HTC HD MINI restart problem - HD Mini General

hi every body
i hope some body can help me
my friend brings me a htc hd mini that when i turn it on on the phone restart on page that show (starting windows for the first time)
i did hard reset by volume up and down and went fine but no luck
i try to onstall rom by sspl and got wendor id error
so i search according to its serial nuber and found its region and downloded its RUU that was 1.36.707 ( malasiya)
and installation went fine but again restart problem on no luck
also extract ruu and renam rom to PHOTOIMG and put on memory and installation wia download mode and went fine but same problem and phone restart
SO is it hard ware problem or there is any trik that can help to solve thist via software??
the situation of phone is restarting ( i dont know what happended for it before)

Related

Is It Bricked???

I Have an orange branded touch dual, its unmodified in any way, i installed the spb mobile shell version 2.1 to the fone memory, i was playin arround with the tabs on the home screen trying to put my orange options in one of the tabs, i was given a warning that it wasnt compatible wiv this software but i acciently selected ok!!
now when i boot my fone up it boots to the home screen n then freezes the screen or the buttons wont work so im unable to navigate to the hard reset option, i tried to connect to active synk to flash a new rom but it connect 4 a second then disconnects
does anyone have any ideas how i can solve this problem or is my fone bricked? your help would me much apreciated
Solved !!!!!
Wooooooohoooooo av sorted it i found a thread at http://forum.xda-developers.com/showthread.php?t=415049 that told me how to hard reset it

[Q]Help with P3450

I have received one elf with is stucking on calibration menu,everytime that i press all the 5 positions again it keeps on asking for it and i cant get to the phone.
Phone is detected by activ syn ,i want to upgrade the rom but as i'm having this problem i cant upload cert and enabl files.I cant do hardspl nothing.
Is there anyway i can repair this phone.It has got 2.26.00 spl.
Regards
I had the same problem.... but I just hard reset my phone with the styles and started my phone again and then pu it fast on my computer and started the upgrade to 2.28 and the my phone worked correctly.
Maybe I've made some mistakes but that's because im 13 and I live in Holland
I hope its good information for you!
hi sonkar read this thread http://forum.xda-developers.com/showthread.php?t=445666
i agree with marcbrug .. try to do a hard reset .. that is by holding the End & the Call Buttons and soft reseting the phone.. when the confirmation msg appears press the "Middle" (the largest) button..
hope that helped...
I have already done the hard reset,it's the first thing i did but still facing same problem.
sonkar said:
I have already done the hard reset,it's the first thing i did but still facing same problem.
Click to expand...
Click to collapse
It's happened to me a couple of times. I just re-flashed the ROM (hard reset did not work).
Can you explain how i can flash the rom?
Cos as the phone gets stuck in calibration i cant install cert and cab files in the phone.So i cant do hardspl and neither flash the rom.My spl is 2.26.00.
Regards
sonkar said:
Can you explain how i can flash the rom?
Cos as the phone gets stuck in calibration i cant install cert and cab files in the phone.So i cant do hardspl and neither flash the rom.My spl is 2.26.00.
Regards
Click to expand...
Click to collapse
You could probably still install it manually if you are able to connect to ActiveSync during the screen calibration.
First, try installing "myMobiler" which allows you to access the phone from your PC (like in Remote Desktop). See if you can get any further than the calibration screen with that.
Otherwise, download the "itsutils" package from here:
http://www.xs4all.nl/~itsme/projects/xda/tools.html
Then, use "prun" to remotely launch the CAB file from the DOS window:
e.g. C:\> prun.exe \Windows\myfile.cab
I have never tried this command with CAB files but it worked with Windows Mobile EXE files.

please help!! after ROM upgrade the device stuck completely!

please expert guys help ...
i have new leo with ROM 1.43 today after trying to upgrade to ROM 1.66 I did everything as asked, the installer began , with all the colours on the leo display then it started the percent completion counter , and after 2% it wrote me error something , and the leo restarted but stuck in the white start up menu with the green HTC icon and below the R G D information but the device doesnt proceed further and stuck here !!!
please help !!!!
it write me as i recall
it wrote me if i recall right :
INVALID MODEL ID
did you install HSPL before trying to install the ROM?
no i didnt try to install anything !
no i didnt try to install anything ! , just started the intallation file ROM arabic-english , and did what i asked to do !
if i didnt install hspl what can i do ?
can i take the device to the shop i bought it from and use the warranty ?
well, no...did you get the file from HTC direct or off here? your phone could be vendor locked to your provider so if you can get the original ROM that was on your phone you can flash that back on...
you should really read into things before jumping in at the deep end...
well i have an inlocked device ...
o bought the device in europe , but i am from israel , htc sent me notification about new arabic ROM with link , i tried with my serial to download but couldnt , it wrote me "this upload not compatible with ur device" , i downloaded it from here XDA developers , but it went wrong !! , the problem that the phone stuck in the loader menu , before uploading the sense interface , and i have no connection between the pc and the phone "no active sync" so how can i reinstall the older version or make the phone load again ?!!?!! plz help !
you need the original ROM and a connection to your PC. run activesync as even not working it should connect up...
no there is no connection the device centre says not connected
the phone is not responding and the pc doesnot establish connection with it , i am stuck with loading menu with the R 2.04.50.22~2
G 15.26.50.070
D 1.43.7024
from there nothing moving , if i do soft reset it , it stucks again in the same menu !!!
i didnt install HSPL , and i guess i tried to install not the correct region ROM upgrade , the phone was purshased in lithuania , but htc offerd me middle eastern ROM because i want the arabic - hebrew support !
plz help
You could try installing the Shipped ROM via microsd card method. Just make sure your battery is above 50%. then follow these steps:
1. Using 7Zip, Open your Shipped ROM.exe (You need your exact shipped ROM for this, anything else will give you the error you got)
2. Look for the "RUU_signed.nbh" (without the quotes)
3. Copy RUU_signed.nbh to your microsd card AFTER formatting the microsd as FAT32 (quick format works well enough, using Win 7)
4. Rename 'RUU_signed.nbh" to "LEOIMG.nbh" (again, without the quotes)
5. Take out the HD2 Battery and insert microsd card in slot.
6. Put Battery Back on and hold the "Vol Down" key while pressing the Power key
7. Follow the instructions on the screen... (remember you need at least 50% battery power just to make sure everything goes as planned)
8. Soft Reset after your done and you have a "Fresh" Shipped ROM on your HD2!
Optional:
9. Install HSPL (use the guide that's been stickied in the ROM Dev Section)
10.Flash the ROM of your choice via MicroSD method or activesync (again, please read the Stickied guides in the ROM Dev Section)
Good Luck!
total storage 328 instead of 180 !!!
well i didnt need anything to do, i pressed and hold the up vol. and down volume and pressed the power key , it did a hardreset and my old ROM back to me , though i noticed strange thing !!!
after the hardreset back to my old ROM i checked the SD card & phone storage and i found that i have now total storage 328 instead of 180 !!!
but then i upgraded my ROM this time with legal one from HTC support site , and the total storage got back to 180 again !!!
anybody knows what happened here ?!
p.s thank u guys for the help

imate jasjam error flashing pls help

hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken

Bricked Jasjam , plz help

Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
I think I've got same problem..
It can't run again after splash screen..

Categories

Resources