Database Users

After MAGLDR 1.13 doesn't boot!

Hi
after i flashed my HD2 with MAGLDR, it doesnt boot anymore!!!
Can some one help me? I cannot connect it to my laptop to flash ist again. Is there a way to get directly in the USB-modus?
Help me please!!!

Jigsaw8989 said:
Hi
after i flashed my HD2 with MAGLDR, it doesnt boot anymore!!!
Can some one help me? I cannot connect it to my laptop to flash ist again. Is there a way to get directly in the USB-modus?
Help me please!!!
Click to expand...
Click to collapse
did you use HSPL before it ??

i flashed it several times before with HSpl but this is the first time it went worg is there something i can do?

Jigsaw8989 said:
i flashed it several times before with HSpl but this is the first time it went worg is there something i can do?
Click to expand...
Click to collapse
do you have HardSPL 2.08 ??? because in magldr thread it is written as required

1. Wrong section -> There's a Magldr topic, search for it.
2. First read, then act?
Have you installed a rom yet? Does the phone boot to Magldr? A little more info is useful..
Booting into bootloader via: turn on the phone, hold volume down key while booting
Booting into Magldr: turn on the phone and keep the power button pressed down untill Magldr comes up.

Not sure...
Its possilbe that i didn´t update it to 2.08. I think i have got 1.42 but im not sure. If I only could connect my phone to my laptop...

Jigsaw8989 said:
Its possilbe that i didn´t update it to 2.08. I think i have got 1.42 but im not sure. If I only could connect my phone to my laptop...
Click to expand...
Click to collapse
Can you get to 3 color screen where it writes hspl version etc. ?? if yes try to install HSPL 2.08 and then the magldr

I have got 1.42. (i think that the problem! Im able to get in the boot loader but not to MAGLDR . I dont hava a NAND version of andird on my phone but i have got a Windows moble rom on it. Is there a possiblity to bot the WM throgh the bootloader that would be all i need!

im able to get in the bootloader (3 colourd screen) but how should I be able to install a new HSPL without a connection to my Mobile device center?

Do it within this way:
1. Make sure you have HSPL 2.08 installed
2. Install TASK29. If you need it search for this.
3. Install "RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe" on your device. Do some settings within Windows and SHUTDOWN!!!
4. Press VOL-Down and press POWER ON until you will see the flash boot screen.
5. Now install MAGLDR 1.13 (v. 250MB Edition)
6. IF THIS FAILS - install Windows AGAIN and after all install MAGLDR 1.13 WITHOUT Task29.
Yesterday I have done a complete reset. Installed my O2 firmware and replaced my original bootblock. After all I have had the same problem that MAGLDR won't install on this device. I have tried it with 1.12 and 1.13. NOTHING, device boot until the WHITE HTC logo and nothing more. But ANDROID was installed bevore.
After that procedure I was able to flash MAGLDR 1.13 again.

thanks for your help imm try to do anything you have told me! I flashed HSPL 2.08 and Magldr also started. Thankl so much for your Help. Now i will try to install DiserZ andrid rom!

How is it possible to boot windows with MAGLDR? and how is it possible to remove MAGLDR?

If you want boot WINDOWS ONLY: you don't need MAGLDR.
If you want to delete MAGLDR: just use Task29 ROM.
If you want restore all to default:
1. Download your ORIGINAL ROM from your Provider or HTC.
2. Use 7zip and unpack the EXE file.
3. Search the file "RUU_signed.nbh" and rename it to "leoimg.nbh".
4. Format your SD Card with FAT32 format
5. Copy the "leoimg.nbh" to the SDCARD.
6. Insert Card into your device.
Now search the RESET button right next to the SDCARD slot on the back of your device:
7. Press the RESET button AND VOL-Down and when you see within the display "LOADING..." RELEASE both immediately and follow the instructions on the screen. It might be that you need 2 or 3 times until you got it
!!!! EVERYTHING !!! on your device will be erased after all. If you get an error that you are not able to flash "...bla, bla, bla..." don't cry - just download your OFFICIAL ROM by device serial number on the HTC website.
Unpack this EXE (again), rename the *.nb0 file and just do it again.

[Q] htc freezes at startup

Hi,
I have a problem with my HD2, which as I've magdlr geflast, the phone does not go beyond the htc logo
I use
HSPL4
&
Magldr 1.13
I hope you like my help
need more info? just ask: D

bartjuhhbartyow said:
Hi,
I have a problem with my HD2, which as I've magdlr geflast, the phone does not go beyond the htc logo
I use
HSPL4
&
Magldr 1.13
I hope you like my help
need more info? just ask: D
Click to expand...
Click to collapse
MAGLDR doesn't work with HSPL3.03.With HSPL4 you can flash HSPL3.03,HSPL2.08,etc...So,if you want to use MAGLDR you have to flash HSPL2.08.I think you have flashed HSPL3.03.So,run again HSPL4 and select HSPL2.08.

[Solved] Problem flashing Android on HD2

Hey guys,
currently I´m trying to flash Android NAND on a HD2.
Apparently there are some problems with the bootloader.
I tried two different ways, which are explained in this thread:
http://forum.xda-developers.com/showthread.php?t=905060
First I tried to install MAGLDR 1.13. Here is the problem that MAGLDR 1.13 seems not to be properly installed because the phone wont boot in the MAGLDR bootloader. It just hangs at the green/white HTC bootscreen.
As second method I tried to flash cLK 1.4. Here the bootloader seems to be installed properly but it´s not possible to install the ClockworkMod Recovery. Every time I start the batch file it hangs on "waiting for device".
Since I tried some things I only can boot into the bootloader and no longer load Windows.
I´ve installed the latest radio (Radio Leo 2.15.50.14) and HSPL (3.03).
Any ideas what I can do know?

when you install magldr it wipes windows off the deivce, you are aware of that?
when you start the device with magldr you need to hold the power off button til you get the menu up then you can use the usb flasher if it is a daf installer or you need to install CWM recovery and install a rom that way
either way windows will no longer be on your device

Yeah I know this. But the problem is that the magldr bootloader is not booting. It hangs on the white HTC screen. Without any other reaction.

matze91 said:
Yeah I know this. But the problem is that the magldr bootloader is not booting. It hangs on the white HTC screen. Without any other reaction.
Click to expand...
Click to collapse
what version of android did you install? you need HSPL 2.08 or it will not work anways
if all you done was install magldr without install anything else it will do exactly as you have described because there is nothing for it to load up

I think you misunderstood me
Normally if magldr was installed correctly I should see a screen like this (http://www.xda-developers.com/wp-content/uploads/2011/02/MAGLDR-boot-menu.jpg), when I boot with hold power button+left arrow key.
But when I press this combination it does not boot to this screen. It just does nothing. And this is why I can´t proceed with any instruction, because I need a working magldr.

matze91 said:
Hey guys,
currently I´m trying to flash Android NAND on a HD2.
Apparently there are some problems with the bootloader.
I tried two different ways, which are explained in this thread:
http://forum.xda-developers.com/showthread.php?t=905060
First I tried to install MAGLDR 1.13. Here is the problem that MAGLDR 1.13 seems not to be properly installed because the phone wont boot in the MAGLDR bootloader. It just hangs at the green/white HTC bootscreen.
As second method I tried to flash cLK 1.4. Here the bootloader seems to be installed properly but it´s not possible to install the ClockworkMod Recovery. Every time I start the batch file it hangs on "waiting for device".
Since I tried some things I only can boot into the bootloader and no longer load Windows.
I´ve installed the latest radio (Radio Leo 2.15.50.14) and HSPL (3.03).
Any ideas what I can do know?
Click to expand...
Click to collapse
I'm new to all this too so bare with me.
I think you may have installed the wrong HSPL. This is from the HSPL thread.
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR
When you installed HSPL you chose the wrong option. Someone more knowlegable will hopefully come along and tell you how to fix it.

After destroying and downgrading of HSPL with an original HTC Win Rom I could install a new HSPL again...
Don´t ask me how I´ve done this, but it worked
So thanks to all!

update magdlr?

how can i update from magdlr 1.11 to magdlr 1.13

- download the current magldr 1.13 on the pc
- connect your device to your pc
- reboot your device and boot to the tricolor screen (press volume down, before the device starts)
- run ROMUpdateUtility.exe

use exactly the same method you did to install ver 1.11

Unless you have enabled the Last28MB of nand, then magldr wont update it will wipe device and start over (afaik). Some roms ask you to enable it so you will need to backup first either nand or apps/date.

yiyo said:
how can i update from magdlr 1.11 to magdlr 1.13
Click to expand...
Click to collapse
Hi,
The easiest way is to use THIS TOOL (Don't forget to thank him)
You can do it without losing ROM and data

[Q] Half Bricked HTC HD2 Leo, How to revive

This phone came to me to upgrade to Win7
I used HSPL and installed 2.08 HSPL OK
But the phone will not connect to active Sync
I tried to flash in Bootloader mode, YET didnt work.
So I Installed Win 6.5 again all ok,
Still tried Win7 again, didnt work and phone cant boot complete again
I used SD card to flash win 6.5 ok, but cant connect to Active Sync
So I did Task 29, but it stops on 4%
Now phone can only stay in hspl 2.08 (I cant put normal 2.08)
Anyway, now phone can only flash to 1% by PC
By SD Card it fails around 4% (on RADIO V2)
Its a LEO (not TMOUS)
Ideas pls

HM you tried to flash WP7 rom using three colour bootloader mode_? you need to install magldr 1.13 first to install WP7 rom. You actually cant flash WP7 rom using phones original bootloader.
If you go to bootloader mod using Vol down and power menu Activesync will not detect your phone but you are still able to flash HSPL 2.08.
You can also perform task 29 using MTTY tool.
I dont recommend you flashing stock rom using SD card as it overwrite HSPL and in latest Shiped roms SPL is updated to version 3.03 which is not compatible with Magldr 1.13.
If you are stuck in HSPL try first to install HSPL 2.08 using HSPL4. You can find hspl4 here in forum just search.
After you installed HSPL2.08 using HSPL4 install Magldr 1.13 go to Services in Magldr Menu and select uselast24MB in NAND. Now you are ready to flash WP7.
Go back to main menu in Magldr and select USB Flasher mode and connect the phone to PC. Run flasher on the pc and flash. After that phone will reset.
Also make sure that your SD card is compatible with WP7 rom. Not all work with Windows Phone 7 Rom. I use sandisk 4gb and it works well.

just remember ANYTIME you flash a stock rom you are going to loose EVERYTHING (Hspl, MAGldr/cLK, CWM, etc) so you have to start from scratch to get anything (aside from winmo 6.x)
good luck