waiting for any good advice. Thank you
Btw. My original boot loader is not working too, I can't get in to it. I think its because of the android.
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
A.J said:
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
Click to expand...
Click to collapse
That's what I waned to do, but last time when I tried to connect it my computer couldn't find my phone. That's why I'm asked for a help here. I will try to connect it later today, after I come back from my work and I will post it here, if its connects or not
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Sw1pe said:
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Click to expand...
Click to collapse
'USB mass storage is working fine'
You may be able to flash a stock ROM from the SD card but I think it involves the bootloader. Have a look at This thread and see if it helps (I CBA to read it properly, sorry )
Thanks, but yes it involves the bootloader
Does Bootloader normally work if MAGLDR & ClockworkMod Recovery is installed on device?
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
A.J said:
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
Click to expand...
Click to collapse
Yeah that's a good point. If you can, trying PCs with different versions of Windows could help (i.e. XP, Vista, Windows 7 etc.)
Ok so I managed to connect my phone via USB Flasher on my work computer and I installed "[30.DEC.10][DFT]LEO "Stock Desire" NAND Android ROM" without any problems but my phone still stucks on DFT Boot screen. I also tried to reinstall MAGLDR and ClockworkMod Recovery to get Clockwork Recovery work but it didn't work, it didn't change anything. Does any one have any ideas what can I do next? Is it possible to install wm 6.5 via USB Flasher? As I know it needs bootloader Does any one have more ideas how to fix it?
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
A.J said:
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
Click to expand...
Click to collapse
I can't! Because wm 6.5 requires connection between bootloader or active sinc, there is not other way when instaling wm 6.5, and none of them work now on my device
take a look here, we have the same issue too... http://forum.xda-developers.com/showthread.php?t=899628&page=7

Categories

Resources