ELF0100 breaked while updating - Touch GSM General

Hi
i have elf0100,last night i want to do new rom in mobile
i run the upls and when it goes to the end of step 2 i run rom .exe setup manually
mobile was off at that time i update the rom and bar goes to the end but only on computer not display any sort of bar on mobile
after the process going to 100% mobile starts back
but
mobile on only to smartmobility screen and goes off again
mobile was going to boot mode screen(tri colour screen)manually
charging ok,tri colour screen ok
i just tried all the roms but no vail
mobile,s CID was locked
i try to see info on MTTY but after putting command answer was password required.?
plz guide me step by step how can i get out of this situation
thanks
BR
yashaka

did you try loading the official rom while in bootloader mode?

Related

Upgrade failed is not possible boot

Halo, please i need your help. I thing i make a block from my MDA Compact III. I try to install new ROM with WM6 to this device. 1 step unlocking was successful but when i downloaded new ROM inside MDA Compact III the process freeze at 65%. Update software told me, replace battery, start-up and when you see 3 color screen start process again, but the phone try to start with new ROM. After start-up device display system info and boot process freeze. It is not possible to connect via USB to the computer (device is not visible). Any idea please how to solve this problem?
press the power and voice command buttons and while you holding the two buttons soft reset your phone - the three colors screen will appear - hopefully
start ur rom update utility without the uspl - cuz uspl need active sync
the problem was in ur rom image try to get an official rom and flash it when u reach the the three colors screen will appear
btw the the three colors screen - is called boot loader !!
let us know

Big Problem M650 Dead

Hi,
I have a big problem, i when i started my SPV M650 (Orange phone) 2 days ago it didn't want to start (blocked on orange splash screen) so i made a hard reset and it was working.as i didn't want to keep orange OS i tried to flash it.
As a newbie, i tried to flash it with a HTC Rom without unlocking the CID. and..... didn't work !
Retry : updater says no system at all was installed on the phone then, it had passed by and installed the rom (don't know why)
yap, installed but didn't work! still blocked on splash screen sometimes go on WM6 welcome screen and one time accessed the Windows Mobile.
And one hour later.... black screen !
So, i tried to reflash it in bootloader mode with the original orange ROM, it worked, but still blocked on the orange splash screen and the OS version written on this screen was 1.84.0.0 (it should be 1.84.73.2) and screen was brightening so reflash a second time with that original rom, error 276: update error. Now everytime i start the phone, it is in bootloader mode with RUU written on it (in update process i suppose) and everytime i retry to update, error 276: update error. then tried with SD card: card no recognized and still blocked on the bootloader mode update process.
So,
- is there a way to update or flash the bootloader ?
- has my phone his hardware totally crashed
(because i think orange won't never accept warranty, even in normal way they only accept it when you are dying front of their door, and its not sure if they could kill you just for pleasure they'll do)

Issue of Using Athena Unlocker

First of All, I am Noob for all this flash phone stuff~~
I was using A-Unlocker last night on my Athena, however the phone got f**ked up
I was able to finish the Step 1 "Flash SPL". After I done with Step 1, here is I got from bootloader 3 Color Screen
ATHE 100
IPL-V1.00
ATHE100
SPL-V1.20. Olipro
and it unlocked Step 2 "Unlock Radio"
after the Step 2 there was a Notice popped up "Your Device must now be unlocked with a program, please configure your device and then connect and sync with Activesync. after doing so, click OK and watch your device screen"
and My phone stop at HTC loading screen, not able to boot to "Window Mobile" system. I did reset phone many times but didn't work.
Please Help Me Out here~~ Tyvm
p.s: I can still boot the phone to bootloader 3 Color Screen
please help me
Your device is okay. You can already proceed to flashing any ROM that is desgined for SPL 1.2. If you want just a good looking ROM, you might want to try PK3.0 ROM. If you want WM6.1, try irus ROM.
If I'm you, I'll skip any rom that uses SPL3.5 for the time being until you're sure there is a mean to come back to SPL 1.2. This mean you should skip AP4.0 for the time being.
To flash one of the SPL1.2 based ROM, remove your storage cards and SIM cards, and ensure your battery is close to full. Then get into Bootloader mode (by pressing down the Camera and poke into the reset hole - hold it down for a good few seconds until you see the tr-colored screen). Then connect your cable until you see USB on the device screen. Then on your PC, start the RomUpdateUtility program and follow the instruction on the PC.
Good luck.
Thx, man! U Rock!!
Just flash the phone with PK3.0 Rom~

HTC Touch 3G+Windows Mobile 6.5 Help

Hello
1.JadeHard-SPL_V41 On Mobile screen info Unsuccessful.
2.Image OS RUU_signed_EssPack_CE_OS_5.2.21501_Build_21501.5.0 .70__OEM_2.32.723.2__SPL_2.32.44800.7z Test-1 (You need JadeHard-SPL_V41 for this)
3.Mobile ON Power and volume down (3 colours screen, Info on screen JADE110 64MB SPL-1.71.0000 MicroP-Jade (LED) v5)
4.Drop image OS on CustomRUU next next in window verify that you want to update the ROM ver. From Image version I don't have nothing , to Image version it's 2.32.405.3.AMMU
5.Next and I have progress bar on computer and on Mobile but nothing happens 0% and on end I have info ERROR 262 :UPDATE ERROR and button recovery
6.Mobile still works fine
How to do this properly, How put Windows Mobie 6.5 on my HTC
Please Help HTC Touch 3G (Orange)
sorry about my language
Read this again (first post):
http://forum.xda-developers.com/showthread.php?t=483465
and you'll see that HardSPL V4.1 wasn't installed succesfully, cuz bootloader (your point 3) says you still have stock SPL. That's why you can't flash a new ROM
Make sure you read (and read, and read...) the above thread carefully and perform every required step fully, i'm sure you will figure things out.
good luck!
1.JadeHard-SPL_V41 On Mobile screen info Unsuccessful.
2.Image OS RUU_signed_EssPack_CE_OS_5.2.21501_Build_21501.5.0 .70__OEM_2.32.723.2__SPL_2.32.44800.7z Test-1 (You need JadeHard-SPL_V41 for this)
3.Mobile ON Power and volume down (3 colours screen, Info on screen JADE110 64MB SPL-1.71.0000 MicroP-Jade (LED) v5)
4.Drop image OS on CustomRUU next next in window verify that you want to update the ROM ver. From Image version I don't have nothing , to Image version it's 2.32.405.3.AMMU
5.Next and I have progress bar on computer and on Mobile but nothing happens 0% and on end I have info ERROR 262 :UPDATE ERROR and button recovery
6.Mobile still works fine
How to do this properly, How put Windows Mobie 6.5 on my HTC
Please Help HTC Touch 3G (Orange)
sorry about my language
Any toturial inc. screens please

Up rom 6.1 error 270 help me

I up my shadow to 6.1 . The first time it went to 100% and restart with an error 270 : the image is corrupt . After, when I boot loader, it go to 2% and restart every time ( many)
When it restart, I can't enter the homescreen, it came to the green screen and hang.
Help me please. (
My shadow is frozen...! also
dear all experts ...
I have the same problem:
I'm stucked at bootloader mode and tried many roms but no one sucsess ... all of them reach 2% and then stopped.
even I tried the original one (Shadow_Software_Update_1.11.531.5.exe) from t-mobile official site but also same result.
so can any one help me and give me any solution to try?
have you guys both ran the CID unlocker?
dear t mobile shadow rom developpers,I've the same problems as the other,and I think that the phone should be cid unlocked via bootloader,as in my case,I've recently flashed my shadow with wm6.0 but their was an electricity faillure,and now it just hang on the splash screen,and when I use mtty and set 32,I saw that my device is cid locked but mine has no os for now,and I can do hard reset,enter bootloader,but I'm not able to flash any over os,as well as the original t mobile rom,so please,help us to revive our loved phone,please,I love this phone so much but I have not enough money to buy a new one

Categories

Resources