Hi,
I have a problem with my HD2, which as I've magdlr geflast, the phone does not go beyond the htc logo
I use
HSPL4
&
Magldr 1.13
I hope you like my help
need more info? just ask: D
bartjuhhbartyow said:
Hi,
I have a problem with my HD2, which as I've magdlr geflast, the phone does not go beyond the htc logo
I use
HSPL4
&
Magldr 1.13
I hope you like my help
need more info? just ask: D
Click to expand...
Click to collapse
MAGLDR doesn't work with HSPL3.03.With HSPL4 you can flash HSPL3.03,HSPL2.08,etc...So,if you want to use MAGLDR you have to flash HSPL2.08.I think you have flashed HSPL3.03.So,run again HSPL4 and select HSPL2.08.
Related
I ran magldr 1.13 on my hd2 and now its stuck at the stick together screen on boot
Assuming not using DFT method, after installing MAGLDR did u
1-flash CWR recovery partition ?
2-the rom ?
dwayn27 said:
I ran magldr 1.13 on my hd2 and now its stuck at the stick together screen on boot
Click to expand...
Click to collapse
You still see the pink logo then it means you didn't completely flash MAGLDR. Go to the tri-colors bootscreen hook your phone to pc. Unzip MAGLDR 1.13 and run DAF when you see the word "usb" when you hooked it to pc in tri-colors boothscreen.
dwayn27 said:
I ran magldr 1.13 on my hd2 and now its stuck at the stick together screen on boot
Click to expand...
Click to collapse
Do you have a 2.07.50.xx or higher radio?
If not MAGLDR will not boot up.
You also need hspl 2.08, I had same thing yesterday when I got my new phone thought I'd bricked it after 5 minutes of having it
psyCORe said:
Assuming not using DFT method, after installing MAGLDR did u
1-flash CWR recovery partition ?
2-the rom ?
Click to expand...
Click to collapse
i install MAGLDR ,and run it, and now i am stuck in its boot menu...i havent instail any window7 or android, i install first MAGLDR,,and stuck in its screen,,,
i saw the choice of menu always while entering in service menu and then boot setting menu...but could choose yes and no ,,,can anybody solve mine problem please
I have installed spl- 2.08.hspl. then installed maglder1.13 and it will only load into bootloader screen, and htc splash screen. will not load into magldr its an HD2 on at&t. please help
you hold down the power button to get into the magldr menu as per instructions
Won't start magldr unless radio is correct.
flashed correct radio at 12:45 am worked great thanks.
samsamuel said:
Won't start magldr unless radio is correct.
Click to expand...
Click to collapse
Thank you !!!!
Hi
I am not able to boot MAGLDR on my HD2. I installed HSPL2.08 and then MAGLDR 1.13, but after installation MAGLDR menu doesn't appear. Phone sticks showing green HTC on white background. I am unable to load the MAGLDR with power key as well. What could be a problem? Any possible solution? Thank you very much.
Cheers
Darius
Flash correct radio. No need to re flash magldr, its there, waiting for you to get the spl and radio right. Once they are it will boot.
Thanks, it did the trick
The best
samsamuel said:
Flash correct radio. No need to re flash magldr, its there, waiting for you to get the spl and radio right. Once they are it will boot.
Click to expand...
Click to collapse
Thanks a lot dude:cyclops:
Hi guys. Thanks everyone for the wonderful work you all do.
Today I wanted to try for the first time to flash some NAND stuff.
I installed cLK, then I thought it would have been better MAGLDR so i tried to install it just after cLK.
After the installation, the phone just does not show the MAGLDR boot screen. It stucks at the HTC green logo (of course i keep the power button pressed). The previous working WM rom does not boot.
The only solution i found, is to flash again a wimo rom through ruu_update, from the bootloader (i have hspl4), then I can begin again but MAGLDR will anyway not install properly.
Do you have any suggestion? Thanks.
Sounds like yet another case of not having both spl 2.08.hspl AND an android compatible radio. (2.15.50 for example)
as comes up daily, magldr WILL NOT START without both those criteria filled. It will simply hang on the bootscreen.
thanks for the info.
I had Spl 3.03, I understood that MAGLDR would require 2.08 or above. Radio, is exactely the 2.15.50. What should i do now?
wrong, magldr requires 2.08.hspl ONLY. no other will work.
from magldr thread, post 1 line 4......
You need HardSPL 2.08 before installation!
Click to expand...
Click to collapse
Hello
I have a HTC HD2
I wanted to install android onto it.
And so installed HSPL 3.0.300000 from the package HSPL 4.0
After that the phone booted.
I powered it off and installed magldr 1.13
(I know MAgldr only works o HSPL 2.08 but i came to know that afterwards)
Now, I can't even get to the bootloader splash screen.
Pushing power button and volume down does not do anything.
Please help
Thanks.
Try hit reset button and hold the volume down.
and follow how to downgrade HSPL , in section "A1:Install HSPL3" of this GUIDE.
hope it's help.
thamlim said:
and follow how to downgrade HSPL , in section "A1:Install HSPL3" of this GUIDE.
Click to expand...
Click to collapse
but don't forget the warning (since the OP hasnt said what version hd2 he has) that following those instructions on a tmous will brick it....
pulz said:
Hello
I have a HTC HD2
I wanted to install android onto it.
And so installed HSPL 3.0.300000 from the package HSPL 4.0
After that the phone booted.
I powered it off and installed magldr 1.13
(I know MAgldr only works o HSPL 2.08 but i came to know that afterwards)
Now, I can't even get to the bootloader splash screen.
Pushing power button and volume down does not do anything.
Please help
Thanks.
Click to expand...
Click to collapse
try to flash another radio.
good luck