Not knowing about that (I'm a noob on androind. sorry), I followed darky's gingerbread like rom update method through odin on YouTube.
After that I can't turn on my cell.
I've found some similer articles, but It's not working.
Plaese, Help me.
Try this: http://forum.xda-developers.com/showthread.php?t=867648
You should be able to recover from almost anything, as long as you can get the phone in to download mode. If you can't get it in to download mode, it's a brick.
If you need instructions on how to enter download mode, search is your friend. It's been discussed several times here.
Thanks,
If you don't mind, can you tell me where can find for CSC file?
I can't find that file for VZW
Thank you again.
You shouldn't need any thing but the file from that thread. Download the file, put your phone in download mode, start Odin on your PC, connect the phone to the PC, and flash the file you downloaded with the PDA button. I am assuming you have the drivers for your phone, as you used Odin to break it.
Adrynalyne's all in one .tar should completely restore you phone to stock. You will need to root it again after wards if you want root again.
Yes. I did.
But, Odin fail to update my cell.
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> Sbl.bin
<ID:0/010> cache.rfs
<ID:0/010> factoryfs.rfs
<ID:0/010> movinand.bin
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It's the log from my odin.
And cell's first screen still display GT-I9000.
Please, help me
Just to confirm you downloaded the file from the thread above (rather large file), removed your battery, put your phone in download mode, started odin, flashed the file you downloaded from the forum using the *PDA* option and not the *PHONE* option correct?
Yes I did. but, only the recovery file has a problem. the others(system and Kernel) have no problem.
I followed that article - http://forum.xda-developers.com/showthread.php?t=782204
Well download it again to make sure that it's not corrupted. And try again.
Your phone should be fine. Either that or try the CWMrecovery from the ClockworkMod/Rom Manager thread.
Next time... Please do not flash anything that is not specifically labeled as DI01 or DJ05.
Also, can you get into Recovery?
Because if you can, you should wipe and flash a DJ05 Rom.
I trid to flash System, Kernel and Recovery. But, System and kernel worked well.
Only when I try to flash "Recovery", Odin failed.
Odin only shows this message.
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> recovery.bin
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cannot find what's wrong.
Image has correct volume and size. I don't think It's corrupted.
RacerXFD said:
Well download it again to make sure that it's not corrupted. And try again.
Click to expand...
Click to collapse
Just wanted to second this. The time i had that log in odin it was a corrupted download. Downloaded again and i was good to go.
Good luck.
You will be fine.
Sent from my stupidfast fascinate through xda app.
geejunlee said:
Yes I did. but, only the recovery file has a problem. the others(system and Kernel) have no problem.
I followed that article - http://forum.xda-developers.com/showthread.php?t=782204
Click to expand...
Click to collapse
Follow this:
http://forum.xda-developers.com/showthread.php?t=867648
It's one file as opposed to 6
Sent from my SCH-I500 using XDA App
Related
Help whenever i try to repartition my samsung fascinate via odin with "Stock-i500-vzw-pit.pit" it fails. Here is the log:
====
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
====
Any ideas why? or possibly its a bad pit. I got it from a public dropbox, seems to be the same one everyone links to.
You are not supposed to re-partition... Unless you are building your own software on your phone and are going to build Android from scratch for yourself, I don't recommend it.
EDIT: Oh, I know what you did... Did you watch the Gingerbread video on how to get your Galaxy S Phone?
That doesn't apply to Samsung Fascinate or any other Galaxy S... The Fascinate is the i500 and not compatible with GSM models. I don't know what to tell you if you did it. I just got done trying to help another guy get his right... It wouldn't flash...
no, i was messing around with voodoo5 kernel but i did stay with 2.1 i flashed stock kernel over voodoo without any prep work
All the pit files floating around for the Verizon i500 are the wrong size, I have attached the correct one here.
http://forum.xda-developers.com/attachment.php?attachmentid=514802&stc=1&d=1297408166
After flashing to full stock with Odin, if the phone stays or on a blank screen or recovery loop try this other flashing program called Heimdall in which you can select the components of the .tar archive and exlude the MoviNAND.bin file if that's failing in Odin.
Make sure you read the Readme.txt file carefully because you have to install special drivers for this to work.
http://www.glassechidna.com.au/products/heimdall/
If it unbricked your phone consider some donation to the dev... great work
Also, here's the full stock DL09 file.
http://adrynalyne.us/files/stuff/
Enjoy!
BillA
Hello guys,
I am trying to install CWM recovery. As you certainly know the easiest way is by flashing the file via Odin.
Thing is I'm having a hard time trying to do what might look easy at first glance.
When opening Odin 3.09 as administrator, it is able to recognize my rooted 9505 (I'm on Samsung stock firmware) whenever I'm in download mode, but after selecting the corresponding CWM file and clicking Start, I get the following:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I tried flashing the PIT partition file for my phone model, but I also get this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I tried flashing the files independently and both at the same time. It always failed.
What can i do? I really don't know what else should be done to fix this.
I'm getting
Secure Check Fail: apnhlos
when I try to flash any PDA-compatible file in Odin.
What does that even mean? Android sure has some of the most cryptic error messages I have ever seen.
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
squabbi said:
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Which version is that? Can you provide a link?
Alphadan said:
Which version is that? Can you provide a link?
Click to expand...
Click to collapse
Oh my bad. I was mistaking it for another program.
The version I used to root my pho e was Odin 3.07
http://samsung-updates.com/Odin307.zip
Also I presume you have the Samsung usb drivers installed?
Sent from my HTC One using Tapatalk 4
Don't forget to exit, or better yet uninstall, Kies... This can affect flashing too...
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Butterfly11 said:
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Click to expand...
Click to collapse
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Same probleme here
Alphadan said:
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Click to expand...
Click to collapse
Same problem here, the only difference is I was just doing a firmware update via Odin and something went wrong (I don't know what). The phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" but Kies is not recognizing the phone.
Please help!
I have Galaxy S4 (i9505). Custom ROM, rooted (Flashed by Odin).
Then i tried to flash recovery TWRP. Found my version of TWRP recovery on official site, downloaded an install for odin.
Then tried to flash and THIS happened - FAIL. I started to panic, tried to start again, and it's failed again, because PIT wasn't found
<ID:0/009> Get PIT for mapping..
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!!
After that I didn't know really what to do. and tried to flash firmware stock, but it has same result. No PIT.
So then i found the PIT file from reading the forum, and downloaded it for my i9505, and flash it with and without firmware stock. That's the log:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> Removed!!
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Added!
It seems like phone every time disconnects while PIT is flashing. Even Re-Partition is checked on.
Sorry for my english, if I said something grammatically wrong. Please help!
did you try with a other cable, cuz it looks like the phone disconnect (Like you said).
Follow this http://forum.xda-developers.com/showthread.php?p=41072377
Sent from my SAMSUNG-SGH-I727
jd1639 said:
Follow this http://forum.xda-developers.com/showthread.php?p=41072377
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Thx i will try it!
THANK YOU SO MUCH!
I did it! I have uninstall my KIES from computer with Samsung driver.
Then i downloaded one of firmware stock from that link, it was 4 file installation in Odin. Restarted my computer and then tried to flash it.
It works! Thank you for my unbricked phone
Here's the Odin log.
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was trying to unlock my phone before this, before I gave up because I had downloaded the wrong version (5.0.1 UK stock instead of 4.2.2 stock, was trying to use the leaked unlock codes) and then I tried flashing TWRP 3.0.2-0 in Odin 3.10-7 which "Re-Partition" was ticked automatically for some reason and I didn't know. Now my phone is soft-bricked and Odin won't cooperate. Help me please!
I will provide more info as necessary!
Jared20098 said:
Here's the Odin log.
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was trying to unlock my phone before this, before I gave up because I had downloaded the wrong version (5.0.1 UK stock instead of 4.2.2 stock, was trying to use the leaked unlock codes) and then I tried flashing TWRP 3.0.2-0 in Odin 3.10-7 which "Re-Partition" was ticked automatically for some reason and I didn't know. Now my phone is soft-bricked and Odin won't cooperate. Help me please!
I will provide more info as necessary!
Click to expand...
Click to collapse
Flash a stock rom with .pit file and re-partition checked. Flash a Lollipop rom.
Lennyz1988 said:
Flash a stock rom with .pit file and re-partition checked. Flash a Lollipop rom.
Click to expand...
Click to collapse
Unfortunately that's gonna take a while due to my internet being reeeaaally crappy. It takes 3-4 hrs on average to download a 1.5 GB file.
Try changing the USB ports.I had the same problem like you 1 mouth ago and tried changing from the front USB ports to the back and it worked.
simeon112 said:
Try changing the USB ports.I had the same problem like you 1 mouth ago and tried changing from the front USB ports to the back and it worked.
Click to expand...
Click to collapse
This is an old thread but gotta say LIFE SAVER.
Was flashing pit files left right and center, a simple switch to a USB 2.0 port fixed it. Thanks
Tweakforce_LG said:
This is an old thread but gotta say LIFE SAVER.
Was flashing pit files left right and center, a simple switch to a USB 2.0 port fixed it. Thanks
Click to expand...
Click to collapse
what da heck is a PIT files and where do I get this
Pit files contain partition information about a particular Samsung phone.
Older thread with good information: https://forum.xda-developers.com/showthread.php?t=999097
Israelleite said:
what da heck is a PIT files and where do I get this
Click to expand...
Click to collapse
^^^^
audit13 said:
Pit files contain partition information about a particular Samsung phone.
Older thread with good information: https://forum.xda-developers.com/showthread.php?t=999097
Click to expand...
Click to collapse
ok, so i tried rooting and it totally screwed up my phone...
i tried unrooting by installing stock firmware through odin, and this is the error i got.
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
make sure your phone is in download mode. once your in download mode plug in your phone into a usb connection to your computer. make sure to also use the stock odin that you can find on xda and you can also just download the firmware
HTML:
http://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-stock-sm-g930a-ph1-odin-files-t3458890
load up all the 3 files normally and it will wipe the phone off completely to stock.
normally if the ids don't match that means the firwmare you downloaded is not the correct version for your handset.
Looks like you're either putting old firmware on or incorrect firmware.
Which model S7 do you have and which firmware are you installing?