Database Users

After upgrading my device hangs-up at splash screen

Hi all,
This is my first post :x
I downloaded the ROM (4.00.10) from the kitchen. At first, I downloaded EXE file but when I start upgrading my Qtek reboot and nothing happen, I tried many times. I read about upgrading via SD. I did upgrading without any problem. BUT when it finish upgrading, my device won't start. It hangs-up at splash screen and showing ROM version and Radio Version only. I tried many many times with no success.
I need some help please
my device info:
ROM version: 3.18.04 ENG
ROM date: 05/22/03
Radio version: 4.21.00
Protocol version: 32s54
--
Model No.: PW10A1
Bootloader 5.22
--
Thank you in advance
Bailamos

Download again with NB0 then upgrade from your SD.

Download again with nb1 then upgrade from your SD.

Thank you, socheat.
But I did download nb1 and I tried upgrading with the sd method and the upgrading was successfully but my device won't startup it shows only the splash screen ( NOT FOR SALE ** Powered By Micro$oft ** ) and nothing happen after this screen
I restored my old rom (3.18.04 ENG) and the device is working now, but I want to upgrade to WM2003 :roll:
Is that cuz I upgrade the Radio ? my old radio version was 3.25 ( not sure ).
Thank you , All
Bailamos

Got same problem with you Bailamos
My Bootloader is 5.17
Now by XDArit + SD flash + Wallaby patch, I brought my XDA back to 3.20.06 original from O2 already.
Wondering should I downgrade Bootloader to 5.15 or not?
In XDArit it has one upper box which we can put Bootloader in.
Should I put something like "loader515.nb0" in that box during loading OS on SD?????

UP :? Please

update
Please , I need help.
I tried to downgrade my device:
Bootloader 5.22 => 5.15
ROM 3.18.04 => 14.04
I thought it may help upgrading but that complicate the problem!!
NOW , I can't do any upgrade. When I insert the SD card and start booting, it show me the boot screen : PRESS ACTION to start downloading. as soon as I press ACTION it show : GSM OK and nothing happened!!!! It looks like I pressed the exit button ( I PRESSED the ACTION )
The EXE method still not working , the same as before as soon as it shows : 5 min screen , my device restart and it lose the connection with the ActiveSynic
ANY one CAN help ? P L E A S E
Pretty Please
Thank you

yes it will loose sync, but just leave it there!
some times it takes 10 minutes
but it will finish updating, trust me! that worked several times for me.

Thank you , ntabikha.
I'll give it a shot right now.

it didn't work
when my device re-start , the Program ( 1.09 ) show this message:
Can not open a COM/USB Port. Please use Device Manager on PC to make sure that COM/USB port is available and working properly
and terminate immediately after pressing " Ok "
I think there is something I don't know !! but there is someone may know !!
Is that happening cuz I upgraded my Radio Stack ?????????? ???? ???
It was something about 3.xx and it is now 4.21 !!!!!

Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...

sumaetee said:
Got same problem with you Bailamos
My Bootloader is 5.17
Now by XDArit + SD flash + Wallaby patch, I brought my XDA back to 3.20.06 original from O2 already.
Wondering should I downgrade Bootloader to 5.15 or not?
In XDArit it has one upper box which we can put Bootloader in.
Should I put something like "loader515.nb0" in that box during loading OS on SD?????
Click to expand...
Click to collapse
Have you tried doing it without the Wallaby patch part? If not give that a try, no on the bootloader downgrade part!
HTH

Hello
I did downgrade my Radio stack. It was 4.21 now it is 3.23.01
But that didn't change anything. I'm still can't upgrade my device to 2003.
The problem is:
Method 1: (Program A / B)
my device re-start and the program showing this error msg:
" Can not open a COM/USB Port. Please use Device Manager on PC to make sure that COM/USB port is available and working properly "
Method 2: (SD)
It shows me the upgrading screen
Press ACTION to start downloading
BUT when I press action it go the bootloader main menu:
GSM OK
!!!!!!
That's it !!!
At the first time, my device was able to upgrade but it freez after finishing the upgrade. Now, it wan't even upgrading !!
ANY HELP !! PLEASE ??
** to the people who saying you can't downgrade your radio stack , that's not right .. YOU CAN .. I DID IT **
Bailamos

CID unlock from bootloader ?

I have original HTC Advantage 7500 not branded with Spanish windows . After tried to update with English RUU my htc Advantage stuck in 3 colors boot-loader mode. Any resets(soft, hard, boot-loader) not help.
Than I find this suggestion here I tried it and it help:
I think you are not stuck in bootloader, I think you are stuck in the Flash
ROM utility which has colors and not just the Dopod logo with a black scree.
If this is the case, here it is what I did to solve this:
I downloaded ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32.
00.10_108_ship, which you already did.
Decompiled the RUU_signed.nbh contained inside
ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32. 00.10_108_ship with
dutty's good NBH tool found at: http://forum.xda-
developers.com/showthread.php?t=296316 then I created a new RUU_signed.nbh
with the same files but it didn't allowed me to insert some items like the
SIRFBootLoader.nb and some others, so I started executed the
ROMUpdateUtility.exe again and it stopped again at 1% but with a different
error "Corrupted ROM Image" and suddenly! My device was taken out of the
Flash Utility to see the bootloader screen again! Wow! What a relief!
Click to expand...
Click to collapse
this is done!
after that my Spanish OS reloaded and I can to do ActiveSync with PC - Than I find the suggestion in this thread how to flash any ROM to CID locked and I tried it and after 5 min connecting error occurred . After hard resetting after this "update", after the HTC boot screen I just get a white screen. The HTC does make a sound as if it's working and BT and WiFi leds blink. When device connected to PC the HTC does make a sound as if it's working, but the ActiveSync with PC not work, it write that can't to connect to mobile device. And I just can't see anything just white screen.
I can't find Spanish HTC Advantage 7500 not branded RUU in all World.
So I need cid unlock without ActiveSync - from bootloader?!
Please help(I also ready to help - I will send donate).

VODAFONE PDA1605 Image corrupt during rom update plz help me>>?????/

i have vodafone PDA1605. i try to update with orignal htc tytn windows 6 rom after one % it says inviled verder id & device restart. after restart after displaying vodafone logo & windows logo screen goes white. i try so many things after that. i try vodafone orignal rom (HER_VODA_1201616_1030600_UK_SHIP) when first start to update with this rom it displayed pocket pc rom ver. when i try next to update this ver with same ver(HER_VODA_1201616_1030600_UK_SHIP) error message displayed check your cable or pda (message no. 260) but when i try 2 update with Tytn win 6 rom. its woking but only one % & message displayed inviled vender id. i try to update spl & radio ver but displayed your image corrupt.
my device IPL-1.00
SPL-2.03
plz help me if some one know's ?

i get that same and i'm with VF it because the phone is locked i think, well thats what i was told

Artemis USPL v.01 upgrade error with 270 code, Please HEPL

Hi Profs,
there are some problems with a Artemis Update SPL (USPL) v.01. I've found this problem is several topic but there was no solution for it.
#1:
http://forum.xda-developers.com/showpost.php?p=1739577&postcount=413
#2:
http://forum.xda-developers.com/show...44#post1745844
#3
http://forum.xda-developers.com/showpost.php?p=1713596&postcount=1
The problem:
use USPL to get rid of the CID....count goes up to 100% screen shows black with green text, then pops to white. I need to do a soft reset to get it running again.
Then i use ROM Update Utility to update my p3300....and it still keeps hanging on 3%....damn. i get mad...!! Have read almost all here online...no virusscanner, no firewall....I use win XP.
i even tried without memory card and phone card....and nothing seems to work.......
ipl 1.14.0001
spl 1.14.0000
gsm 02.07.90
os 1.14.0.0
Who has any clue...?
With other words:
I've just got back my P3300 from repair, they changed the main board. With the previous main board I was able to upgrade the device and I was using the B&B versions.
But with this new board I'm not able to upgade the SPL. When I try to upgade the device after and start the start_uspl .exe the 10...20... ....100 my device become an interresting "blue screen" status and only the reset help to get out from this status. If I start the RomUpdateUtility.exe after the upgrade I got the error message #270
IPL: 3.13.0001
SPL: 3.13.000
GSM: 02.94.90
ROM version: 3.13.405.1.WWE
ROM date: 8/28/07
ExtROM version: 3.12.405.102
This is not the solution for the problem. I've tried it:
Plug in USB cable. Hold voice recorder button and press reset button. Bootloader will appear (Three color stripes). Then you may flash up ROM. (This works only for RUU installation types, not for PDAmobiz modified installator) Original english HTC P3300 ROM you may download form here: http://wiki.xda-developers.com/index...temis_Upgrades ....
Please help us to solve this problem....

Probably the same problem
This should be the same:
Hello POF,
I was directed to this link by Rudegar because I want to change the french ROM to English ROM.
The relevant data of my PDA is:
The version of the ROM: 1.14.406.1 FRE
Date of ROM: 9/27/06
Radio version: 02.67.90
Protocol version: 4.1.13.28
ROM extension version: 1.14.406.101
I tried exactly the way you described in the USPL_manual and everything went well till I got to a stage where I was asked to click the update button which I did. After then there was a window which showed "updating from current version to version 9.99". I was confused at this point but clicked "continue" and after this stage I got an error message and there was no longer a connection bw my PDA and my computer.
Thanks,
Jonat
Reply With Quote
http://forum.xda-developers.com/showpost.php?p=1784337&postcount=430

Also the same
Problem "lost connection PDA-PC"
Hi,
first I would like to thank you for goooood job to many people here !
Back to my problem. I have HTC Artemis (T-Mobile MDA Compact III), OS WM6 T-Mobile Czech version.
I ran start_uspl.exe on my computer. The part in DOS based screen seems to finish everytime OK, but finally the connection with PC is lost. Therefore when the PDA Phone ROM Update Utility starts cheking version the error "lost connection with PC" appears . PDA stay in "black screen" mode and only hard reset start it again as usual.
Does anybody have the same problem? Any idea, how to solve it ?
Thanks
http://forum.xda-developers.com/showpost.php?p=1773030&postcount=426

When the screen goes white, don't restart. Just start flashing to the new ROM. Worked for me

Unfortunately it not a white screen, it a black one, connenction lost with the PC, and only the reset PDA helps to restart the unit again....

lenocs said:
then pops to white. I need to do a soft reset to get it running again.
Click to expand...
Click to collapse
What im saying is when it pops to white, dont soft reset it, just start the upgrade.

Anthony2oo5 said:
When the screen goes white, don't restart. Just start flashing to the new ROM. Worked for me
Click to expand...
Click to collapse
that what i also do When the screen goes white, don't restart. Just start your RUU

lenocs said:
Unfortunately it not a white screen, it a black one, connenction lost with the PC, and only the reset PDA helps to restart the unit again....
Click to expand...
Click to collapse
Same situation as above. Depending on the Artemis, the screen might go white or black. Just don't freak out and keep on flashing the USPL. It WILL work and then reboot. Then you can flash the actual ROM you want.

Hello from an absolut newbie trying his first upgrade,
And I have just experienced the same problem than lenocs.
I have run start_uspl.exe, but when the screen is suposed to become white or dark, it becomes dark and the artemis is in fact totally off and connection is lost.
Anyway I supossed that it was because the scrren got black and I tried to run the update utility, but I´ve got an error (the terminal is disconnected or similar) and nothing happens.
I have had to soft reset the terminal and fortunatelly it seems that I still have my previous ROM and it seems that it works. But, do you know if there could be some "side effect" because the first step of start_uspl script?
Anyway I would like to move to WM6, so, any suggestion would be really appreciated.
Thank's a lot

When you restart, what is the USPL number?

Ooopppssss!
I didn't pay attention.
As I've said, I'm a newbie, so I was just woried because I thought I had "bricked" my new atemis.
How can I know now the USPL number?
Anyway I tried the star_uspl again (I'm a crazy newbie) and it failed. The artemis went off almost inmediately.
Thank you very much for your help
SpiggyTopes said:
When you restart, what is the USPL number?
Click to expand...
Click to collapse

solved ... at least for me
I think the problem is in SPL version 3.13 (or maybe anyone newer than 1.11).
Try different Artemis USPL - for me worked version from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_DumpedRoms
It's very confusional, because file sizes and also dates are the same as in unfunctional version, but this one worked.
Hope it'll help you as it helped to me.

Maybe this can help you
I bought a 8gb card the week before, so I needed to update the rom in order to have my new SDHC working. But whn I was trying to update the rom, through UPSL 1.1, I had an error. This was the first time I had an error because I have modified the room many times before. My error was about a CMD.EXE issue, something like Error code line 26 "can´t spawn cmd.exe" so I was not able to change my rom. What I did was to copy CMD.EXE from Windows/System32 and put in the same folder where I had the start_uspl file, and finally works!
Do not ask me why, but this was the only way I could make works the update process.
Just try.

Rocheau said:
I bought a 8gb card the week before, so I needed to update the rom in order to have my new SDHC working. But whn I was trying to update the rom, through UPSL 1.1, I had an error. This was the first time I had an error because I have modified the room many times before. My error was about a CMD.EXE issue, something like Error code line 26 "can´t spawn cmd.exe" so I was not able to change my rom. What I did was to copy CMD.EXE from Windows/System32 and put in the same folder where I had the start_uspl file, and finally works!
Do not ask me why, but this was the only way I could make works the update process.
Just try.
Click to expand...
Click to collapse
do u have ur card in the phone while updating
you are suppose to remove the card

Problem solved (for me)
Hi,
i had the same problem error 270, 3% and lost connection with Activesync.
IPL: 3.13.0001
SPL: 3.13.000
GSM: 02.94.90
ROM version: 3.13.405.1.WWE
ROM date: 8/28/07
any way to upgrade was wrong ->> error 270
My good way was:
1. Downgrade to WM5 - original shipped ROM 1.12.405.1(link found on Wiki pages)
2. Under WM5 run USPL to unlock CID (now without any errors)
3. Final STEP - Upgrade to new ROM Artemis Touch 3.01 (without any errors by upgrade)
))
Now my Artemis seems to be OK.

I ran USPL with storage card inside the device...
no problem

switch SD card back to 2GB or smaller before USPL
Hi,
for me USPL did not work with my SDHC 8GB card but then I switched back to my previous 2GB SD card and then it works.
Perhaps the SDHC driver blocks USPL in some way.
Cheers,
Markus

i have been trying for 3 months
once i have upgraded my artemis to wm 6.0 everything seemed to be OK for two days... then the screen started to go black when i restart... şi downgraded to 5.0 but nothing changed... when i remove battery for a while, my arte works... when i try to do anything with it, the screen slowly goes black as if it is broken... please DO HELP ME! i am going to go mad... i have a new iphone, ihave i kaiser as well... but i miss my artemis very much...

Hello:
I have the same problem and realized hundereds have too. I have been checking in all forums and no asolution to it
The issue that happens to me is that I used USPL for upgrading to WM6 and worked, but now for the Touchflo it does not. Tried with all USB ports, tried with different computers and no good news.
The USPL msdos screen indicates that there is no connection at all in all percentage levels, then it bocomes dark and the 260 error whne installing the rom.
please help us soon !!!
we are in trouble!!

Same Problem : Screen shut down
Anybody can help us on this point ?
The only way to solve it is to remove the batterie during 30 min., then put it back and pray...
Then, for no reason, the screen shut down, a few minutes or days after
I've upgrade from WM5 to WM6 with the original Rom of HTC, it seems a little more stable but it shut down every 2 days when i'm lucky

HTC Screen Stucked - Nothing Works

Hello Guys.
My nephew has an HTC HD2 (I supose that). It is stucked on the HTC screen. I tried a lot of thing, but nothing works, i'm affraid to make it worst. If someone can help me.
Some informations.
I don't know if it was working with android or windows;
I can access the tri color screen holding volume down and the power button or the reset button on the back of the device;
I already made a hard reset (holding vol up and down and reset buttons) the process was ok but nothing changes.
I don't know what kind of HD2 is it. On the back of phone I have this: HTC HD2 T8585, on the next line some asian characters, next line CCAF093G0600T0.
I tried to put images but i can't, i'm new, so, only link adresses.
This is the image of my tri color screen
i.imgur.com/HtbtBCu.jpg?1
If I try Task29 from Toolkit I receive this error
i.imgur.com/569SjSn.png
I tried all HSPL (HSPL 2, HSPL 3 and HSPL 4) all kind of errors, but the persistent error on HSPL4 is Flow: 00006, Error: 00006, Unknow
If need some other information.. just ask.
Thanks in advanced.

If it has coloured call/end keys (red&green) then it a US T-mobile model
If all keys are white then it the standard model.
Your hd2 has been unlocked by xtc clip box or similar so cid is probably bypassed without need for HSPL .
I would remove sim card & memory card & try flashing a standard windows rom via usb & if fails try using the sd card flash method.
Worth checking windows drivers are installed or just reinstall WMDC (link in hd2 wiki), using sd method removes pc issues from the problem.
If standard windows rom fails try a custom windows rom such as energy as they contain no radio or spl so sometimes will flash fully when hardware nand issues cause full rom to fail .
working rom links & help can be found in hd2 wiki >
http://forum.xda-developers.com/wiki/HTC_HD2

Ohhh.. Very good informations.
My call/end keys are coloured, so, I have an US T-Mobile model, is right?
I forgot to tell, i live in Brazil.
Now, i'm using windows 10, is it possible to use with WMDC? I tried to find a compatible version but no success.
There is a possibility to manage this phone with windows 10?
Thanks.

First thing I would try is flashing the original US t-mobile hd2 rom via sd card method as removes your pc & w10 from equation ...
us t-mobile rom >
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
you will find guides on flashing from sd card if search or perhaps link in wiki !
---------- Post added at 04:53 PM ---------- Previous post was at 04:40 PM ----------
You should have most functionality of wmdc in windows 10, installing wmdc6.1 in compatibility mode of vista sp2 may help, also connecting device prior to wmdc install may load better driver resources perhaps !

Hello again..
I tried to install this ROM by SD card Method, but the screen shows a white background with the message Loading... and nothing more.
I tried by computer and after 1% I received an error informing that the image file is corrupted. Then, i tried another download site but the error was the same.
Any idea?
Thanks

Just to add more information.. I tried one more TMOUS ROM: RUU_Leo_1_5_TMOUS_2.13.531.1_Radio_15.39.50.07U_2.10.50.26_Signed_LEO_Ship same result, white screen with the word Loading... and nothing more.
I tried also two more ROM's:
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship and
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Both with the same result. After press the power button to start the updating it begins the updating and failed on the first step.
Any idea?
Thanks.

flash from sd card >
http://forum.xda-developers.com/showthread.php?t=681317
if TMOUS rom does not flash try energy custom rom (such as one in my signature) and see if that does.

All these tries was made by Sd Card...
And with your Energy ROM.. the same thing. only white screen with a blue word "Loading..." and nothing more happen.
another tries?
Thanks

Besides trying another smaller sd card such as 2gb or 4gb & making sure nbh file in root of card & trying vis usb flash on a couple of computers you running short on options.
You could also try flashing just radio rom image & see what happens !

Please kindly help
Hello everyone.
I brick my htc hd2 leo english version in an attemp to change it to android but for some reasons it did not work on my device, I want to go back to the stock rom but i have search google including this forum for the stock rom but all i get is a dead links..
Please if anyone knows a working link to download the rom, should kindly post it here.
Thanks in advance.

working links >
http://forum.xda-developers.com/wiki/HTC_HD2#Official_ROMs_.26_Radios