Hey Guys,
I am having an issue installing a pit file via Odin 3.10. Regular AP (ROM Firmware) flash normally and pass. So it cannot be a driver, or cable issues... I need to re-partition my G900T in order to completely wipe the phone. It is having issues with the stock rom (randomly resetting itself).
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I got the pit file from a well reputed XDA Thread. So I do not think it is corrupted or nothing like that.
http://forum.xda-developers.com/showthread.php?t=2737448 #2
Please help me solve my problem.
Thread closed.
Please continue in your original thread where you are already being helped.
http://forum.xda-developers.com/showthread.php?t=3224904
Thank you.
The_Merovingian
Forum Moderator
Related
Help plss. I was caught in a boot loop and unable to enter TWRP recovery mode. I tried to flash the stock ROM but got an error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/B]
<ID:0/003> Removed!!
<ID:0/003> Added!!
Please help!
Mee1122 said:
Help plss. I was caught in a boot loop and unable to enter TWRP recovery mode. I tried to flash the stock ROM but got an error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/B]
<ID:0/003> Removed!!
<ID:0/003> Added!!
Please help!
Click to expand...
Click to collapse
Hi,
Post your problem HERE
Why were you trying to re-partition?
malybru said:
Hi,
Post your problem HERE
Why were you trying to re-partition?
Click to expand...
Click to collapse
I just saw it in an article saying I should do that when unrooting or unbricking my phone. Is it not the proper procedure? im kinda new with android.
Mee1122 said:
I just saw it in an article saying I should do that when unrooting or unbricking my phone. Is it not the proper procedure? im kinda new with android.
Click to expand...
Click to collapse
Hi,
Post in the thread I gave you.
They will tell you what to do.
malybru said:
Hi,
Post in the thread I gave you.
They will tell you what to do.
Click to expand...
Click to collapse
Thanks for taking time to reply. I actually solved my problem with reading a lot here. I just plugged the usb cable at the back of my computer and it worked! now i have a new question and i justed posted it in the link you gave me. Thanks again!
Hi
I tried to re-partition my Samsung S3 mini with a custom pit file with Odin v3.07. This is Odin output, looks ok:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
I'd like to remove the recovery partition and resize following system partition instead. The download menu on the device prints a red warning "Custom pit file", which I ignore.
After rebooting the device, I can't see any change, the recovery image still boots and the red flag in the download mode disappeared.
Why does it not work, I tried already different checkbox combinations on Odin.
Regards
Edit:
The problem was, that I tried to repartition the device without flashing the images. Instead of Odin, Heimdall throws an error.
I tried to flash a stock ROM and got an error in ODIN that said:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now my phone only boots into Odin Mode and to a screen that says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Please Help!
Odin stock Rom tar and start from scratch.
carwashman said:
Odin stock Rom tar and start from scratch.
Click to expand...
Click to collapse
I tried multiple Stock ROMs and I get the same error. Do you know of a legit one? The ones I had could've been corrupt.
What device do you have?
carwashman said:
What device do you have?
Click to expand...
Click to collapse
The Sprint Samsung Galaxy S4. SPH-L720
You may have to try the kitkat rom.
http://forum.xda-developers.com/showthread.php?t=2663619
This is the one I used recently. I was already on NAE
carwashman said:
http://forum.xda-developers.com/showthread.php?t=2663619
This is the one I used recently. I was already on NAE
Click to expand...
Click to collapse
Is there a way to find out what I'm on without being able to elsewhere except download?
EDIT: I get the same error with that ROM.
EDIT #2: I got it to work!!! Thanks so much guys!
Hey, i'm in trouble again. I should stay stock and do nothing to my phone, anyway, that's what was in my mind when i flashed a stock 5.0 firmware from Russia ( i'm from romania ) . Now wi-fi wouldn't switch on and mobile network doesn't work. ANYWAY, i tried flashing several modems, but i end up everytime with a "fail" error in odin, there is the log.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
my baseband : is XXUHOD4.
Oh, help me fix this please, i won't do any changes to my phone, everytime i'm doing something "bad" i spending hours to repair it and end up posting a thread there, it's frustrating i mean that was supposed to take 10 min to flash the ROM and then i could go to sleep but i spent 3 hours, everytime happening the same time. Hope you get why i'm so frustrated, anyway, appreciate the help
Try another usb cable and port. And try a different Odin version. 3.09 worked fine for me every time.
GDReaper said:
Try another usb cable and port. And try a different Odin version. 3.09 worked fine for me every time.
Click to expand...
Click to collapse
I have like 3 other usb cables but they don't work properly, i can use them only to charge the phone. I flashed the ROM with the same usb cable that i'm using now and it works well. Thanks for reply.
try a different USB port
wowempire said:
Hey, i'm in trouble again. I should stay stock and do nothing to my phone, anyway, that's what was in my mind when i flashed a stock 5.0 firmware from Russia ( i'm from romania ) . Now wi-fi wouldn't switch on and mobile network doesn't work. ANYWAY, i tried flashing several modems, but i end up everytime with a "fail" error in odin, there is the log.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
my baseband : is XXUHOD4.
Oh, help me fix this please, i won't do any changes to my phone, everytime i'm doing something "bad" i spending hours to repair it and end up posting a thread there, it's frustrating i mean that was supposed to take 10 min to flash the ROM and then i could go to sleep but i spent 3 hours, everytime happening the same time. Hope you get why i'm so frustrated, anyway, appreciate the help
Click to expand...
Click to collapse
try flashing a custom kernel via recovery
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I have a problem
Hi Guys.
How can I solve this?
Where can I download the right PIT file?
My S8 is bricked.
doktor20 said:
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I have a problem
Hi Guys.
How can I solve this?
Where can I download the right PIT file?
My S8 is bricked.
Click to expand...
Click to collapse
The PIT is set in the csc part of the firmware. Flash firmware again with all 4 files
doktor20 said:
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I have a problem
Hi Guys.
How can I solve this?
Where can I download the right PIT file?
My S8 is bricked.
Click to expand...
Click to collapse
I accidently did a nandroid erase of the system once on my s8 and left it bricked for 2 and a half hours. I recovered from flashing all 4 files from the FW (U1 fw to be exact) and enabled re-partition. It successfully went through and i got out of my bricking problem.