Galaxy s8 PIT PROBLEM - Samsung Galaxy S8 Questions and Answers

<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I have a problem
Hi Guys.
How can I solve this?
Where can I download the right PIT file?
My S8 is bricked.

doktor20 said:
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I have a problem
Hi Guys.
How can I solve this?
Where can I download the right PIT file?
My S8 is bricked.
Click to expand...
Click to collapse
The PIT is set in the csc part of the firmware. Flash firmware again with all 4 files

doktor20 said:
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I have a problem
Hi Guys.
How can I solve this?
Where can I download the right PIT file?
My S8 is bricked.
Click to expand...
Click to collapse
I accidently did a nandroid erase of the system once on my s8 and left it bricked for 2 and a half hours. I recovered from flashing all 4 files from the FW (U1 fw to be exact) and enabled re-partition. It successfully went through and i got out of my bricking problem.

Related

Flashing fail in odin v1.85

This is the log of my odin flashing stock rom for galaxy y
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Use another odin file and next time please create these threads in Q/A section
gaurav9822 said:
This is the log of my odin flashing stock rom for galaxy y
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Disable antivirus before open odin .
If don't work . Disable antivirus then reboot pc then open odin.
If still don't unistall antivirus.
Sent from my GT-S5360 using Tapatalk 2

Odin fails when i try to revert to stock rom. S7 EDGE ATT(SM-G935A)

So basicly I rooted my phone like 3 days ago so yesterday since it was going slow and all. I was trying to revert from rooted 6.0.1 to stock 6.0.1 but I have literaly tried so much stock roms for att on the internet and it failed from model dismatch. But then I found one that matched and odin passed till it failed at system.img.ext4. Here is the log:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And there is an error on the phone:
SW REV CHECK FAIL : [system]Fused 3 > Binary 1
Please help me I just got this one from insurance and if my dad finds out I broke it. I'm going to be toast!!!!
TheAndroidGuy101 said:
So basicly I rooted my phone like 3 days ago so yesterday since it was going slow and all. I was trying to revert from rooted 6.0.1 to stock 6.0.1 but I have literaly tried so much stock roms for att on the internet and it failed from model dismatch. But then I found one that matched and odin passed till it failed at system.img.ext4. Here is the log:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And there is an error on the phone:
SW REV CHECK FAIL : [system]Fused 3 > Binary 1
Please help me I just got this one from insurance and if my dad finds out I broke it. I'm going to be toast!!!!
Click to expand...
Click to collapse
Same issue here, I think you need to find a more recent version of the file - which I can't find at the moment
did you not make a back up before rooting your phone , either on your phone or smart switch so that you can revert to stock rom if needed.
all threads advise backing before flashing in case some thing like this happens.
theandroidguy101 said:
so basicly i rooted my phone like 3 days ago so yesterday since it was going slow and all. I was trying to revert from rooted 6.0.1 to stock 6.0.1 but i have literaly tried so much stock roms for att on the internet and it failed from model dismatch. But then i found one that matched and odin passed till it failed at system.img.ext4. Here is the log:
<id:0/003> odin engine v(id:3.1203)..
<id:0/003> file analysis..
<id:0/003> setupconnection..
<id:0/003> initialzation..
<id:0/003> set pit file..
<id:0/003> do not turn off target!!
<id:0/003> get pit for mapping..
<id:0/003> firmware update start..
<id:0/003> singledownload.
<id:0/003> boot.img
<id:0/003> recovery.img
<id:0/003> system.img.ext4
<id:0/003> fail! (auth)
<id:0/003>
<id:0/003> complete(write) operation failed.
<osm> all threads completed. (succeed 0 / failed 1)
and there is an error on the phone:
Sw rev check fail : [system]fused 3 > binary 1
please help me i just got this one from insurance and if my dad finds out i broke it. I'm going to be toast!!!!
Click to expand...
Click to collapse
pm me! I just flashed my s7 at&t. I can send you the files

help with sm-g530h/ds firmware and pit file

trying to flash firmware through odin and getting this message.
Searching in google and here I found the pit file for sm-g530h. but no success when trying to flash with it
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please, somebody help me
Please check in Odin that repartition is not ticked

Trying to get Sprint S7 back to stock after trying to flash unlocked firmware.

Hi, I tried following the top thread on flashing my Sprint S7 to the unlocked non bloatware version, not noticing it was out of date. Now I can not get my S7 out of a bootloop, even when trying to flash the Sprint version. Could anyone walk me through the steps to get the sprint firmware back on my device and out of the bootloop? Thanks, Jon.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Failing to flash stock on ODIN

Hey there,
my galaxy s8 went into a bootloop after rooting with TWRP.
Currently on Android 8.0 and the cpu is Exynos.
After using Odin to reflash to stock android it failed numerous times.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5869 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin v3.13.1
marky2458 said:
Hey there,
my galaxy s8 went into a bootloop after rooting with TWRP.
Currently on Android 8.0 and the cpu is Exynos.
After using Odin to reflash to stock android it failed numerous times.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5869 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin v3.13.1
Click to expand...
Click to collapse
Are you using correct firmware for your phone and region or maybe trying to use older version of firmware than what's on your phone.

Categories

Resources