sorry for my bad english.
i have the problem, when i flash a software (annyone) i get this failure on
my Galaxy Tab P1000:
Recovery mode not work also
<ID:0/023> Added!!
<ID:0/023> Odin v.3 engine (ID:23)..
<ID:0/023> File analysis..
<ID:0/023> SetupConnection..
<ID:0/023> Initialzation..
<ID:0/023> Set PIT file..
<ID:0/023> DO NOT TURN OFF TARGET!!
<ID:0/023> Get PIT for mapping..
<ID:0/023> Firmware update start..
<ID:0/023> zImage
<ID:0/023> boot.bin
<ID:0/023> cache.rfs
<ID:0/023> factoryfs.rfs
<ID:0/023> hidden.rfs
<ID:0/023> modem.bin
<ID:0/023>
<ID:0/023> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me
How does this relate to development? This should be in QA or general. Mods please move.
Sent from my MoDaCo powered Galaxy Tab.
This comes up a lot. You didn't put your tab in download mode.
What were you trying to flash and what ROM did you have beforehand? The Odin results you post look like what you get if you have tried to flash an un-signed ROM onto a Tab with signed bootloaders.
I had JMF then i flashed Modaco Kernel ext4 and then i flashed roto v4 upgrade
Reindl8 said:
I had JMF then i flashed Modaco Kernel ext4 and then i flashed roto v4 upgrade
Click to expand...
Click to collapse
Hmmm. I don't really like suggesting this but you may have to flash JM6 complete with bootloaders, PIT file and repartition selected to bring your Tab back to life. This will leave you with the horrible signed bootloaders but you can get rid of them with the app from Chainfire / Rotohammer and then you'll be free to flash any kernel you want. Be very careful flashing bootloaders as if that flash fails you could end up with a 'hard brick', please don't blame me if you choose to follow my advice and your device dies.....!
Related
Recently I flashed files to my phone in odin using the phone button and now every time i try to install a rom using odin it always stops at recovery.bin here is the code:
<ID:0/012> Checking MD5 finished Sucessfully..
<ID:0/012> Leave CS..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> cache.rfs
<ID:0/012> dbdata.rfs
<ID:0/012> factoryfs.rfs
<ID:0/012> modem.bin
<ID:0/012> recovery.bin
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried various roms like DL09, DI01 package 3. There is only one rom i can get through called T959TLJL3 i dont even know if thats the right name but when it finishes it reboots and goes to the galaxy s logo and then shuts down. Does any one know how to fix this or is it bricked?
Yours is for the verizon fascinate correct?
Edit: Also to confirm if you have verizon fascinate (some first posters actually have different phones), did you remove the battery, hold the down volume button and then inserted the usb cord?
i do have the verizon fascinate and when i tried the roms i did exactly what you said i got the yellow triangle with the text downloading... below it
i tried it again and i got this from odin
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> Enter CS for MD5..
<ID:0/012> Check MD5.. Do not unplug the cable..
<ID:0/012> Please wait..
<ID:0/012> Checking MD5 finished Sucessfully..
<ID:0/012> Leave CS..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> Sbl.bin
<ID:0/012> cache.rfs
<ID:0/012> factoryfs.rfs
<ID:0/012> movinand.bin
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Two big problem after carefully reading is you flashed a telus rom onto your fascinate. Telus =/= verizon. Also you never should use the phone button, only the pda.
When you say roms, are you trying to flash the full .tar package? Post the link of the "rom" you tried to flash.
If you mean the full package, use the steps below:
1. Uninstall the samsung driver and reinstall it (make sure you have the correct version, 32bit or 64bit)
-File is in first post if you need it: http://forum.xda-developers.com/showthread.php?t=948722
2. Get the EB01 file here: http://www.droidforums.net/forum/sa...roms-w-root-new-clockwork-updated-2-11-a.html
-Get the full stock froyo leak + root + froyo clockworkmod. (If this works, you can flash other eb01 roms using CWM.)
3. Redo the steps I said above using of removing battery and etc.
-And try odin again.
did you say that you used the phone button? ....if you did= BAD!! Use PDA only in odin
PDA only friend there is your problem. Check the forums there should be steps to get you back to stock so you can start again.
Sent from my SCH-I500 using XDA App
I have been using PDA but i accidentally clicked PHONE the first time I tried to flash a rom. I tried EB01_DXC.tar.md5 and i got this.
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> cache.rfs
<ID:0/012> dbdata.rfs
<ID:0/012> zImage
<ID:0/012> recovery.bin
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried CWMrecovery.tar and it stops at recovery.bin also.
If you used the phone button I think it's too late to just try flashing one of these packages in Odin because your phone is now messed up pretty good. I do believe you can get things back to normal (because others have done this and recovered) but I don't know how. Try searching or waiting for someone more learned on the subject to hopefully drop in here. Good luck.
Sent from my SCH-I500 using XDA App
Not only does it seem you used the wrong button (PDA, phone) , you also seemed to try to flash something that belongs on a different phone (telus). Your best bet is to go on the IRC and get help as most people there know a lot.
obviously the wrong button as everyone in the world will tell you, and has......i can say i have heard of simply flashing a new modem in odin correctly....pda button! seems to have fixed some peoples button miscues. I hope this works for you.
I finally got it to work i just followed this guide. http://forum.xda-developers.com/showthread.php?t=977493 Thanks to everyone for trying to help.
My phone is soft bricked i think, it can go to download mode but cant flash anything. Tried to flash stock rom, Odin says "There is no PIT Partition". I tried to flash the PIT File for my phone but it also says
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010>
<ID:0/010> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me!
U need the PIT file for G7102
Search the forum for G7102 PIT file
Hey Guys,
I am having an issue installing a pit file via Odin 3.10. Regular AP (ROM Firmware) flash normally and pass. So it cannot be a driver, or cable issues... I need to re-partition my G900T in order to completely wipe the phone. It is having issues with the stock rom (randomly resetting itself).
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I got the pit file from a well reputed XDA Thread. So I do not think it is corrupted or nothing like that.
http://forum.xda-developers.com/showthread.php?t=2737448 #2
Please help me solve my problem.
Thread closed.
Please continue in your original thread where you are already being helped.
http://forum.xda-developers.com/showthread.php?t=3224904
Thank you.
The_Merovingian
Forum Moderator
Here's the Odin log.
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was trying to unlock my phone before this, before I gave up because I had downloaded the wrong version (5.0.1 UK stock instead of 4.2.2 stock, was trying to use the leaked unlock codes) and then I tried flashing TWRP 3.0.2-0 in Odin 3.10-7 which "Re-Partition" was ticked automatically for some reason and I didn't know. Now my phone is soft-bricked and Odin won't cooperate. Help me please!
I will provide more info as necessary!
Jared20098 said:
Here's the Odin log.
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was trying to unlock my phone before this, before I gave up because I had downloaded the wrong version (5.0.1 UK stock instead of 4.2.2 stock, was trying to use the leaked unlock codes) and then I tried flashing TWRP 3.0.2-0 in Odin 3.10-7 which "Re-Partition" was ticked automatically for some reason and I didn't know. Now my phone is soft-bricked and Odin won't cooperate. Help me please!
I will provide more info as necessary!
Click to expand...
Click to collapse
Flash a stock rom with .pit file and re-partition checked. Flash a Lollipop rom.
Lennyz1988 said:
Flash a stock rom with .pit file and re-partition checked. Flash a Lollipop rom.
Click to expand...
Click to collapse
Unfortunately that's gonna take a while due to my internet being reeeaaally crappy. It takes 3-4 hrs on average to download a 1.5 GB file.
Try changing the USB ports.I had the same problem like you 1 mouth ago and tried changing from the front USB ports to the back and it worked.
simeon112 said:
Try changing the USB ports.I had the same problem like you 1 mouth ago and tried changing from the front USB ports to the back and it worked.
Click to expand...
Click to collapse
This is an old thread but gotta say LIFE SAVER.
Was flashing pit files left right and center, a simple switch to a USB 2.0 port fixed it. Thanks
Tweakforce_LG said:
This is an old thread but gotta say LIFE SAVER.
Was flashing pit files left right and center, a simple switch to a USB 2.0 port fixed it. Thanks
Click to expand...
Click to collapse
what da heck is a PIT files and where do I get this
Pit files contain partition information about a particular Samsung phone.
Older thread with good information: https://forum.xda-developers.com/showthread.php?t=999097
Israelleite said:
what da heck is a PIT files and where do I get this
Click to expand...
Click to collapse
^^^^
audit13 said:
Pit files contain partition information about a particular Samsung phone.
Older thread with good information: https://forum.xda-developers.com/showthread.php?t=999097
Click to expand...
Click to collapse
hi I messed up too I went to install a new rom but I had to flash a new twrp recovery and I flashed the wrong one and I cant boot in to recovery no more and then I tried to put the right twrp recovery back on there and it gave me a odin error {no pit partition} so I downloaded the sm-g935f pit file and tried to use the pit tab and got a new odin error {Complete(Write) operation failed} iv tried different usb ports 2.0 and 3.0 and tried different cables I need help someone please save me phone
Hi,
download a stock firmware from updato. In Odin select all of the files. For CSC file use the normal CSC file (not HOME_CSC).
In addition, select re-partition and flash.
Odin gets the PIT information from the CSC file.
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ok so I tried that and still this keeps coming up I read something about that the phone is in read only mode do it cant write anything to it not even odin I flashed the wrong twrp it wasn't for my international phone and now I cant do anything with it it don't even have a recovery on it now please help and thank you for the idea tho but didn't work
I tried it again and this is coming up now
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
and now this I don't know why this is going on its killing me
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1
tried the new odin and this happened
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
Have you downloaded the correct firmware from updato.com? If you have g935f you need a 'f' version of the firmware.
Sorry, I have no further idea.
flash again and use your country home CSC i did that and works like a charm
I have downloaded the g935f and the uk csc BTU and still not working
Maybe you try a different usb cable and flash on another pc?
ive tried everything the phone has put itself in read only mode I need to know how to do a boot trap install or something if anyone know how to do that
Have you tried with re partition and NAND erase all ticked in odin? If not, try it. And please use latest version of odin. 3.11 or above.
ya ive tried everything I can think of it just cant get pass the pit file check an then my phone restart to the galaxy s7 edge screen an says on that I flashed twrp-3.0.2-0-hero2qltechn.img and it was that, that messed my phone up coz it was the wrong one I was ment to flash twrp-3.0.2-4-hero2lte.img and then I went to flash the the right one it said the I didn't have a pit partition so I tried the latest firmware for my phone (UK EVR an the pit files) I also used just the csc files but everything ive tried has gave me the above errors ive ready messed up this time
You can download the .pit file for your device: HERE
thank you joku1981 but I already have one but ill try this one
can someone tell me how to use the pit file tab bit coz I still cant get it to work still all the above odin errors
hi
have u fixed ur peoblem i have same
Did u try a restore to factory firmware with smartswitch? With ur IMEI and SN maybe it works