Database Users

XDA ORBIT not able to flash ;(

Hy..
belive me.. i tried nearly everything... and ive been through all of these posts... but i dint find anything helping me out with my problem...
ok, i try to explain in a short way!
I want to upgrade my "old" xda orbit (rom: 3.4.207.2GER, Rom Date: 18.04.07) wit a new rom ( something like "Artemis_Touch_4.02_Full_with_4_sided_cube")
BUT IT DOES NOT WORK!
Yesterday i updated my "new" DIAMOND to a new rom (Bepe 0.94)... so i basicaly know what to do..
But my ORBIT doesnt like to be upgraded..
USPL: doesnt work
RUU: doesnt work
Artemis_Touch_4.02_Full_with_4_sided_cube: doesnt work
downgrade to wm5: doesnt work (dindt find the correct one, i guess...)
now i am out of any more idears... ive got a lot of error messages... such as 260, 270 corrupt files, and many more...
wonder why my orbit is still running after all these unfinished and unsucessfull "updates" but still running with original german O2 WM6 system.
Does anybody can give me a hind what do do, how to update or where to look?
Thanks a lot...
Using Artemis USPL: in the DOS window always the message "program cannot be found".. running aprox up to 50% and stops, than closing the DOS windo
the orbit stays, after a short action showing the Linux guy, with a "white/black" display..
than using the RUU: still connected via usb to my pc.. still black display..green LED on top of the device on..checking the rom.. showing mine correct (3.4.207.2) to 9.99
clicking "next": starting updating... pda display gets threecolored.. than gray.. showing 99% and than 100% after just a few seconds..
Prog stops.. telling me that the file is corrupt (Error 270).. my device reboots and starts with the O2rom
I downloaded the Artemis USPL several times from several locations.. always the same message...
Hard to explain.. but i hope you got my point?!
Btw.. thats just one of the ways i tried.. and just one of my errormessages..
Thanks

Did you tried to remove your SD card before you flash?
Cheers

I Got It I Got It
Thanks "Zecanilis" for your answer.. but that was not my problem.... i took out the sd card as well as the sim card.. as i said.. i tried nearly everything!
But this morning ( i spent the whole night in front of my computer ) i foud the mistake.... an easy one!!
The "Artemis_USPL" file, you can find in all of these threads, is not working with my devices (pc and/or ppc)!?! i dont know why.. but it doesnt.
As i told you i always got messages in the DOS window "program cannot be found", "program cannot be used"... and the intallation skipped all files and stopped always around 50%.
but at 3 in the morning i found a USPL file in the net, with a different name, and it worked with the first try!!
The File is named "arte_uspl".
Just worked fine and smooth 10..20..30....... finisehd.
I am able now to install any rom I like!
Btw... i swithed to Mossis V2.2Ger - a very nice one i think.
But maybe i'll try some more...... because i am able to!
Take care and a lot of fun with your devices!
Bobo

I have the same problem
Where can i find/download the "arte_uspl"?
Thanks for your help.

well...good question
i didnt write down the link.... i dint save the link... sorry!
what i did was to save the file on my computer!
i tried to uplad it to this post... but it didnt work?! sure i am to stupid to do it right!?
so plase help me to post it here, and i will do so!
or gimme a mailadress to send it to!
sorry for beeing so stupid!
greetings

orbit do not boot, do not flash
Hello,
i am searching for a solution of my problem:
i updated my orbit with the new mossis ROM and everything was well, and i used my orbit after this update!
Yesterday i Reset my device and after this the orbit dosen't start again!
After showing the bootsplash the device hangs
So i try to flash the device again:
first i try this:
- start the bootloader manually (voice button + reset)
==> shows: IPL 3.04.0001
SPL 1.11.0000
- starting the ROM Update Utillity
==> the screen of my orbit is grey and shows the update bar (0%)
==> RUU shows the following mesage: ERROR[300]: INVALID UPDATE TOOL
(i used the original german o2 update file)
second try:
update with the SD-card:
- SD-card (512MB) formated with FAT32
- copy the image file xxxx.nbh to the SD-card and rename it to ARTEIMG.nbh
- start the bootloader manually (voice button + reset)
==> screen: Checking SD contens
==> Update SD Image?
- bushing the volume down button
==> screen is red green blue and shows IPL 3.04.0001 and SPL 1.11.0000
Update flash do not start!!!
if i try this sd-card based update with the RUU_uspl_signed.nbh file, the device bootloader start and update the ROM
have anyone an idea???

ohs said:
Hello,
i am searching for a solution of my problem:
i updated my orbit with the new mossis ROM and everything was well, and i used my orbit after this update!
Yesterday i Reset my device and after this the orbit dosen't start again!
After showing the bootsplash the device hangs
So i try to flash the device again:
first i try this:
- start the bootloader manually (voice button + reset)
==> shows: IPL 3.04.0001
SPL 1.11.0000
- starting the ROM Update Utillity
==> the screen of my orbit is grey and shows the update bar (0%)
==> RUU shows the following mesage: ERROR[300]: INVALID UPDATE TOOL
(i used the original german o2 update file)
second try:
update with the SD-card:
- SD-card (512MB) formated with FAT32
- copy the image file xxxx.nbh to the SD-card and rename it to ARTEIMG.nbh
- start the bootloader manually (voice button + reset)
==> screen: Checking SD contens
==> Update SD Image?
- bushing the volume down button
==> screen is red green blue and shows IPL 3.04.0001 and SPL 1.11.0000
Update flash do not start!!!
if i try this sd-card based update with the RUU_uspl_signed.nbh file, the device bootloader start and update the ROM
have anyone an idea???
Click to expand...
Click to collapse
Dear ohs,
There are many ppl, who have this Error 300 issue, but there is no help/solution available anywhere. Maybe the best option is to send your device to HTC, I guess they'll replace your motherboard, if in warranty you'll be lucky!!! unless they find out if you have messed up the device

xda orbit
same problem here,i tried eveything,my xda orbit wont flash it starts to instal the new rom but when it reaches 3% it resets himself ...any sugestion guys ? i tried upls,hard-spl etc arthemis rom everything . help please

Guys, I would suggest, if your device is under warranty, do send it to HTC Service center rather than breaking your head with it. Even I have been through such problems but ultimately I sent it to the service center and expecting my device in a couple of days with a motherboard changed.
If your warranty is not valid anymore then you are in trouble.
Good Luck

Xda Orbit
dose anyone knows the right stepts to flash this Xda Orbit German rom with a wwe rom ? please post it so we can try,i have this xda for 1 year now and iam still using the german rom on it,i what to start to use it but what can i do ? learn german ? somebody help ! i tried to flash it with RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship all gose well untill 3 % from update the xda resets and gose back to his rom,please help me out ! i`ll mae a donation for this cause ! Thanks

arte_uspl
bob75 i found the rar arhive for your arte_uspl the link is : http://rapidshare.com/files/36943423/arte_uspl.rar

Problems with FM Radio & Camera

Hi all,
I encounter some problems with the polaris. When I want to use the camera I encounter the message:" unable to initialize....".
I also encounter problems with the FM radio: when I want to use my radio, it starts up, you see the screen, but no sound radio stations can be found. This means no radio functionality as well.
I've perfomed soft reboots but also hard reboots (so it initializes completely again). I also tried new ROMs. Nothing helps. Anybody recognizes this problem? Looks like that it has problems initializing the radio/ camera function.
Is there an update available which could fix this problem? My device is not damaged at all. Or would there be an other solution, as far as you know? Furthermore, the phone works perfectly. Hopefully you can help me with this.
Thanks!!!
Greetz,
M

First flash ur pda with :
http://www.4shared.com/file/46948092/9e97bc37/Radio_Murata_1582123.html
or
http://www.4shared.com/file/54732373/c9f753c5/Radio_Murata_1582514.html
If that doesnt work.Keep the one murata radio on your pda and flash another win mobile rom(without radio rom).
I prefer khanx vanilla v6 (radio isnt working, http://forum.xda-developers.com/showthread.php?t=398796 ) or swtos roms (http://forum.xda-developers.com/showthread.php?t=404977 )
look also:http://forum.xda-developers.com/showthread.php?t=414436
Other radio roms are crap....

2 ALL. My FM radio very very poor, allways noice & appear and disappear signal, in same moment - mobile phone samsung about 200$ give 100% better quality
any suggest ?maybe need forget to use radio in cruise ???

Hi Badguy,
Yesterday I tried to flash my pda, as you said, with the radio rom "http://www.4shared.com/file/46948092...a_1582123.html". the update ended up in 99% completeness. So now....I have the tri color error (so I cannot use my phone). Hopefully I will be able to restore it again.
You have any tips?
Michel

hi.
Yes i forgot to tell you, that u have to flash HARD SPL first, then u can flash any custom rom and any radio rom.
Now, u have to flash ur pda with original touch cruise rom, which will restore your pda to normal working mode.Original rom is on CD, which was in box, when u bought ur phone.When the iriginal rom is flashed, u do the hard spl, then u can flash any software made for polaris.

Hi,
Thanks for the info...I am not aware that I received any CD's with original roms.
If I have not received any CD with Rom on it, can I not just update the ROM with ,for example, Diamond r7 Rom?
I tried this, but I didn't succeed. Normally I connect the phone to my pc, then enter the 'bootloader mode (from hard SPL)' on my pda by starting up the bootloader on my polaris and then I run the new ROM from my computer. When I use this procedure, the ROM is updated. I used this procedure as well for this 'flash'.
Since I have now the permanent tri-color, and therefore cannot enter bootloader, how can I update my ROM to the original version (or to any other ROM)?
Any further tips?
Thanks!
Michel

ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
U need this rom, This version u should get with the phone.But it doesnt matter now. just ON/OFF the phone, connect it with cable and pc. Start flashing. Then make hardspl.
Did u hear for flashing through microsd card?? All what u must do is:
1. U have to have memory card in mode fat32.
2. Put onto the memory card rom file. Usually is named something.nbh .You have to rename it to POLAIMG.nbh .
3. put the memory card into the PDA and u have to go to bootloader mode ( press the camera button, make soft reset with stylus and u have to press camera button all the time, until u get 3color mode.
Radio roms, splash screens, roms , all, u can flash with microSD mode.
btw http://forum.xda-developers.com/showthread.php?t=381600&highlight=microsd Its a MUST!!
Hope it works now.

badguy999 said:
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
U need this rom, This version u should get with the phone.But it doesnt matter now. just ON/OFF the phone, connect it with cable and pc. Start flashing. Then make hardspl.
Did u hear for flashing through microsd card?? All what u must do is:
1. U have to have memory card in mode fat32.
2. Put onto the memory card rom file. Usually is named something.nbh .You have to rename it to POLAIMG.nbh .
3. put the memory card into the PDA and u have to go to bootloader mode ( press the camera button, make soft reset with stylus and u have to press camera button all the time, until u get 3color mode.
Radio roms, splash screens, roms , all, u can flash with microSD mode.
btw http://forum.xda-developers.com/showthread.php?t=381600&highlight=microsd Its a MUST!!
Hope it works now.
Click to expand...
Click to collapse
Hi,
I have tried the above steps. I have downloaded the rom, upacked it and renamed into POLAIMG.nbh
I pressed the camera button all the time and performed a soft reset with stylus. The following happens:
1. The three color comes again (it says: POLA100, SPL-1.25.0000, CPLD-2; in the red part; also in the above right corner of the red part it says: RUUNBH).
2. Then it turns into a white screen with: 'Loading...'.
3. After that it says...'checking...'
4. After this it says:
"0025002
not allow"
Then it returns again to the three color with same text as above.
Do you know any tips to solve my problem? Hopefully you can help me!
Kind regards,
M

Here I am again.
I now concluded from the text in the red section, that I indeed don't have Hard-SPL on it. I think this causes the fact that it is 'not allowed''. Would you agree on this one?
This means that I need to install HARD-spl from the tri-color situation.
This is the next big challenge I think. Do you have tips for me? Hopefully we will [email protected]
Greetz,
M

badguy999 was trying to tell you that about 3 or 4 posts back. Yes you must HardSPL your device before you load anything other than the Stock ROM. Read and follow the following thread to hardspl:
http://forum.xda-developers.com/showthread.php?t=375338
also read this
http://forum.xda-developers.com/showthread.php?t=370434
hope this helps... good luck
mewsijben said:
Here I am again.
I now concluded from the text in the red section, that I indeed don't have Hard-SPL on it. I think this causes the fact that it is 'not allowed''. Would you agree on this one?
This means that I need to install HARD-spl from the tri-color situation.
This is the next big challenge I think. Do you have tips for me? Hopefully we will [email protected]
Greetz,
M
Click to expand...
Click to collapse

Hi,
I know that I need to install Hard SPL and I have read the threads you mentioned (before). The thing is, how can I install Hard SPL without the use of any active sync. In other words: how can I install Hard SPL by using the SD-card?
If you can help me with this...it would be great.
Michel
bkeaver said:
badguy999 was trying to tell you that about 3 or 4 posts back. Yes you must HardSPL your device before you load anything other than the Stock ROM. Read and follow the following thread to hardspl:
http://forum.xda-developers.com/showthread.php?t=375338
also read this
http://forum.xda-developers.com/showthread.php?t=370434
hope this helps... good luck
Click to expand...
Click to collapse

U cant. First u have to flash original rom to make the pda working again. Then u can install hardspl through cable. original rom can be flashed with microsd method.
Are u sure that u have memory card in fat32??Cause error u described few post before.

Hi,
When I want to flash it with original rom (rename the rom to POLAIMG.nbh, it starts loading, than checking, and than it says 'not allow....and a number' See also a few posts back. I formatted the SD to FAT 32
Somehow I'm not allowed to install the original rom. Therefore I thought that I needed to install Hard SPL.
Or should I press a combination of buttons on my phone? When I press the camera button and then soft reset, the same happens, when I just reset (he tries to load the image, but does not work).
I'm now allmost through all my options here. Hopefully somebody can help.
Greetz,
michel

camera problems
Hi,
as far as i understand the "cannot initialize" camera problem is a know HTC hardware problem and the only solution to it is to send the phone to HTC for board replacement.
(it might suddenly start working for some time - i saw reports that it happens , but than the problem will probably return -- there are lot of touch cruise users i saw with this problem and the only known solution i saw was HTC repair)

Is true that the polaris is "weak" phone. mine had trouble with connecting to 3G. And during calls, persons didnt hear me well and from time to time i was muted . So, they change motherboard.
Polaris has really weak signal strenght. Far far better signal i got from tytn2 and trinity.With regular radio rom...

Please help...jamin coloured boot screen keeps showing..your help is needed

hi everybody..
Can anyone help..I tried to upgrade my jamin to wm6 prophet..everything went ok and iwas told that the upgrade was successful,
but when I restarted it ..the coloured screen keeps showing, I tried to hard reset ..but still the same problem.
I'll be grateful if you could help me..for I'm in a place where your help is needed necessarly

look here -> http://forum.xda-developers.com/show...23#post1027323

look here -> http://forum.xda-developers.com/show...23#post1027323

thnx Neo..HTTP 404 NOT FOUND

That`s not from me, that`s the tread:
Problem solved ! Please, stick this post up - I saw A LOT of people in this forum to ask how to resolve situation with "STUCK ON START-UP SCREEN" ... no one full answer. So ... solution :
1 step. Download one working for YOUR G3 or G4 version ROM. You can easly recognize the difference
G4 ROM on startup screen looks like
IPL 2.10.0001
SPL 2.13.0001
Look at last digit - if it's like 0001 - its G4 ROM. If it ends like 2.00.000, or just 2.00 - then its G3 hardware version.
So G4 (2.XX.0001) users can use any G4 ROM like this one ( tested by me ) -> ftp://xda:[email protected]_ship.zip
G3 (2.XX) users can use this ROM -> ftp://xda:[email protected]_v2307.exe This ROM is not tested by me, but I have read a lot of good responses about it.
2 step. First prepare the phone - full charge battery. After that, hold CAM + COMM buttons ( on the left side of the phone ) and reset it. You will be bringed to so sadly famous "three colors screen". Now connect your phone through USB and start Updating program that you have downloaded before. Sit back for about 15 minutes ( dont get nervous when it stucks on 80% ... it had to pass it after time). If everything goes smooth - after reset you must to have working phone again.
2A step. If you get error message ( like I did first time )
ERROR [294] : INVALID VENDER ID
You have to make few steps, a little more complicated then pressing NEXT buton couple of times.
First, download this cracked version of ROM Update Utility program. Can be found here -> ftp://[email protected]/Pro...NoVendorID.zip , then
1. Download and install WinRAR ( http://www.rarlabs.com/ )
2. Click with right button on program that updates ROM ( like RUU_Prophet_G3_2151327_AKU23_023021_P12MB_PDAMobiz _v2307.exe ) and choose Extract to...
3. Replace in directory you just extract archive file ROMUpdateUtility.exe with the same file from the archive you have downloaded early (ftp://[email protected]/Pro...NoVendorID.zip )
4. Now, run ROMUpdateUtility and this time there will be no WRONG VENDER ID error.
Good Luck

NEO thanks for your time..
my jamin is G4 ..when i open the ftp link you gave ..>Prophet>shipped complete updates....i cant find _ship updates... only radios,ext roms
so what should i use in this case...
thnxs again

You must flashed an orig. WM5 rom. Please search. I can`t do this things for you. So many treads are here, about your problem.

Bricked Jasjam , plz help

Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....

if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.

Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??

I think I've got same problem..
It can't run again after splash screen..

[Q] Wildfire SDCard Update .. Help

I have t-mobile UK unrooted + simlocked
When i power on phone .. Round red icon comes on screen , then HTC logo & some music , then again tmobile logo comes & move a little & phone hangs there .. not going forward
Hard reset not helping
i have downloaded this rom
RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_signed hboot + radio removed .
I make a gold card & rename it to update.zip but updating not starts
HELP
i am a newbie in this
Thanks

anyone know which name to be set in update file

Who can help me here ?

You don't need to rename it to update.zip, just select install zip from sd card.

Download the right rom from shipped rom for your phone and run it from your PC
I don't think you can use the file you mentioned above as your phone is not rooted ( I might be wrong)

foxy6800 said:
Download the right rom from shipped rom for your phone and run it from your PC
I don't think you can use the file you mentioned above as your phone is not rooted ( I might be wrong)
Click to expand...
Click to collapse
Tmobile UK Shipped Rom for wildfire .. i am searching for last 2 days but did not get it ..

http://shipped-roms.com/shipped/Buzz/
tmo stand for T Mobile ( I think)

foxy6800 said:
http://shipped-roms.com/shipped/Buzz/
tmo stand for T Mobile ( I think)
Click to expand...
Click to collapse
Thanks
let me download & check it up
RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed.exe
is this supports rooting ?

Update comleted by Shipped Rom
but still same position
Round red icon comes on screen , then HTC logo & some music , then again tmobile logo comes & move a little & phone hangs there .. not going forward
so the problem is related to any H/W issue ?

http://img703.imageshack.us/img703/4314/82699533.jpg
this is the condition on phone

what type of forum is this ??
no one reply's ??? Just reading ... Ugghhhh

Have you tried holding the volume key down and switching on the phone
then facotry rest

yes offcourse ... Hard reset was always my first step ..
update with shipped tmobile uk rom .. Then hard reset again but still same

Can you not run unrevoked?
Sent with love from f0xy while mobile!

how can i unrevoked it if USB debugging is not ON ... ...
i think problem is from h/w b/c if shipped rom is flashed OK & phone still have same problem then it must be hardware problem