Related
I dropped my fone from the second floor to the first - but luckily the corner of the phone stopped it from hurting the floor any more. It hit the corder where the stylus is and now the screen looks a liitle raised from the keyboard. When I turn it on, it only shows me a white screen.
2 Questions:
1 - can I fix it
2 - can I get another one from Cingular (and how)
I know that I do not have protection on my phone since Cingular will not protect phones that cost more than $300 (when if you think about it, those are the phones you need to protect) Does anyone know how I can get another phone from Cingular without paying?
Thanks
mikeysweet said:
I dropped my fone from the second floor to the first - but luckily the corner of the phone stopped it from hurting the floor any more. It hit the corder where the stylus is and now the screen looks a liitle raised from the keyboard. When I turn it on, it only shows me a white screen.
2 Questions:
1 - can I fix it
2 - can I get another one from Cingular (and how)
I know that I do not have protection on my phone since Cingular will not protect phones that cost more than $300 (when if you think about it, those are the phones you need to protect) Does anyone know how I can get another phone from Cingular without paying?
Thanks
Click to expand...
Click to collapse
getting one without paying isnt going to happen, especially since it shows obvious signs of user inlficted damage. you need to start saving up for your next phone purchase.
So Should I go ahead and try to open it up and see if I can fix anything in it?
In my opinion, I think the LCD is broken, or it could be just the connection loose where the LCD connects to the mainboard. Goodluck!
Clem
clemsyn said:
In my opinion, I think the LCD is broken, or it could be just the connection loose where the LCD connects to the mainboard. Goodluck!
Clem
Click to expand...
Click to collapse
there is a place called www.safeware.com where you can insurace your PDA for about 60 bucks a year... check it out
you may get another from ebay for $400
if the screen and motherboard are not broken, try to get Dopod 838 housing assembly, and replace the housing
So I opened up the entire phone and only found that the InfraRed lens broken off. I don't see where else it is broken. I had everything apart except the screen from the face of the phone. I took off the back by taking the screen off of the guide rails.
I made sure the connections between the screen and the board where secure. With the phone completely open, I tried to turn it on and still got a white screen.
When I plug in the power, the orange light doesn't light up.
I think I'm up a certain creek without a paddle.
Here is an update:
I called Cingular and all they could offer me was the number to the manufacturer HTC (877-878-6944)
HTC sends me to their repair center (888-354-2375)
So I am sending my busted phone to them and here is how the process works:
They get your CCard # to have on file. You send the phone in your own package, your cost. They will get it, diagnose the problem and give you an estimate of cost. If you approve the cost, then they will charge your card for the repair plus $27.80 for return shipping. If you do not approve the cost then they will charge you $27.80 and return you your busted phone.
I'll keep you posted to the cost estimate.
10/26/06 - HTC calls me up and says that my unit will cost $169 to repair and I go ahead and authorize it.
10/30/06 - HTC Ships out my unit and I should get it 11/2
Jesus, 169!
wait wait..u mean to tell me there's no warranty on this device? not even a year?
I don't know how HTC works, but I used to own a couple of HP PDA and PDA phones...and if there's any kind of problem, hardware, software, or even if I dropped the device and broke it (which I did a couple of times), I call the warranty department (of course I had to lie and told them I never damanged it), but then they send me a new PDA on UPS Next day right away with no charge to me..and I send them back my old PDA postage paid....
I don't get it..why can't u do the same with HTC? Like I was wondering earlier...is there no warranty? Coz if there isn't, I'm returning my 8125.
And the Saga ends.
Yesterday got my phone and tested everything to make sure it works. Turns out that they actually do fix what you send them instead of just swapping it out. My case was cracked near the corner and you can see where they repaired the crack.
So there you have it.
- There is a warranty for factory defects, not dropping your phone
anthoj said:
I don't get it..why can't u do the same with HTC? Like I was wondering earlier...is there no warranty? Coz if there isn't, I'm returning my 8125.
Click to expand...
Click to collapse
There is a 1 year warranty through Cingular but it does not cover lose or physical damage, only defects in the product.
My touchscreen developed some issues after about 3 months of use. It was replaced under warranty.
If you drop and break it your warranty is voided. This is pretty standard, insurance covers loss & accidental damage.
my first for ages.
I recently purchased a wizard which looks to be virtually brand new.
now the other day I updated it the the o2 uk latest rom as it was running a really old rom.
and it has been running perfectly, i have not looked into running any other rom or performance upgrades etc.
now I was using the device in landscape and after closing the unit my screen went bright white and my pride and joy is now not usable.
I can still acept calls, the touch screen still works but the screen is pure white.
Ive contact a few places and they all say the screen has died and needs replacing
Does this sound right.
its a £80 fix if this is right. im so gutted.
any advice is great before i pack it up and send it off.
anyone please....
Can you put it into bootloader mode? If not i would say you have a loose connection on the screen to the mainboard i had the same problem with my old phone the screen disconnected for the main board so no display! If you cant get it replaced take it apart and carefully check the connections if still doesnt work i would try another screen or buy one.
even when i reset it, it stays whits so cant see anyhting on screen,
ive had someone take it apart and re-seat the cables and still just a white screen
so im off to purchase another one in hope this is all thats gone
as your phone is booting up press and hold the camera button, is the screen still white?
cant tell now. ive sent if off for repair.
Im gutted.
bleep said:
cant tell now. ive sent if off for repair.
Im gutted.
Click to expand...
Click to collapse
I had a similar issue, the keyboard sliding in and out must have worn out the switch that detects when it is open/closed. I had had my wizard a year and the screen started flickering, i dealt with it for a while, then the scree was stuck blank white unless if i pressed on the area of the phone that had the contact.
I had to send it back and got a refurb.
sounds like thats what happened to you too. Hopefully when you get it back it will be good as new
ive sent mine for a screen replacement tho not a repair.
now im worrying that its gonna come back in the same state.
Gulp
got my wizard back after having the screen replaced.
2 days later when ever i touch the bottom of the screen with pen, finger or even breath on it.
the screen goes off and the phone locks up and dies.
I have to take battery out and restart it and it then works great till i touch the bottom again.
Sound like a dodgy screen or something else.
Seems like a flexi strip(The one conecying the display to the mother board) sometimes if the strip develops a tear or is not properly connected this issue usually happens.
the shop doing the repair have said there is the following issues
1- padding issue on the screen (either too much or not enough)
2- Problems with the main board. (something on there is failling, hardware wise)
How the hell could this be happening on a device that was working perfectly
apart from the screen had died.
have they done more damage attempting the repair... I think so .!
I had the white screen 6 months ago. Luckily still under warranty period so got it repaired. It was the flexo-cable. since the fix no problem so far despites using the phone (also in landscape mode) daily.
when i got it back after the screen was replaced my xda worked great but as stated as soon as some preasure was applied to the bottom of the screen it would just die there and then.
I would have to take the battery out and then it would power on as normal
but again if i put presure on the bottom of the screen.. bang DEAD !
so sent it back to them and they told me what I stated above !
now waiting 2wks to hear what they are gonna do about it
not a happy bunny
still nothing back from the company thats doing the repair.
i dont know why they do this.
Im now thinking of getting my Xda back, selling it either on here or ebay and purchasing a new one.
Should i quit now or wait out for the miracle that they fix it completly.
Anyone in the uk reconmend a good repair company please im pulling my hair out.
http://forum.xda-developers.com/showthread.php?t=303872
theres your answer
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
Hey guys i searched these forums and i searched on google, couldn't find any information. I dropped my phone today from less than 1 foot and it turned off and when i tried turning it on my entire screen was white except for the top which had black lines and you could tell the phone was responsive because of the way the lines moved. What do you guys suggest i do? I can't figure out a way to make my screen work normally.
Your screen is broken, simple as that. Time to get a replacement!
Where exactly do i get one? And what is the part called which i need to replace? My phone doesnt even barely have scratches and my screen stopped working -.-. I hate my life.
FuMMoD said:
Where exactly do i get one? And what is the part called which i need to replace? My phone doesnt even barely have scratches and my screen stopped working -.-. I hate my life.
Click to expand...
Click to collapse
Ummm... T-mobile would be a great place to start... Just tell them it stopped working. Unless you bought it off warranty or without insurance, then you can buy it or any part for it where ever you can find it.
Yeah, no warrenty on it. What is the part called though i have no idea what the screen part is called so i can order the part.
bump. anyone?
You might need an LCD replacement part for the G1 if it is damaged... Other possibles could be the ribbon cable somehow got dislodged/damaged so you're not getting an image. Can you still make calls from it?
Yes it receives calls, its just the screen. would this be the replacement? http://cgi.ebay.com/OEM-LCD-Screen-...ries?hash=item43994d9bc5&_trksid=p3286.c0.m14
bumping for help
I have a serious problem. I noticed a bug in the Desire alphas where sometimes when the backlight went off during a call it would not come back on when the i took the phone away from my face. It always came back on eventually.
Ok now yesterday I flash alpha 8 and it worked fine. Now all of a sudden I reboot my phone bc the battery dies and the backlight won't come on at all! I know the phone is on because the haptic feedback and cap buttons are on and if I leave it on I can tell it's getting notifications.
How am I supposed to fix this?! I can't even see anything to get into recovery! My phone is unusable.
Find out every step to do a backup in recovery... see if that works
BlackHawk6 said:
Find out every step to do a backup in recovery... see if that works
Click to expand...
Click to collapse
Load into bootloader
Press power button once and wait about 20 seconds
press volume down once then hit power button once
Wait about a minute and move the trackball down slowly 3 time and press it
Scroll it down once and press it four times
trevorwhopkins said:
I have a serious problem. I noticed a bug in the Desire alphas where sometimes when the backlight went off during a call it would not come back on when the i took the phone away from my face. It always came back on eventually.
Ok now yesterday I flash alpha 8 and it worked fine. Now all of a sudden I reboot my phone bc the battery dies and the backlight won't come on at all! I know the phone is on because the haptic feedback and cap buttons are on and if I leave it on I can tell it's getting notifications.
How am I supposed to fix this?! I can't even see anything to get into recovery! My phone is unusable.
Click to expand...
Click to collapse
Unless your screen is broken you can always boot into recovery.
Take out the battery, then put it back in.
Hold the trackball down as you power on, this will boot you into fast boot.
Select bootloader, then select recovery. and bam your in recovery and can reflash.
I can get my phone into recovery. When I adb in i can push the phone into recovery, then when i hit adb devices it shows my phone and says recovery.
the problem is the backlight is not on even when i am in recovery. i would say the screen broke, but it seemed like a software problem, because it was just slow to come back on. It still always came back on. then I left it in my car chargine and it never came on again. The phone seems to be working fine though.
Kind of off topic, but did your call screen do this before flashing to Desire at all? Did you recently install a screen protector? I had problems with the PhantomSkinz screen protector making the proximity sensor less sensitive and behaved exactly how you're describing...as soon as I took it off it started working again. I'm now using a dcmugen88 screen protector and it works great.
interesting. i have one of those bodyglove or whatever protectors. best buy glued it onto my lcd. i suppose it could have started around that time. but would the proximity sensor still be deactivating the lcd even when its booting up or in recovery?
Oh, I must have overlooked that. The screen protector wouldn't cause any issues on startup or in recovery... guess it must be the rom then.
well, figured it out.
warning to n1 users: watch that lcd screen under the glass. its not nearly as sturdy as the glass cover.
the lcd/digitizer screen under my glass got cracked and stopped working. no drop, no warning, no funny colors. htc does not cover this in the warranty no matter how good the actual phones condition is.
i almost didnt get another n1, a phone thats inherantly weak (i found dozens of similar reports over the web) is not exactly a good case for a system with no insurance, no store to walk into, and very unhelpful support. they try to be very nice, but the rep i talked to couldnt even tell me whats covered and not. he just said let us charge 500 bucks to your card and we will ship a replacement, then decide if we think you have to buy it once we get your old phone. i demanded to talk to someone who did know. his manager denied hearing about lcd screen problems... after the original rep said he and htc knew this was a common problem. google didnt even return my email when i first contacted them saying my backlight was broken.
so again, be careful and get a good case.
trevorwhopkins said:
well, figured it out.
warning to n1 users: watch that lcd screen under the glass. its not nearly as sturdy as the glass cover.
the lcd/digitizer screen under my glass got cracked and stopped working. no drop, no warning, no funny colors. htc does not cover this in the warranty no matter how good the actual phones condition is.
i almost didnt get another n1, a phone thats inherantly weak (i found dozens of similar reports over the web) is not exactly a good case for a system with no insurance, no store to walk into, and very unhelpful support. they try to be very nice, but the rep i talked to couldnt even tell me whats covered and not. he just said let us charge 500 bucks to your card and we will ship a replacement, then decide if we think you have to buy it once we get your old phone. i demanded to talk to someone who did know. his manager denied hearing about lcd screen problems... after the original rep said he and htc knew this was a common problem. google didnt even return my email when i first contacted them saying my backlight was broken.
so again, be careful and get a good case.
Click to expand...
Click to collapse
ive got 5 bux that says the power connector to your lcd came lose so now the screen just doesnt turn on ... i have heard this issue before... send it in and get it fixed if its going to cost you then tell them to **** off and send their phone they just sent you back
Whatever rom you are running ask the developer of rom in his thread. That's where you will get the best information and help.