Hello everyone
This is my first post, i usually browse these forums to pick knowledge but im in an hour of need please
I have the orange M5000, (universal or xda exec)
Everything works as it rings when you dial its number, button presses are acknowledged, even screen taps give you beeps!
but neither the screen lights up andneither does it show anything.
is there something i can do please? i must be pressing a button wrong or something!
tried resets etc.
Please could someone help
many thanks
"G"
when you take the battery out and then put it back in and press the power button does the screen show anything?
If not back to the store me thinks.
Anyone else?
JAmes
Hello,
the connector between the screen and mainboard sounds like it is either loose or frayed ( it is a collection of wires and not a ribbon.)
I would contact www.htceurope.com and arrange a repair as the unit should still be under warranty unless it's been noticebly dropped.
Richard
james, i tried the resets also taking the battery out,sadly the problem persisted after this too
richard thanks so much for putting that website forward as i didnt even know it existed
the orange shop i got it from i would never ever visit again, terrible service and nil knowledge.
i have gone through the process on htc's website and will send it for repair tomorrow
thanks so much again!
has anyone else sent anything to htc for warranty work before?
many thanks
"G"
someone just also informed me that the screen is not designed to be turned 360 degrees but only 180 degrees,maybe this is what did it? whatif i turned it around to close it instead ofturning it back the way it came.
oh well, i have printed a tick sheet so willdispatch it tomorrow
thanks so much again for your help.#
G
I recon you wouldnt have noticed you were doing bad if you turned it through the not turnable part.
hope the repair gets it sorted for you
JAmes
thanks james!
me too! i could always walk into another orange shop but theyre only going to probably send it to htc for repair anyway so why not go straight!
thanks all
G
If you plug the unit in to power, is the screen still dark? Did you do a hard reset? If not, do so. You don't have much to lose. If one presses the backlight button and power buttons in a certain sequence, the backlight slider goes to '0' and the screen will appear to be black. If you look at it under strong light you will see that you can make out the icons etc. on the screen. If this is the case, go to settings and backlight and move the sliders up. If you have hard reset the device then this is all moot.
If you plug the unit in to power, is the screen still dark? Did you do a hard reset? If not, do so. You don't have much to lose. If one presses the backlight button and power buttons in a certain sequence, the backlight slider goes to '0' and the screen will appear to be black. If you look at it under strong light you will see that you can make out the icons etc. on the screen. If this is the case, go to settings and backlight and move the sliders up. If you have hard reset the device then this is all moot.
chetccox
thanks for your reply. i tried using the backlight button like you said but nothing. even under light nothing shows up on the screen unfortunately
hopefully htc can fix it for me, fingers crossed!
thanks a lot for replying sir all the best
G
NaughtyLondonBoy said:
someone just also informed me that the screen is not designed to be turned 360 degrees but only 180 degrees,maybe this is what did it? whatif i turned it around to close it instead ofturning it back the way it came.
G
Click to expand...
Click to collapse
Surprisingly enough it is easily done...I have a jasjar that doesn't stop if you try to rotate it further than 180. They have re-designed the hinge / twist bracket with more pronounced ridges on the XDA exec I had in bits to stop this. If in doubt, deny all knowledge, if you've been able to do that without noticing, it's a design flaw IMO.
HTCEurope are actually very good for repairs, you can log in and see the progress of your repair on their site, and compared to some of the other official service agents ( SBE / imate ) they are also reasonably priced if your units is not covered byt warranty eg if you smashed the screen.
Don't ever bother sending a phone back via orange unless it's accidental damage and you have orangecare - they just send it on to HTC so you're only delaying it. The only downside is you have to pay for the postage to send it to them. An upside of using HTC directly though is you can pay for a cosmetic refurb if needed at the same time.
Richard
You are welcome, but sorry you were not able to find a solution. Can you actually turn your screen through 360 degrees? There are mechanical stops to prevent this, but they can of course be broken by force. One turn would probably not damage the wire inside, as I have seen it. More than once however, and you have no doubt broken the connection. Since the screen still beeps, it sounds like the main connection to the lcd is gone. Even with the backlight for the lcd screen completely disconnected the lcd will still show charaters under strong light. Have you actually done a 'hard' reset? This is the one where you hold the two soft keys (with the '-' on them) at the same time you press the reset button on the back of the unit. If you see nothing after this, you definitely need to send it in for repair.
richard thanks will remember to always use htc directly in future too. hopefully they wont charge me for the work, but if they do its probably my own fault, just wish i knew how i broke it lol
chetccox, i understand now how the cable mustve broken inside. this is because i can easily turn the screen through no problem, even in the manual there is no mention of this, there is even NO ADVICE ON HOW TO OPEN OR CLOSE THE SCREEN!
thanks for your input, i tried the hard rest too, nthing on the screen again! oh well, very unfortunate, was really looking forward to this!
i think ill sell this on and get something like the xda3 again. i had a mini s before i gave that to my cousin for his birthday. i never got on with it, too slow for me, im not educated enough to change roms etc etc etc
thanks all
G
Hi Guys
Have been checking the HTC wesbite frantically since last week to see how my pda is getting on with its warranty repair and this is the status it shows.
Timestamp Status
22/02/2006 08:59:36 RECEIVED
01/03/2006 09:00:27 ON-HOLD
what does it mean when it says on-hold?
this is the status of my Xda Exec (SPV M5000 actually) what does that mean please? can anyone help
Many thanks
G
Well, here is what ON-HOLD means!
Is it worth arguing or shall i just pay it and cut my losses? Not once does it say this in the manual anywhere!
Please let me know what you guys think.
Thanks again
G
ENCLOSED
Dear Mr Sood,
Thank you for returning your phone to us.
Unfortunately our technicians have found that the screen has been turned through more than 180 degrees damaging the co-axial cable. As accidental damage is not covered by the warranty this will be a chargeable repair at a cost of £77.40 inclusive of vat and delivery. This may be paid by credit/debit card at our website, www.htceurope.com, using your case number and password. Please let me know if you can’t find either of these.
Payment may also be made by cheque or postal order made payable to HTC Europe Co Ltd, and sent to:
Tim Morvan
HTC Europe
Capella House
Snowdon Drive
Milton Keynes
MK6 1AJ.
Thank you.
Tim Morvan
SubTotal Item Chk
£25.00 A62 Average small repair
£6.87 S27 Courier
£34.00 S29 Labour
LOL only in our country can the labour be more than the actual cost of repair
Theres a box online where i can choose to disagree. DO you think i stand anywhere? i dont mind paying it but when i bought the phone i cooldnt feel anything stopping the screen
Cheers
G
i wouldnt pay the monies... i would argue its a design fault.. search the internet for othe rpeple with same problem.
also point out that nowhere in the documents does it warn you about 360 rotations.
NaughtyLondonBoy said:
SubTotal Item Chk
£25.00 A62 Average small repair
£6.87 S27 Courier
£34.00 S29 Labour
LOL only in our country can the labour be more than the actual cost of repair
Click to expand...
Click to collapse
While it's a shame they are not fixing it under warranty, the quote is reasonable IMO as you can't buy the cable for love nor money, and I've changed one, it's fiddly and took me at least an hour. £25 for the part and 1 hour's labour is fairy snuff, I'd pay it no question if it were me.
NaughtyLondonBoy said:
Theres a box online where i can choose to disagree. DO you think i stand anywhere? i dont mind paying it but when i bought the phone i cooldnt feel anything stopping the screen
Cheers
G
Click to expand...
Click to collapse
You could try - it's not like they'll put the price up for you querying it?
There *are* others who have had the same problem as well.
Richard
Timestamp Status
22/02/2006 08:59:36 RECEIVED
01/03/2006 09:00:27 ON-HOLD
10/03/2006 13:37:11 OFF-HOLD
11/03/2006 11:11:45 REPAIRING
11/03/2006 11:26:00 REPAIRED
LOLOL, took them 15 minutes to do, so that means £140 an hour! nearly as much as what I make {{wishful thinking}} :roll:
I cannot complain, as i t was most probably my fault it broke. I think ill go back to the xda 3 :twisted: very soild phone
Thanks everyone for your help and support.
NaughtyLondonBoy said:
Timestamp Status
22/02/2006 08:59:36 RECEIVED
01/03/2006 09:00:27 ON-HOLD
10/03/2006 13:37:11 OFF-HOLD
11/03/2006 11:11:45 REPAIRING
11/03/2006 11:26:00 REPAIRED
LOLOL, took them 15 minutes to do, so that means £140 an hour! nearly as much as what I make {{wishful thinking}} :roll:
I cannot complain, as i t was most probably my fault it broke. I think ill go back to the xda 3 :twisted: very soild phone
Thanks everyone for your help and support.
Click to expand...
Click to collapse
I dunno about your phone but my QTEK 9000 had a sticker on the screen when it was fresh out of the box. This sticker did state that you cannot turn it more than 180º. Maybe it's just QTEK that took the time to put this sticker.
So I got my TyTN via import back in August and I am experiencing several problems a few months later: the keys on the front intermittently cease working, the handset speaker makes small buzzing sounds when connected to a GSM network, and sometimes the screen washes out white.
1) I'd like to contact HTC USA for support options, does anybody have the number?
2) Also, does anybody know if they have an advanced exchnage option where they send you a refurb (after you give them a credit card number) and don't charge the card as long as they receive the defective unit back in two weeks or so?
The US HTC can not help you, I've already contacted them. You have to send the device to Europe HTC and have the repair done there. They have 2 HTC offices here in Houston TX one is a repair shop and they said they do not have the knowledge or parts to repair the TyTN that I would have to send it to the country from which the phone was purchased. I think this is complete bull. They could get the parts easly and repair or replace my phone, they are just making it harder to get the TyTN fixed hoping you won't bother them. I am having the screen alignment issue and my phone locking ALL THE TIME!!!! but I have not sent it in becuase I can't handle not having my phone for 2 weeks. I sent an email to HTC Europe asking how long and if I could get a replacement since I have been having so many problems and they never responded.
As far as I know they have no lowner or replacemnet program. I suggest you buy a cheap GSM phone and keep it as your back up.
any luck getting your repairs? I am having soe problems and my imei is definitely from UK.
I bought mine from MadMonkeyBoys gadgets and he has been very responsive in providing support. Although I had to wait until I had a new unit to sustain me during tyTN's repair (now I have a Cheetah), David from MMB quickly got me a repair order and I shall send the unit out tomorrow
Hi guys,
I could not find any other "help" section, so I decided to write my problem here. My Diamond 2 has some sort of display problem, device works, same with touchscreen. I can blindly control the phone, but I can't see anything because LCD does not work. I attached a photo of how LCD looks like when it is not in standby (light on). LCD looks fine with light off (in standby/turned off).
Anyone knows what this might be? I don't know how it happened, but not by my direct action. I checked a clock many times that day, and later when I checked the phone I just could not get LCD to work anymore. Just this.
I already e-mailed HTC service for support. I bought the phone from Amazon UK like 3 months ago, so I think warranty is still valid. I just hope they will not cause any problems and repair the phone without any fees. I am just checking here for your expertise on the matter. Maybe there is someone else here with same problem.
Thanks!
* I tried hard reset button
Hi
By pressing the button at the top (to check the clock) so many times the button may have got loose or the the wires connecting the LCD to the motherboard may be loose, I had this problem with my Nokia N85.
Best thing to do is get it repaired under warranty. First, ring or email Amazon and see what they can do. If your unwilling to send it off Carphone Warehouse will do the repair it for you but you have to find the repair centres. They have quite a few so it should be too hard to find.
Also Carphone Warehouse will not charge you as long as you have proof of purchase.
Man.
Is sending the phone to the Carphone Warehouse a good idea? I was just browsing the net and found many complaints about their repair services.
I sent my Nokia N85 for repair and it was ok. But I can see why your asking because I read the same reviews.
You should definiately try Amazon first.
Man.
Once upon a time when I woke up with a bad mood, I threw my phone away to stop the alarm.. Since that moment my I/O button which is on top of the phone (the one you switch the LCD's blacklight on and off) is hard to push.
The 'clicking-system' is (I think) dented in, and from the surface it actually looks like that too. It still works though, but you have to press really hard.
I asked at the local phone shop what my invoice would look like if I have it repaired by them and I found out it would be better to do it myself.
The problem is that although all the parts which are available on internet, this button is really hard to get. I can;t even find it on eBay (maybe I just search the wrong way).
Does anyone know where to get this, and if it hard to solder it (if needed)?
I am located in The Netherlands, so I prefer something that SHIPS to NL.
I found this (https://www.gsm4world.us/htc-touch-...lex-cable-lcd-key-ear-repair-d-02961_405.html) but I don't know if it will do the job.
Thank in advance guys!
Does anyone know?
gsm4world.us has almost full line of parts for the fuze/tp
Sorry I can't be of more use, but some searching on eBay will show that you can get the same part as on GSM4World a bit cheaper:
http://cgi.ebay.co.uk/HTC-TOUCH-PRO...Accessories?hash=item1c0ce8e08a#ht_2173wt_939
Edit: Actually, I'm not convinced that the part you suggested is the one you need. I think you should hold off buying anything until someone can tell you for certain which is best.
Power button
ewaldvk said:
Once upon a time when I woke up with a bad mood, I threw my phone away to stop the alarm.. Since that moment my I/O button which is on top of the phone (the one you switch the LCD's blacklight on and off) is hard to push.
The 'clicking-system' is (I think) dented in, and from the surface it actually looks like that too. It still works though, but you have to press really hard.
I asked at the local phone shop what my invoice would look like if I have it repaired by them and I found out it would be better to do it myself.
The problem is that although all the parts which are available on internet, this button is really hard to get. I can;t even find it on eBay (maybe I just search the wrong way).
Does anyone know where to get this, and if it hard to solder it (if needed)?
I am located in The Netherlands, so I prefer something that SHIPS to NL.
I found this (https://www.gsm4world.us/htc-touch-...lex-cable-lcd-key-ear-repair-d-02961_405.html) but I don't know if it will do the job.
Thank in advance guys!
Click to expand...
Click to collapse
Hi, Recently my Touch pro's motherboard gone dead.
Like yours HTC service center gave me estimate equal of new device so i listed parts to help others.
If your device is still facing the same problem please PM me with problem & picture, it will help us to decide which part you actually need.
The link posted by you is whole switching system, but i believe you just need plastic part of power button
I have a Desire Z (bell) that i got off the forums to use with AT&T.. everything went great, i love the phone.. about 3 weeks ago i went to check the phone after leaving it on the charger while i slept and the screen was grey with black lines. all the lights work, and i could even answer phone calls by judging where the slider was. pressing on the screen gets haptic feedback. The phone did not fall while i was asleep. I actually havent dropped it once since i got it (around april)
So i called HTC and the phone is within its 1 year warranty but they said since its a canadian phone i will have to call that carrier, so i called bell and they said "call HTC. If you dont live in canada we wont help!"
So when i call HTC back they tell me to call futuretel and they will fix it. I call futuretel and they say no because im in america.
So i call HTC back again and tell them it is ridiculous that the phone is still under 1 year warranty FROM THEM and they wont fix it. they are supposed to be getting in touch with futuretel for an exception or something but i am tried of waiting.
Attached are pictures of the phone in its current state. It is running cm7 and i had not flashed anything on it for atleast a month before it messed up.
Has anyone else had this problem or have any ideas over what has caused it? I've looked online to find images of another screen doing this and haven't been able to.
i forgot to mention that i offered to pay for the repairs from HTC since i was not the original buyer. They still said they won't work on it. It's not that i dont want to pay for the repair, I cant find anyone to do it!!
You need to fix the screen, mine broke two times:
-Dropped once, the screen was OK, then broke in my pants
-Dropped it again on the floor and my screen broke a second times
Seriously, repair your screen by yourself, you will save about 100$ just because you don't pay for the technician.
Just follow this tutorial, it's pretty easy.
http://www.youtube.com/watch?v=u-dR8CHEGjY
Then you may want to buy the screen on ebay with the tools for the phone:
http://www.ebay.com/sch/Replacement...&_dmpt=PDA_Accessories&_trksid=p3286.c0.m1538
Good luck!
thanks. i wanted to get a good idea of what needed replaced to see if i could fix it myself. i didn't know if it was the LCD, or the cable ribbon thing or something else. thank you
bfinch said:
thanks. i wanted to get a good idea of what needed replaced to see if i could fix it myself. i didn't know if it was the LCD, or the cable ribbon thing or something else. thank you
Click to expand...
Click to collapse
I cannot garantee it's the LCD, but both times I got those kind of white screen + black lines it was the LCD for me.