Please help
if u have magdlr 1.10 download magdlr 1.11 turn off phone then press vol down + power if u have 3 colour screen run magdlr 1.11 install
Related
How can I update from Magdlr 1.10 to Magdlr 1.11? Since I no longer have windows mobile installed, I can no longer connect my Hd2 with Windows Mobile Device center and therefore cannot install Magdlr 1.11 using the ROMUpdateUtility.exe.
Thank you.
Just go to hspl bootloader (vol down+power), and then connect to pc and run RUU
Thanks a lot
thx david
now i no need instaling winmo again to instal MAGDLR 1.13
Hello. Have just added HPSL3 and MAGLDR111 on my HD2. But it will not the boot in too the bootscreen. Have tried to hold the power button for a while, but what happens is that only the HTC logo appears. Nothing more happens. Is my cell phone just trash now?
Could this have anything to do with the memory card that's in the phone is formatted to ext2?
^^
hey i had this problem too, try going into the hspl, by holding down the power key and the vol down buttom, then install one of the latest radios i prefer the 2.15.50.14 - you can download them from this site - http://forum.xda-developers.com/showthread.php?t=611787
after this you should be able to get into magldr btw you should try and get the newest magldr - 1.12 get it from the win7 thread - http://forum.xda-
developers.com/showthread.php?t=912416
Can someone please help. I went to the sticky thread to get all info to install android
http://forum.xda-developers.com/showthread.php?t=893948
My system information is:
ROM Version 3.14.531.1
Radio Version 2.15.50.14
I started with loading HSPL on my phone being my radio is 2.15.50.14 which is a requirement for HSPL4. When I install HSPL I connect my phone via sync and the computer detects it and runs through the install. It even shows the "We Hacked It" screen on my phone as its supposed to but when I hold volume down and the power button my phone doesn't show HSPL 2.08, I only see SPL-2.10.0000 8G XE
When I tried to continue loading Magldr from there I get an error and I can't go any farther. Can someone please help, how do I get HSPL to actually load which will allow me to load Magldr.
Thanks
O
What error do you get?
Try manually going into bootloader by holding down the Volume Down button and then powering on phone (still holding volume down).
Then plug in USB and load up MAGLDR DFT flasher.
Thanks TheATHEiST
However I can't get to the bootloader page. I corrected my previous post when I hold the volume button and power button down I get the four color screen that only shows the SPL version I have. I don't know why the HSPL flash doesn't work.
how can i update from magdlr 1.11 to magdlr 1.13
- download the current magldr 1.13 on the pc
- connect your device to your pc
- reboot your device and boot to the tricolor screen (press volume down, before the device starts)
- run ROMUpdateUtility.exe
use exactly the same method you did to install ver 1.11
Unless you have enabled the Last28MB of nand, then magldr wont update it will wipe device and start over (afaik). Some roms ask you to enable it so you will need to backup first either nand or apps/date.
yiyo said:
how can i update from magdlr 1.11 to magdlr 1.13
Click to expand...
Click to collapse
Hi,
The easiest way is to use THIS TOOL (Don't forget to thank him)
You can do it without losing ROM and data
after following this
http://forum.xda-developers.com/showthread.php?t=905060
the HD2 now displays HTC on startup and stays there..
Step that broke it after doing this :
Flash MAGLDR
Download MAGLDR 1.13 (606 KB)
Enter SPL by holding VOL DOWN key while booting the phone. (Make sure you have HSPL.)
Run ROMUpdateUtility.exe to flash MAGLDR 1.13 (magldr.nbh).
Before the procedure , i aslo updated HSPL using this
http://www.xda-developers.com/windows-mobile/hspl3-released-for-hd2/
pam prararamm
3ukman2 said:
after following this
http://forum.xda-developers.com/showthread.php?t=905060
the HD2 now displays HTC on startup and stays there..
Step that broke it after doing this :
Flash MAGLDR
Download MAGLDR 1.13 (606 KB)
Enter SPL by holding VOL DOWN key while booting the phone. (Make sure you have HSPL.)
Run ROMUpdateUtility.exe to flash MAGLDR 1.13 (magldr.nbh).
Before the procedure , i aslo updated HSPL using this
http://www.xda-developers.com/windows-mobile/hspl3-released-for-hd2/
pam prararamm
Click to expand...
Click to collapse
How long did you wait. Sense roms take awhile to bootup. Give it about 15-20 min
Sent from my HD2 using Tapatalk
10507 said:
How long did you wait. Sense roms take awhile to bootup. Give it about 15-20 min
Sent from my HD2 using Tapatalk
Click to expand...
Click to collapse
It won't boot even after 20 mins.
What else can i try ?
have you made proper nand partition?
mutil said:
have you made proper nand partition?
Click to expand...
Click to collapse
No, from unbricked I installed HSPL and then started following this guide , but now not starting up after I ran ROMUpdateUtility.exe .
Tried:
========
1. Installing Original HTC ROM from their site: the windows application cannot talk to the phone.
2. Running again ROMUpdateUtility.exe : again cannot talk to the device over USB to load "whatever is loading". Just freezed on 0% with HTC logo in black background.
Guide I was following:
=================
Installation Guide for MAGLDR 1.13:
Flash MAGLDR
Download MAGLDR 1.13 (606 KB)
Enter SPL by holding VOL DOWN key while booting the phone. (Make sure you have HSPL.)
Run ROMUpdateUtility.exe to flash MAGLDR 1.13 (magldr.nbh).
Flash ClockworkMod Recovery
Download MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip (5.0 MB)
Enter MAGLDR 1.13 by holding power key while booting the phone, and then select "USB Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
Run DAF.exe to flash ClockworkMod Recovery 3.2.0.0 (recovery_3.2.0.0_leo.img).
Flash Android ROM
Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).
Flash NexusHD2-Gingerbread_V3.0_NAND_(Android-2.3.5).zip (85.04 MB)
Flash by to Stock WM ROM.
Find your stock rom, according to your version of HD2 ( Euro or tmobile ). Extract the .exe file to get to the .nbh. Then you must rename the image to "LEOIMG.nbh", since this is the only recognized file name the bootloader will accept. (note: Some people are reporting that the file name must be capitalized, or it will not work. When named exactly as above, it has always worked for me!)
Place the LEOIMG.nbh on a 8GB or smaller microSD card.
Remove the battery cover and press the Reset button.
Hold the Volume Down and End Call (power) buttons at the same time.
As soon as "Searching..." appears on the screen, release the Volume Down button.
ROM will flash. Be sure to hard-reset afterwards to prevent weird errors (as usual).
Remember, the above method will get your phone back to STOCK WM ROM. From there you can retry to install MAGLDR or cLK.
10507 said:
Flash by to Stock WM ROM.
Find your stock rom, according to your version of HD2 ( Euro or tmobile ). Extract the .exe file to get to the .nbh. Then you must rename the image to "LEOIMG.nbh", since this is the only recognized file name the bootloader will accept. (note: Some people are reporting that the file name must be capitalized, or it will not work. When named exactly as above, it has always worked for me!)
Place the LEOIMG.nbh on a 8GB or smaller microSD card.
Remove the battery cover and press the Reset button.
Hold the Volume Down and End Call (power) buttons at the same time.
As soon as "Searching..." appears on the screen, release the Volume Down button.
ROM will flash. Be sure to hard-reset afterwards to prevent weird errors (as usual).
Remember, the above method will get your phone back to STOCK WM ROM. From there you can retry to install MAGLDR or cLK.
Click to expand...
Click to collapse
Hey,
It will not display "searching" when I power it on holding Volume Down and End Call.
Instead it the four colour background ( red , green , blue , white )and reads "Serial" at the white band.
The info in the red band reads:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch 0x40
It is the Euro HD2 phone and I copied to the SD the ROM from htc.com
ROM Version:
Norway: 3.14.409.2, Spain: 3.14.412.2, Portugal: 3.14.410.2, France: 3.14.406.2, Sweden: 3.14.413.2, English: 3.14.405.2