help with sm-g530h/ds firmware and pit file - Galaxy Grand Prime Q&A, Help & Troubleshooting

trying to flash firmware through odin and getting this message.
Searching in google and here I found the pit file for sm-g530h. but no success when trying to flash with it
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please, somebody help me

Please check in Odin that repartition is not ticked

Related

Flashing fail in odin v1.85

This is the log of my odin flashing stock rom for galaxy y
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Use another odin file and next time please create these threads in Q/A section
gaurav9822 said:
This is the log of my odin flashing stock rom for galaxy y
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Disable antivirus before open odin .
If don't work . Disable antivirus then reboot pc then open odin.
If still don't unistall antivirus.
Sent from my GT-S5360 using Tapatalk 2

[Q] help required cant flash via odin ( RESOLVED)

ISSUE RESOLVED NEEDED A GENIUNE CABLE USING A CHEAP CABLE DONT WORK
im on echo rom
my signal is poor so i went to flash a different modem
fnc4 as its a uk based modem
it failed via flashin in odin got the end saying writing failed
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
now im unable to flash any think via odin
tried a full rom
I9505XXUFNC9-OXAFNB8-PRE-ROOTED-KNOX-FREE-ODEX-FULL
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added
my download info are
product name gt i9505
current binary samsung officail
system status custom
knox kenerl lock 0x0
knox warrenty 0x1
csb config lsb 0x30
write protection enable
emmx burst mode enabled
i really need some help with this ive never had this issue before i think i may have semi bricked my device
im unable to get into recovery at the moment wont allow me to flash recovery
any help welcome

Galaxy s8 PIT PROBLEM

<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I have a problem
Hi Guys.
How can I solve this?
Where can I download the right PIT file?
My S8 is bricked.
doktor20 said:
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I have a problem
Hi Guys.
How can I solve this?
Where can I download the right PIT file?
My S8 is bricked.
Click to expand...
Click to collapse
The PIT is set in the csc part of the firmware. Flash firmware again with all 4 files
doktor20 said:
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I have a problem
Hi Guys.
How can I solve this?
Where can I download the right PIT file?
My S8 is bricked.
Click to expand...
Click to collapse
I accidently did a nandroid erase of the system once on my s8 and left it bricked for 2 and a half hours. I recovered from flashing all 4 files from the FW (U1 fw to be exact) and enabled re-partition. It successfully went through and i got out of my bricking problem.

Trying to get Sprint S7 back to stock after trying to flash unlocked firmware.

Hi, I tried following the top thread on flashing my Sprint S7 to the unlocked non bloatware version, not noticing it was out of date. Now I can not get my S7 out of a bootloop, even when trying to flash the Sprint version. Could anyone walk me through the steps to get the sprint firmware back on my device and out of the bootloop? Thanks, Jon.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Failing to flash stock on ODIN

Hey there,
my galaxy s8 went into a bootloop after rooting with TWRP.
Currently on Android 8.0 and the cpu is Exynos.
After using Odin to reflash to stock android it failed numerous times.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5869 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin v3.13.1
marky2458 said:
Hey there,
my galaxy s8 went into a bootloop after rooting with TWRP.
Currently on Android 8.0 and the cpu is Exynos.
After using Odin to reflash to stock android it failed numerous times.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5869 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin v3.13.1
Click to expand...
Click to collapse
Are you using correct firmware for your phone and region or maybe trying to use older version of firmware than what's on your phone.

Categories

Resources