Hi
I tried to re-partition my Samsung S3 mini with a custom pit file with Odin v3.07. This is Odin output, looks ok:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
I'd like to remove the recovery partition and resize following system partition instead. The download menu on the device prints a red warning "Custom pit file", which I ignore.
After rebooting the device, I can't see any change, the recovery image still boots and the red flag in the download mode disappeared.
Why does it not work, I tried already different checkbox combinations on Odin.
Regards
Edit:
The problem was, that I tried to repartition the device without flashing the images. Instead of Odin, Heimdall throws an error.
Related
Good day.
Yesterday I made some crap with my phone . Now I need a "low level " firmware for my GT - I9515
The PIT file is totally destroyed . In the recovery mode, I 'm no longer pure . The device has no system . Only the download mode works .
Maybe someone can help me . Otherwise, I have a 200 € paperweight .
The Engschlische language sponsored by Google . : D
Okay , I have recorded a progress . The Pit file could be installed . Look here:
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Now do not want the system . I've got only one file . Why it does not work , I state in a log file of Odin .
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
I tried a pit file called JFVELTE_EUR_OPEN.pit
and changed to (direct) usb port and then it worked. (found this link)
http://forum.xda-developers.com/showthread.php?t=2265477
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Odin is failing when it tries to flash aboot.mbn because the bootloader on the phone is newer than the bootloader in the rom you are trying to flash.
Hi
I have a Galaxy S5 G900A, I tried to Root it but I forgot to put it to debugging Before, and it went into the brick.
I tried to burn him again 5 Android version of AT & TFirmware, but it failed.
I tried to burn it to the full original version of .4.4.2 Firmware includes all the files BL CSC CP and AP, But Odin writes failed.
Samsung Kies files to Recognize it
It has nothing to do?
Wait, Debugging mode you mean Download Mode?
You can try This Method For Unbricking.
Go to Sammobile and download the lastest stock rom, download chainfire and put PA on odin and flash it on Download Mode.
What version of Android was your phone on?
The ATT version of the S5 has a locked/encrypted bootloader, and if you already had lollipop, you can't downgrade to 4.4.2.
You can only flash the most current 5.x roms in ODIN if your phone already has 5.x
Was Installed Android 5.0
I tried to just a Root it at first but I forgot to bring the situation Dibging, then it became bruck
Currently unable to install the Android File AP 5. course in download mode.
Where can I get the full Framework 5 and G900A Android?
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> persist.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I wanted to root my phone tonight and thought I was doing everything right, well my phone rebooted and wouldn't connect to my carrier or anything and was checking device status the entire time..
So I decided to reboot and now I am just even more confused.. my phone at the current state is relooping into the recover reboot stage.. so I can't put the phone in USB debugging or anything like some post suggest..
I can get it to download mode but every time I try odin it fails and fails.. I have tried everything to my ability to get this phone to reboot on stock and I just cant seem to figure it out..
I am not to knowledgeable about ROM's and rooting and such and I learned my lesson.
When on the download screen is says at the bottom in red text " SW REV CHECK FAIL : [aboot] Fused 4 > Binary 2
This is the error code I get from Odin when trying to flash back to oem android on my S7 EDGE
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am more then open to any suggestions I just want my phone back lol
Answer, apparently I was using v4 bootloader, thought I was on most recent, but I wasn't. Had a hard time finding newer/current firmwares for my device, but was able to find v5, flashed and went perfectly
So I'm trying to reset my phone as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks
Hi,
My phone is stuck on twrp loading screen. Reboot again lands on the same screen.
I even tried flashing the stock rom(sammobile) via odin but fails everytime
Here is the log:
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4245 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the Downloading screen:
Odin mode
download speed: fast
system status: official
FRP lock: off
After the stock rom fail via odin, this mesg appears:
KERNAL REV. CHECK FAIL, DEVICE: 5, BINARY: 0
I tried various solutions but nothing seems to work. Please help me!
use correct restore and correct usb cable, oh and another rom
SonyXperiaS said:
Hi,
My phone is stuck on twrp loading screen. Reboot again lands on the same screen.
I even tried flashing the stock rom(sammobile) via odin but fails everytime
Here is the log:
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4245 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the Downloading screen:
Odin mode
download speed: fast
system status: official
FRP lock: off
After the stock rom fail via odin, this mesg appears:
KERNAL REV. CHECK FAIL, DEVICE: 5, BINARY: 0
I tried various solutions but nothing seems to work. Please help me!
Click to expand...
Click to collapse
Same problem here, did you fix it?
Use the correct bootloader binary, the one you trying to flash is lower then currently installed on your phone.
Try flashing with the version 5 binary roms as displayed in your download mode.