Help whenever i try to repartition my samsung fascinate via odin with "Stock-i500-vzw-pit.pit" it fails. Here is the log:
====
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
====
Any ideas why? or possibly its a bad pit. I got it from a public dropbox, seems to be the same one everyone links to.
You are not supposed to re-partition... Unless you are building your own software on your phone and are going to build Android from scratch for yourself, I don't recommend it.
EDIT: Oh, I know what you did... Did you watch the Gingerbread video on how to get your Galaxy S Phone?
That doesn't apply to Samsung Fascinate or any other Galaxy S... The Fascinate is the i500 and not compatible with GSM models. I don't know what to tell you if you did it. I just got done trying to help another guy get his right... It wouldn't flash...
no, i was messing around with voodoo5 kernel but i did stay with 2.1 i flashed stock kernel over voodoo without any prep work
All the pit files floating around for the Verizon i500 are the wrong size, I have attached the correct one here.
http://forum.xda-developers.com/attachment.php?attachmentid=514802&stc=1&d=1297408166
After flashing to full stock with Odin, if the phone stays or on a blank screen or recovery loop try this other flashing program called Heimdall in which you can select the components of the .tar archive and exlude the MoviNAND.bin file if that's failing in Odin.
Make sure you read the Readme.txt file carefully because you have to install special drivers for this to work.
http://www.glassechidna.com.au/products/heimdall/
If it unbricked your phone consider some donation to the dev... great work
Also, here's the full stock DL09 file.
http://adrynalyne.us/files/stuff/
Enjoy!
BillA
Related
Not knowing about that (I'm a noob on androind. sorry), I followed darky's gingerbread like rom update method through odin on YouTube.
After that I can't turn on my cell.
I've found some similer articles, but It's not working.
Plaese, Help me.
Try this: http://forum.xda-developers.com/showthread.php?t=867648
You should be able to recover from almost anything, as long as you can get the phone in to download mode. If you can't get it in to download mode, it's a brick.
If you need instructions on how to enter download mode, search is your friend. It's been discussed several times here.
Thanks,
If you don't mind, can you tell me where can find for CSC file?
I can't find that file for VZW
Thank you again.
You shouldn't need any thing but the file from that thread. Download the file, put your phone in download mode, start Odin on your PC, connect the phone to the PC, and flash the file you downloaded with the PDA button. I am assuming you have the drivers for your phone, as you used Odin to break it.
Adrynalyne's all in one .tar should completely restore you phone to stock. You will need to root it again after wards if you want root again.
Yes. I did.
But, Odin fail to update my cell.
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> Sbl.bin
<ID:0/010> cache.rfs
<ID:0/010> factoryfs.rfs
<ID:0/010> movinand.bin
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It's the log from my odin.
And cell's first screen still display GT-I9000.
Please, help me
Just to confirm you downloaded the file from the thread above (rather large file), removed your battery, put your phone in download mode, started odin, flashed the file you downloaded from the forum using the *PDA* option and not the *PHONE* option correct?
Yes I did. but, only the recovery file has a problem. the others(system and Kernel) have no problem.
I followed that article - http://forum.xda-developers.com/showthread.php?t=782204
Well download it again to make sure that it's not corrupted. And try again.
Your phone should be fine. Either that or try the CWMrecovery from the ClockworkMod/Rom Manager thread.
Next time... Please do not flash anything that is not specifically labeled as DI01 or DJ05.
Also, can you get into Recovery?
Because if you can, you should wipe and flash a DJ05 Rom.
I trid to flash System, Kernel and Recovery. But, System and kernel worked well.
Only when I try to flash "Recovery", Odin failed.
Odin only shows this message.
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> recovery.bin
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cannot find what's wrong.
Image has correct volume and size. I don't think It's corrupted.
RacerXFD said:
Well download it again to make sure that it's not corrupted. And try again.
Click to expand...
Click to collapse
Just wanted to second this. The time i had that log in odin it was a corrupted download. Downloaded again and i was good to go.
Good luck.
You will be fine.
Sent from my stupidfast fascinate through xda app.
geejunlee said:
Yes I did. but, only the recovery file has a problem. the others(system and Kernel) have no problem.
I followed that article - http://forum.xda-developers.com/showthread.php?t=782204
Click to expand...
Click to collapse
Follow this:
http://forum.xda-developers.com/showthread.php?t=867648
It's one file as opposed to 6
Sent from my SCH-I500 using XDA App
sorry for my bad english.
i have the problem, when i flash a software (annyone) i get this failure on
my Galaxy Tab P1000:
Recovery mode not work also
<ID:0/023> Added!!
<ID:0/023> Odin v.3 engine (ID:23)..
<ID:0/023> File analysis..
<ID:0/023> SetupConnection..
<ID:0/023> Initialzation..
<ID:0/023> Set PIT file..
<ID:0/023> DO NOT TURN OFF TARGET!!
<ID:0/023> Get PIT for mapping..
<ID:0/023> Firmware update start..
<ID:0/023> zImage
<ID:0/023> boot.bin
<ID:0/023> cache.rfs
<ID:0/023> factoryfs.rfs
<ID:0/023> hidden.rfs
<ID:0/023> modem.bin
<ID:0/023>
<ID:0/023> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me
How does this relate to development? This should be in QA or general. Mods please move.
Sent from my MoDaCo powered Galaxy Tab.
This comes up a lot. You didn't put your tab in download mode.
What were you trying to flash and what ROM did you have beforehand? The Odin results you post look like what you get if you have tried to flash an un-signed ROM onto a Tab with signed bootloaders.
I had JMF then i flashed Modaco Kernel ext4 and then i flashed roto v4 upgrade
Reindl8 said:
I had JMF then i flashed Modaco Kernel ext4 and then i flashed roto v4 upgrade
Click to expand...
Click to collapse
Hmmm. I don't really like suggesting this but you may have to flash JM6 complete with bootloaders, PIT file and repartition selected to bring your Tab back to life. This will leave you with the horrible signed bootloaders but you can get rid of them with the app from Chainfire / Rotohammer and then you'll be free to flash any kernel you want. Be very careful flashing bootloaders as if that flash fails you could end up with a 'hard brick', please don't blame me if you choose to follow my advice and your device dies.....!
Well I just had my phone replaced today due to a bad proximity sensor. I got home and decided to update it to EB18 with root from this thread. Well Odin crashed on me. I tried again and selected Odin3 1.61, selected the pit and tar, selected repartition (per instructions) and clicked start. I let it sit for 30 minutes and still no response. This is the response from Odin and the phone is in download mode with no blue progress bar. Odin is recognizing the phone when I connect it to the computer.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
Click to expand...
Click to collapse
The 1 + power button puts me in download mode. Whenever I just press the power button I see an icon that is a cell phone + caution + computer. I've tried two different cables (one even worked 100% on my old phone), different USB ports and different computers. I tried the stock tar/pit and even the Samsung update app for 2.2. I still cannot Odin this phone successfully. Anyone have any other ideas?
Try Odin again, as long as you can get into Download Mode, you are NOT bricked.
Be sure to follow EXACT instructions.
If it was bricked it wouldn't turn.on at all. Its like that cause it doesn't have anything to.boot up. Try downloading the tar file again.
Sent From My Evo Killer!
Well you guys must have brought me some luck. I tried Odin1.7 and it seems to be successfully flashing DI18 rom. *crosses fingers*
Edit: After hours of trying it finally flashed successfully to DI18 but will not flash to any other version (EB13 Extended will just sit at "Set PIT file..").
Are you using a pit file? Of it flashed to di18 and wont to eb13 then try redownloading the tar file. Might be a bad download
Sent From My Evo Killer!
musclehead84 said:
Are you using a pit file? Of it flashed to di18 and wont to eb13 then try redownloading the tar file. Might be a bad download
Sent From My Evo Killer!
Click to expand...
Click to collapse
Yep I'm using the .pit that was included with the EB13 Extended archive. I followed the instructions and checked Re-Partition and then it sits at:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
Click to expand...
Click to collapse
If I use other stock roms (EB13, DI18, DK28) I will used s1_odin_20100512.pit or victory_8G_100528.pit and follow instructions and NOT click Re-Partition and I get
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-DI18-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> param.lfs
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Another odd thing is if the phone is turned off and I connect it to the USB cable, it will boot into the Android system recovery (2e) automatically.
I'm at a loss on why this will not flash. I had zero problems with my last phone (other than the stupid proximity sensor) and this replacement phone just wants to fight me.
Don't use the pit file when trying for the regular eb13 file. Sometimes the pit file causes mine to fail so I quit using them. Try that once.
Sent From My Evo Killer!
Still no go. Keeps failing at params.lfs. I've tried 2 computers, 3 different usb cables, multiple usb ports. I don't know what to do.
Re-Partition checked = Sits at Set Pit File and then nothing.
Re-partition unchecked and with or without pit file = automatic failure.
I spent the last few hours and $35 replacing this phone for nothing.
I appreciate the advice though.
Well I finally got EB13 installed. I pulled out an old netbook and installed the Samsung drivers.
1. Started up Odin3 1.61
2. Removed battery from phone
3. Connected USB cable to phone
4. Connected USB cable to netbook
5. Power + 1
6. Added s1_odin_20100512.pit
7. Added SPH-D700-EB13-8GB-REL.tar.md5
Funky but I finally have a working Epic 4G. I ain't even going to try to root this bastard.
I believe EB13 extended is already rooted.
Mugen678 said:
I believe EB13 extended is already rooted.
Click to expand...
Click to collapse
I opted to go for the stock EB13 instead of the extended.
Hello guys,
I am trying to install CWM recovery. As you certainly know the easiest way is by flashing the file via Odin.
Thing is I'm having a hard time trying to do what might look easy at first glance.
When opening Odin 3.09 as administrator, it is able to recognize my rooted 9505 (I'm on Samsung stock firmware) whenever I'm in download mode, but after selecting the corresponding CWM file and clicking Start, I get the following:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I tried flashing the PIT partition file for my phone model, but I also get this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I tried flashing the files independently and both at the same time. It always failed.
What can i do? I really don't know what else should be done to fix this.
I'm getting
Secure Check Fail: apnhlos
when I try to flash any PDA-compatible file in Odin.
What does that even mean? Android sure has some of the most cryptic error messages I have ever seen.
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
squabbi said:
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Which version is that? Can you provide a link?
Alphadan said:
Which version is that? Can you provide a link?
Click to expand...
Click to collapse
Oh my bad. I was mistaking it for another program.
The version I used to root my pho e was Odin 3.07
http://samsung-updates.com/Odin307.zip
Also I presume you have the Samsung usb drivers installed?
Sent from my HTC One using Tapatalk 4
Don't forget to exit, or better yet uninstall, Kies... This can affect flashing too...
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Butterfly11 said:
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Click to expand...
Click to collapse
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Same probleme here
Alphadan said:
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Click to expand...
Click to collapse
Same problem here, the only difference is I was just doing a firmware update via Odin and something went wrong (I don't know what). The phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" but Kies is not recognizing the phone.
Please help!
hi I messed up too I went to install a new rom but I had to flash a new twrp recovery and I flashed the wrong one and I cant boot in to recovery no more and then I tried to put the right twrp recovery back on there and it gave me a odin error {no pit partition} so I downloaded the sm-g935f pit file and tried to use the pit tab and got a new odin error {Complete(Write) operation failed} iv tried different usb ports 2.0 and 3.0 and tried different cables I need help someone please save me phone
Hi,
download a stock firmware from updato. In Odin select all of the files. For CSC file use the normal CSC file (not HOME_CSC).
In addition, select re-partition and flash.
Odin gets the PIT information from the CSC file.
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ok so I tried that and still this keeps coming up I read something about that the phone is in read only mode do it cant write anything to it not even odin I flashed the wrong twrp it wasn't for my international phone and now I cant do anything with it it don't even have a recovery on it now please help and thank you for the idea tho but didn't work
I tried it again and this is coming up now
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
and now this I don't know why this is going on its killing me
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1
tried the new odin and this happened
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
Have you downloaded the correct firmware from updato.com? If you have g935f you need a 'f' version of the firmware.
Sorry, I have no further idea.
flash again and use your country home CSC i did that and works like a charm
I have downloaded the g935f and the uk csc BTU and still not working
Maybe you try a different usb cable and flash on another pc?
ive tried everything the phone has put itself in read only mode I need to know how to do a boot trap install or something if anyone know how to do that
Have you tried with re partition and NAND erase all ticked in odin? If not, try it. And please use latest version of odin. 3.11 or above.
ya ive tried everything I can think of it just cant get pass the pit file check an then my phone restart to the galaxy s7 edge screen an says on that I flashed twrp-3.0.2-0-hero2qltechn.img and it was that, that messed my phone up coz it was the wrong one I was ment to flash twrp-3.0.2-4-hero2lte.img and then I went to flash the the right one it said the I didn't have a pit partition so I tried the latest firmware for my phone (UK EVR an the pit files) I also used just the csc files but everything ive tried has gave me the above errors ive ready messed up this time
You can download the .pit file for your device: HERE
thank you joku1981 but I already have one but ill try this one
can someone tell me how to use the pit file tab bit coz I still cant get it to work still all the above odin errors
hi
have u fixed ur peoblem i have same
Did u try a restore to factory firmware with smartswitch? With ur IMEI and SN maybe it works