Well I did it. I dropped my phone and the digitizer is ruined. Does anyone know of a good tutorial on how to replace it? I found this after hours of searching, but it is vague at best. I have removed all parts but the the digitizer. I do not want to take a heat gun to it until I know this is the right process.
If anyone can elaborate or confirm I would greatly appreciate the input.
Thank You
PopOne
here
http://www.youtube.com/watch?v=gMI7sNY5YZg
there is an aria but design and hardware are the same(except the optic trackball)
and here
http://www.youtube.com/watch?v=SwomVNUtCm0
Thank you for you post. Very helpful indeed. The phone has now been disassembled and waiting on its new glass.
Do not know why I did not check youtube :S
PopulationOne said:
Thank you for you post. Very helpful indeed. The phone has now been disassembled and waiting on its new glass.
Do not know why I did not check youtube :S
Click to expand...
Click to collapse
Keep us informed of your repair, im very curious how easy it is to replace the parts.
u may not need a heat gun.... i just got it repaired here in india. the mechanic fellow did it really gud.....
Hi guys. I just followed this tutorial and replaced my digitizer. However, I must have disturbed the proximity or light sensor as now my screen blanks when I receive or make a call (as it did before) but now I can't re-enable the screen whilst in a call. Is there a way to disable the proximity sensor on the phone or another way of fixing this issue?
memeny said:
Hi guys. I just followed this tutorial and replaced my digitizer. However, I must have disturbed the proximity or light sensor as now my screen blanks when I receive or make a call (as it did before) but now I can't re-enable the screen whilst in a call. Is there a way to disable the proximity sensor on the phone or another way of fixing this issue?
Click to expand...
Click to collapse
if you use cht 2.0 there is a switch of proximity sensor..so u can enable or disable it
Related
Hi guys,
I dont know if this has already been discussed or if anybody has had the same problem,
The proximity sensor that is supposed to turn off the display while in call only works when i make a call. If i am receiving a call then the display stays on and i end up ending the call accidently will my cheek.
I was wondering if there is a fix or app to sort this out. I am looking for something that purely sorts this problem out and dont really want any other features etc.
Many thanks,
Loz
I cannot replicate this problem. The sensor on my HD2 works perfectly on incoming calls.
no offences but i am sort of hoping others have this problem so im not the only one lol strength in numbers and all that...
can anyone relate to the problem i have, i have searched the settings time amd time again looking for proximity settings to see if it has been disable or something
please help!
hi guys,
i am still having problems with the proximity sensor when i receive a call, can anyone help????????
thanks
There has been a few posts like this in the past, but AFAIK no-one has posted a solution or reason for it happening. I've never had any problems with the proximity sensor on my handset so can't help any either, but I would guess it has something to do with using a screen-protector or possibly the screen being full of smudges right around the sensor.
thanks for the reply
i dont think it is the screen protector im using because it works whenever i make a call, its just when receiving a call it doesnt turn off the display!
does anyone no if there is a fix or reg edit i could do to get it working again?????
bluearmyb said:
thanks for the reply
i dont think it is the screen protector im using because it works whenever i make a call, its just when receiving a call it doesnt turn off the display!
does anyone no if there is a fix or reg edit i could do to get it working again?????
Click to expand...
Click to collapse
Hello,
I have the same bug and I post it yesterday, the screen off when I make a call and stay on when I am getting a call.
My Rom is 1.48.405 from UK, and I have screen protection from HTC with small hole on the sensors.
also when I making a call the screen off but need to turn on when you take the phone far from your head, sometimes it is heppens but sometimes not.
kochavy
When I bought the phone it was 1.43.405 and I upgraded it to 1.48.405.
maybe this is the problem!!
kochavy
just a innocent fact.
I had noticed that when starting to make a phone call the prox. sensor turns off the display but when the connection is made (the fuzzy noise and the first beep) the displays turns on. To reactivate the prox. sens i have to move the phone from my ear and then approach it again (please forgive my bad english) and the display turn off as designed. This issue can lead to the idea that the sensor is broken or malfunction.
I hope it helped
kochavy said:
Hello,
I have the same bug and I post it yesterday, the screen off when I make a call and stay on when I am getting a call.
My Rom is 1.48.405 from UK, and I have screen protection from HTC with small hole on the sensors.
also when I making a call the screen off but need to turn on when you take the phone far from your head, sometimes it is heppens but sometimes not.
kochavy
Click to expand...
Click to collapse
yeah it sounds the exact same problem. i have the exact same rom (1.48.405 from uk) and screen protector from htc. startin to become a big problem coz i keep ending calls accidently
hopefully can fine a solution
bluearmyb said:
yeah it sounds the exact same problem. i have the exact same rom (1.48.405 from uk) and screen protector from htc. startin to become a big problem coz i keep ending calls accidently
hopefully can fine a solution
Click to expand...
Click to collapse
Where did you buy it? mine from Israel.
vi_rus said:
just a innocent fact.
I had noticed that when starting to make a phone call the prox. sensor turns off the display but when the connection is made (the fuzzy noise and the first beep) the displays turns on. To reactivate the prox. sens i have to move the phone from my ear and then approach it again (please forgive my bad english) and the display turn off as designed. This issue can lead to the idea that the sensor is broken or malfunction.
I hope it helped
Click to expand...
Click to collapse
thanks for the info.
when i make a call the screen turns off straight the way before i have even put the phone to my ear, and to turn the display on i have to press a hard key
i am startin to think it is a proxomity sensor malfunction so hoping for some kind of fix
kochavy said:
Where did you buy it? mine from Israel.
Click to expand...
Click to collapse
i got mind from the uk, did you have the problem before you upgraded rom?
How do you turn it off? what is hard key?
what are you doing when you get a call?
kochavy
bluearmyb said:
i got mind from the uk, did you have the problem before you upgraded rom?
Click to expand...
Click to collapse
I dont know I just bought it and upgrade the same day.
Did you send mail to HTC?, I did but thay never send me mail back
kochavy said:
How do you turn it off? what is hard key?
what are you doing when you get a call?
kochavy
Click to expand...
Click to collapse
i dont no it does it automatically but not using the prox sensor, i usually press the back key to turn it back on but the it stays on
there is nothin i can do when i get a call the display always stays on
HTC havent got back to me so i was hoing some one on here would no wat to do!
may someone can help us out?
I will wait for Rom 1.66
yeah me too hopefully that will resolve our problem
ill be checking htc website constantly until the uk rom is released
After two weeks testing I found out that the original screen protector with the two holes for the sensor makes the problems!!!
thake the screen protector out or cut it and the proximity sensor will work perfect.
Kochavy
So I dropped my nexus 4 cracking the screen which required me to replace the LCD assembly. After putting it back together and firing it up I noticed that the Auto Rotation (Yes the setting is checked in the settings) and the proximity sensor are not working. I installed Android sensor box and it is getting no reading from the proximity sensor or the gyro sensor. I have taken the phone apart multiple times to ensure everything is connect and everything looks correct. I have also unlocked the phone and have re flashed the stock rom with it not fixing the problem. Any help would be much appreciated.
My wife destroyed her display. Did same but gyro works fine but proxy is the problem. Work around so far is to set power button to end calls becasue screen just goes black when making/receiving calls kind of makes phone useless if you can't see screen.
I too have taken it apart several times and still nothing. Next plan is to find a new sensor unit and replace it.
From what I have been able to see in all my searching the proxy is extremely sensitive any deviation in placement, smuge on unit or display, minor deviation on color of display, screen protector, any interference from skins can affect it so check all those also.
In one of the threads on the Galaxy Nexus there is a patch to turn off sensor and there is mention of app in market that does the same, haven't tried yet have to get phone from wife to try, could be possible solutions also.
Will post back with findings as I get to try them.
Found great app in market Sensor Kinetic Pro shuts off proximity sensor or any other sensor no more problem with black screen after making calls. Still going to try replacing sensor however found it on Amazon less then $5.00.
silvagroup said:
My wife destroyed her display. Did same but gyro works fine but proxy is the problem. Work around so far is to set power button to end calls becasue screen just goes black when making/receiving calls kind of makes phone useless if you can't see screen.
I too have taken it apart several times and still nothing. Next plan is to find a new sensor unit and replace it.
From what I have been able to see in all my searching the proxy is extremely sensitive any deviation in placement, smuge on unit or display, minor deviation on color of display, screen protector, any interference from skins can affect it so check all those also.
In one of the threads on the Galaxy Nexus there is a patch to turn off sensor and there is mention of app in market that does the same, haven't tried yet have to get phone from wife to try, could be possible solutions also.
Will post back with findings as I get to try them.
Found great app in market Sensor Kinetic Pro shuts off proximity sensor or any other sensor no more problem with black screen after making calls. Still going to try replacing sensor however found it on Amazon less then $5.00.
Click to expand...
Click to collapse
Somewhat comforted to see others are also having the same problem... I recently replaced my nexus 4 screen only to have my proximity sensor fail on me too. Interestingly enough, i disassembled my phone multiple times to test if the sensor still works, turns out it does, but it is super sensitive. In my first experiment I had the sensor dangling out of the socket to see if it was still receptive to light, it worked perfectly - I used my hand as a 'face-simulator' to test for sensitivity. I then tried to place it back in the rubber grommet with the grommet seated firmly in the socket and what I found was that it worked, so long as there was only limited pressure on the enclosure. For example, it only works when there are no adjacent screws (for the plastic motherboard cover) applying pressure in the nearby area. I thought I could live with that, but then I tried putting the rear plastic cover back on and,... back to square one, dead screen on-call. I figure it has something to do with either pressure sensitivity or perhaps the pressure from the screws or the rear cover pushes the sensor too close to the glass?
Anyway I'd be keen to see if replacing the audio jack will actually fix the problem, any of you guys had any success with that? Meanwhile i'm going to just use the power button for ending calls. Any tips for how to use the speakerphone during a call?
Cheers fellas.
New sensor arrived yesterday changed out my wife's non functioning sensor and new one working great. Old sensor was bad !!!! She had dropped the phone several times and last accident she unintentionally threw it. Suggest no one do that
Sent from my Amazon Kindle Fire HD using xda premium
silvagroup said:
New sensor arrived yesterday changed out my wife's non functioning sensor and new one working great. Old sensor was bad !!!! She had dropped the phone several times and last accident she unintentionally threw it. Suggest no one do that
Sent from my Amazon Kindle Fire HD using xda premium
Click to expand...
Click to collapse
New sensor arrived the other day, I have since swapped out the old one, everything works great now!
17
dhaub said:
New sensor arrived the other day, I have since swapped out the old one, everything works great now!
Click to expand...
Click to collapse
whered u get the sensor?
chamilun said:
whered u get the sensor?
Click to expand...
Click to collapse
I know this is old but I'm having the same issue. How did you guys make out? Were did you get the sensor? Saw one on ebay $109 seems pricey
btack said:
I know this is old but I'm having the same issue. How did you guys make out? Were did you get the sensor? Saw one on ebay $109 seems pricey
Click to expand...
Click to collapse
I put a case on mine and it started working. It always would work if i put a bit of pressure on different parts of the phone. So im not sure if bad contact on sensor or if more some type of alignment issue. But it does work now. speakerphone is terrible since cracked screen tho..
I tried installing the xposed framework but that threw a little notice saying it wasnt going to work. I looked for apps ont he app store but that didnt work as well..
Any ideas on how to disable the proximity sensor so when I turn the screen on it doesnt turn right back off?
Any help is greatly appreciated.
the issue might be your proximity sensor's alignment. it might not have aligned properly. there is a small black rubber holder to hold the proximity sensor. may be you might be missing it or might have loosen it. you can easily fix/align it, if you can open the back cover.
you can install a custom rom to overcome this sudden screen off issue. but when you taking a call your screen will be turning off until other user disconnect the call..
I suggest you fix/align the proximity sensor..
P.S:
There is a small troubleshooting step you can do to see whether your proximity sensor has a slight alignment issue. get a torch or good direct light source and point it directly at proximity sensor. if you can turn your screen on while pointing that light towards proximity sensor, you should have a very small alignment issue. there are plenty of proximity sensor test apps on play store too.
appsmarsterx said:
the issue might be your proximity sensor's alignment. it might not have aligned properly. there is a small black rubber holder to hold the proximity sensor. may be you might be missing it or might have loosen it. you can easily fix/align it, if you can open the back cover.
you can install a custom rom to overcome this sudden screen off issue. but when you taking a call your screen will be turning off until other user disconnect the call..
I suggest you fix/align the proximity sensor..
P.S:
There is a small troubleshooting step you can do to see whether your proximity sensor has a slight alignment issue. get a torch or good direct light source and point it directly at proximity sensor. if you can turn your screen on while pointing that light towards proximity sensor, you should have a very small alignment issue. there are plenty of proximity sensor test apps on play store too.
Click to expand...
Click to collapse
Interseting... My screen broke so I had it replaced and its been having an issue ever since. Also, I don't use it for calls. It is just sitting on a mount in my car most of the day running a few car apps. But it is in airplane mode basically all day lol.
Pr3dict said:
Interseting... My screen broke so I had it replaced and its been having an issue ever since. Also, I don't use it for calls. It is just sitting on a mount in my car most of the day running a few car apps. But it is in airplane mode basically all day lol.
Click to expand...
Click to collapse
that makes sense.. you also replced front housing too right? that's where that rubber proximity sensor holder attached.. if you replace original front housing with aftermarket housing that rubber holder probably won't come with it. most of the repair technicians don't know this.. if you still have the old front housing you should be able to recover it and attach to your new housing..
p. s:
or you should be able to buy it.
here it is
http://rounded.com/lg-g2-d802-rubber-proximity-sensor-module-mbl65540401.html#/product/21920 (also try ebay or aliexpress )
appsmarsterx said:
that makes sense.. you also replced front housing too right? that's where that rubber proximity sensor holder attached.. if you replace original front housing with aftermarket housing that rubber holder probably won't come with it. most of the repair technicians don't know this.. if you still have the old front housing you should be able to recover it and attach to your new housing..
p. s:
or you should be able to buy it.
here it is (also try ebay or aliexpress )
Click to expand...
Click to collapse
Honestly, if its possible I'd rather just disable it completely. I'd rather not open the phone up again if I don't have to and I will never use it for calls anyway.
Pr3dict said:
Honestly, if its possible I'd rather just disable it completely. I'd rather not open the phone up again if I don't have to and I will never use it for calls anyway.
Click to expand...
Click to collapse
if you're not using your g2 for calls, I'd recommend flashing a custom aosp rom. so you wouldn't get in to this sudden screen off issue while unlocking it..
appsmarsterx said:
if you're not using your g2 for calls, I'd recommend flashing a custom aosp rom. so you wouldn't get in to this sudden screen off issue while unlocking it..
Click to expand...
Click to collapse
That sounds exciting.. Lets do it!!!!!!!!!!!!
Hi all!, I would like to coment this issue and ask if anyone experimented this, my little son smash with a spoon my x compact and cracked the screen, I replaced twice the screen and tested 3 diferents proximity sensors (cable flex) already and still i'm having this issue.
any comments or help will be very appreciated
regards from chile!
I hace the same issue
ramirowski said:
Hi all!, I would like to coment this issue and ask if anyone experimented this, my little son smash with a spoon my x compact and cracked the screen, I replaced twice the screen and tested 3 diferents proximity sensors (cable flex) already and still i'm having this issue.
any comments or help will be very appreciated
regards from chile!
Click to expand...
Click to collapse
i recently replaced the lcd and also have the same issue. It detected that my screen is covered so i can't hang on a call because the screen wont turn on.
but suddenly it works when i cleanup the screen with a damp cloth. but sometimes it doesnt work.
I know this thread is super old, but before I start a new one on exactly this - I had to disassemble my phone to replace the audio jack, and since then, my proximity sensor won't work at all. I double checked the flex cable and plug, tested the sensor outside the phone, still nothing. It ONLY works if I put sth white or metal-like exactly 2 mm away from the screen, no nearer, no further. Its super strange and annoying. Was anybody able to solve this?
Edit: LED and ambient light sensor (which is exactly the same sensor) are working! And before the sensor stopped working I did not even touch it at all!
Hello everyone
I have just changed my Poco M3 's lcd screen (I bought one with the frame already glued to it).
When I turn it back on, There is random messages like "remove your hand from in front of the screen", and when I make a call, the screen remains black, and we can't have access to the screen, in short, the proximity sensor has a problem.
This problem sometimes happened before I changed the screen, but it is constant now.
Does Anyone know if this is a known issue?
Can you help me locate this proximity sensor ?
Is there a plug I did'nt connected correctly, or is it inside the screen?
Can the sensor functions be disabled? In the call settings, I couldn't find how...
If the proximity sensor is really defective, should the sensor allways detec something, or should it detect nothing?
Thank you
i have sam problem ,,,,any solution ?
rafikmob said:
i have sam problem ,,,,any solution ?
Click to expand...
Click to collapse
Nope.
fredfred41 said:
Hello everyone
I have just changed my Poco M3 's lcd screen (I bought one with the frame already glued to it).
When I turn it back on, There is random messages like "remove your hand from in front of the screen", and when I make a call, the screen remains black, and we can't have access to the screen, in short, the proximity sensor has a problem.
This problem sometimes happened before I changed the screen, but it is constant now.
Does Anyone know if this is a known issue?
Can you help me locate this proximity sensor ?
Is there a plug I did'nt connected correctly, or is it inside the screen?
Can the sensor functions be disabled? In the call settings, I couldn't find how...
If the proximity sensor is really defective, should the sensor allways detec something, or should it detect nothing?
Thank you
Click to expand...
Click to collapse
Yes.
I had the same issue.
In all the tutorials in you tube they noy showing the rubber part that laying between the proximity sensor and the screen.
So when you are replacing the screen and use a screen with a frame, you need to move the bottom and the top boards from the old frame to the new one, and when you are doing thay there is this tinny rubber, that is probably pop's out when you are pulling the top electric board and you not even know it.
I just realized that it missing until I gave up, and start to clean my working area, and suddenly I sat it.
You can sent me email to [email protected],
I can help you
Hi, thanks for the answer, I just figured this out yesterday, and now mine works too!!!
Try to disable pocket mode in lockscreen setting ...
Thanks for your answer, but my problem is solved, look at Edital1981 post.
Thanks