So I dropped my nexus 4 cracking the screen which required me to replace the LCD assembly. After putting it back together and firing it up I noticed that the Auto Rotation (Yes the setting is checked in the settings) and the proximity sensor are not working. I installed Android sensor box and it is getting no reading from the proximity sensor or the gyro sensor. I have taken the phone apart multiple times to ensure everything is connect and everything looks correct. I have also unlocked the phone and have re flashed the stock rom with it not fixing the problem. Any help would be much appreciated.
My wife destroyed her display. Did same but gyro works fine but proxy is the problem. Work around so far is to set power button to end calls becasue screen just goes black when making/receiving calls kind of makes phone useless if you can't see screen.
I too have taken it apart several times and still nothing. Next plan is to find a new sensor unit and replace it.
From what I have been able to see in all my searching the proxy is extremely sensitive any deviation in placement, smuge on unit or display, minor deviation on color of display, screen protector, any interference from skins can affect it so check all those also.
In one of the threads on the Galaxy Nexus there is a patch to turn off sensor and there is mention of app in market that does the same, haven't tried yet have to get phone from wife to try, could be possible solutions also.
Will post back with findings as I get to try them.
Found great app in market Sensor Kinetic Pro shuts off proximity sensor or any other sensor no more problem with black screen after making calls. Still going to try replacing sensor however found it on Amazon less then $5.00.
silvagroup said:
My wife destroyed her display. Did same but gyro works fine but proxy is the problem. Work around so far is to set power button to end calls becasue screen just goes black when making/receiving calls kind of makes phone useless if you can't see screen.
I too have taken it apart several times and still nothing. Next plan is to find a new sensor unit and replace it.
From what I have been able to see in all my searching the proxy is extremely sensitive any deviation in placement, smuge on unit or display, minor deviation on color of display, screen protector, any interference from skins can affect it so check all those also.
In one of the threads on the Galaxy Nexus there is a patch to turn off sensor and there is mention of app in market that does the same, haven't tried yet have to get phone from wife to try, could be possible solutions also.
Will post back with findings as I get to try them.
Found great app in market Sensor Kinetic Pro shuts off proximity sensor or any other sensor no more problem with black screen after making calls. Still going to try replacing sensor however found it on Amazon less then $5.00.
Click to expand...
Click to collapse
Somewhat comforted to see others are also having the same problem... I recently replaced my nexus 4 screen only to have my proximity sensor fail on me too. Interestingly enough, i disassembled my phone multiple times to test if the sensor still works, turns out it does, but it is super sensitive. In my first experiment I had the sensor dangling out of the socket to see if it was still receptive to light, it worked perfectly - I used my hand as a 'face-simulator' to test for sensitivity. I then tried to place it back in the rubber grommet with the grommet seated firmly in the socket and what I found was that it worked, so long as there was only limited pressure on the enclosure. For example, it only works when there are no adjacent screws (for the plastic motherboard cover) applying pressure in the nearby area. I thought I could live with that, but then I tried putting the rear plastic cover back on and,... back to square one, dead screen on-call. I figure it has something to do with either pressure sensitivity or perhaps the pressure from the screws or the rear cover pushes the sensor too close to the glass?
Anyway I'd be keen to see if replacing the audio jack will actually fix the problem, any of you guys had any success with that? Meanwhile i'm going to just use the power button for ending calls. Any tips for how to use the speakerphone during a call?
Cheers fellas.
New sensor arrived yesterday changed out my wife's non functioning sensor and new one working great. Old sensor was bad !!!! She had dropped the phone several times and last accident she unintentionally threw it. Suggest no one do that
Sent from my Amazon Kindle Fire HD using xda premium
silvagroup said:
New sensor arrived yesterday changed out my wife's non functioning sensor and new one working great. Old sensor was bad !!!! She had dropped the phone several times and last accident she unintentionally threw it. Suggest no one do that
Sent from my Amazon Kindle Fire HD using xda premium
Click to expand...
Click to collapse
New sensor arrived the other day, I have since swapped out the old one, everything works great now!
17
dhaub said:
New sensor arrived the other day, I have since swapped out the old one, everything works great now!
Click to expand...
Click to collapse
whered u get the sensor?
chamilun said:
whered u get the sensor?
Click to expand...
Click to collapse
I know this is old but I'm having the same issue. How did you guys make out? Were did you get the sensor? Saw one on ebay $109 seems pricey
btack said:
I know this is old but I'm having the same issue. How did you guys make out? Were did you get the sensor? Saw one on ebay $109 seems pricey
Click to expand...
Click to collapse
I put a case on mine and it started working. It always would work if i put a bit of pressure on different parts of the phone. So im not sure if bad contact on sensor or if more some type of alignment issue. But it does work now. speakerphone is terrible since cracked screen tho..
Related
i tried to search the forum with no results btw
have two cases while receiving/calling with hd2
1. via bluetooth headset - even when the phone is in the pocket some apps starts randomly, even call is disconnected - isn't proximity should cause phone scrren to be blank all time?
2. via the phone - sometimes while talking screen is still dark and pressing eg. home key puts display on. sometimes moving phone away from ear turns screen on.
do you have some or its something with my phone?
I have the same problem, the proximity sensor does not work, I think it works only outside when you have strong light, try it and let me know.
make a call the screen will go off now move it from your face loking up at the sun outside you will see that the screen will turn on.
it works only when I makes a call. when I am getting a call it atays on.
kochav
kochavy said:
I have the same problem, the proximity sensor does not work, I think it works only outside when you have strong light, try it and let me know.
make a call the screen will go off now move it from your face loking up at the sun outside you will see that the screen will turn on.
it works only when I makes a call. when I am getting a call it atays on.
kochav
Click to expand...
Click to collapse
Well you would be wrong then.
It's a proximity sensor, not a light sensor. I just made a call in my darkened room and the proximity sensor functioned flawlessly.
thake the screen protector out or cut it and the proximity sensor will work perfect.
kochavy
kochavy said:
thake the screen protector out or cut it and the proximity sensor will work perfect.
kochavy
Click to expand...
Click to collapse
Wow who would've thought that covering up a sensor designed to sense when objects are close to it would impede its functionality.
Your revelation hepled me fix the microphone on my phone. It wasn't working, and then I realized I had my hand over it!
Yes I have had issues even with the original HTC screen protector which has two small holes directly over the sensors. I finally had to remove it.
Cutting the protector I have not been very successful so far. This creates sharp edges and the protector tends to peel off from that point. For the time being I am relying on the fact that the screen on the HD2 is scratch resistant enough that with normal care it would not get scratched. With over 2 months of use without a protector my screen is still scratchless.
IF it is anything to do with the screen protector, then there are plenty out there that don't have this effect.
I've got a protector on my HD2 and have had it there since just after I got it, so just over 2 months now. The screen protector has worked perfectly, even, kochavy, in the dark, because it detects proximity not light.
I suggest removing any screen protectors and seeing if you still have the problem. If you do, send the phone back as faulty. If you don't, get a better screen protector.
johncmolyneux said:
IF it is anything to do with the screen protector, then there are plenty out there that don't have this effect.
I've got a protector on my HD2 and have had it there since just after I got it, so just over 2 months now. The screen protector has worked perfectly, even, kochavy, in the dark, because it detects proximity not light.
I suggest removing any screen protectors and seeing if you still have the problem. If you do, send the phone back as faulty. If you don't, get a better screen protector.
Click to expand...
Click to collapse
do you have the original HTC screen protector with the two holes? there are some protector that does not cover the top of the phone and leave the two sensors out from protection.
kochavy said:
do you have the original HTC screen protector with the two holes? there are some protector that does not cover the top of the phone and leave the two sensors out from protection.
Click to expand...
Click to collapse
No I don't. The one that came with it never please me much, so I bought some better ones.
The protectors I have don't have any holes for the sensors at the top, but like I said, it just works perfectly. There's a lot more to this issue that just the screen protector, as some people have reported that it works perfectly when they ring certain number, but not when they ring others. From what I've read on other threads, this is commonplace for people who are having this problem, so it's obviously not an issue with their screen protectors. It sounds like a software issue to me, but since it can't be identified as such, they should just return their phones as faulty and hope the replacement doesn't have the same issue.
It would be interesting to know if the people with the described issue have upgraded the ROM to 1.66, as this seems to have fixed a whole slew of issues.
Sensor works by reflecting infrared light. There is small IR lamp with IR detector nearby. You can check that by looking at the sensor through some digital camera or camcorder, whose are usually sensitive to this light. Don't forget the phone must be in call, otherwise the sensor is turned off.
I think the sensor itself is OK. But there seems to be some relationship with guess what .. G-sensor ! Once I found the screen just won't go off during call, and it was when I was lying during the call, and I was holding the phone upside down portrait style.
But as I turned the phone to normal position (normal portrait) and back, it started to work with no problem.
I only had problem with proximity sensor once since then .. but rotating the phone up and down helped again.
I think this needs more investigation .. if you encounter the problem try this.
I have two SGS4's. On one, when I place a call, the call screen stays on and it turns off when I raise it to my ear. It then turns on when I pull it away.
On the other, as soon as I place I call the screen goes dark. The only way to get it back is to push the power button and unlock the phone.
The "Turn screen off during a call" setting is set on both phones.
Anyone have any idea what is causing this? Next step is to do a wipe, but that just sucks.
I'm on stock and not rooted.
Thanks!
Sadly I have the same issue on mine but not my wifes.... hope somebody knows something or maybe the rumored update thats going to be coming out will have a fix?? I dunno...
jprocket45 said:
Sadly I have the same issue on mine but not my wifes.... hope somebody knows something or maybe the rumored update thats going to be coming out will have a fix?? I dunno...
Click to expand...
Click to collapse
Have you tried doing a reset yet? I'm hesitant since it's a pain to restore everything the way I like it. Definitely a weekend task.
Sirchuk said:
Have you tried doing a reset yet? I'm hesitant since it's a pain to restore everything the way I like it. Definitely a weekend task.
Click to expand...
Click to collapse
I have done a reset it solved it a little I guess but still having issues once in a great while all works well id blame it on the otterbox case but my wife has one so dunno if that could be the issue you have a case on urs never really played with the phone outside of the case lol
Sent from my SPH-L720 using xda app-developers app
jprocket45 said:
I have done a reset it solved it a little I guess but still having issues once in a great while all works well id blame it on the otterbox case but my wife has one so dunno if that could be the issue you have a case on urs never really played with the phone outside of the case lol
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Nope, mine is naked for now. I'll have to do a reset today/tomorrow and see if that solves my issue. If not, I'm taking back to the store for an exchange. It's only been a couple of weeks.
To late for me to take it back but suppose to be a update coming soon that does alot of fixes so we will see Good luck like I said reset I did notice fixed it a bit let me know how it goes I'm threw sprint just curious if you have them only reason I ask if it's just a carrier issue with software or something I doubt it but just figured to see who you had lol
Sent from my SPH-L720 using xda app-developers app
Dial *#7353# and make a test
sent from my Galaxy
samersh72 said:
Dial *#7353# and make a test
sent from my Galaxy
Click to expand...
Click to collapse
That's what I was looking for!
Sure enough,the proximity sensor was always on and wouldn't go off.
I'm with T-Mobile and they have a 30 return/exchange policy if you buy it outright, which I had, so it only took about 10 minutes for them to exchange it!
Thanks for the testing code! XDA comes through once again!
Same problem when I'm making a call, the screen goes blank when I put it to my head and when I remove it nothing happens.
I tried *#7353# and the proximity sensor goes of but will not stop..
I'm currently rooted, could it solve the problem to go back to stock?
Possible Fix
jprocket45 said:
Sadly I have the same issue on mine but not my wifes.... hope somebody knows something or maybe the rumored update thats going to be coming out will have a fix?? I dunno...
Click to expand...
Click to collapse
I have had the same problem over the last 3 weeks and decided to take a gamble. I tightened up all the screws on the device and squeezed real hard on the area where the prox sensor is and poof... it works. I have no idea what was up but I feel like the sensor is loose and the pressure resolved the issue. Many other post have talked about cleaning the area over the prox real good and it works but I think its the pressure that is actually fixing the issue. Anyone else have any ideas? Sorry if this was posted incorrectly, I have never posted before but I felt this issue is a PITA.
I have i9500. Unrooted with latest OTA update installed (Build XXUBMG1).
I've been having the same problem with proximity sensor. When proximity sensor is enabled during phone calls (both regular calls and Viber calls), the screen is disabled. Also, my screen sometimes remains on during the call until I place it to my ear and sometimes it turns off immediately during the call. It wasn't always like this, but I can't remember when it started happening, but I suspect it was since the last OTA update.
I've searched around online and have noticed several comments.
Apparently this is an issue with several Galaxy models over the years (sorry, I lost the reference) and this thread: http://forum.xda-developers.com/showthread.php?t=2208440&page=2 mentions Galaxy Note 2 and SGS3 having the issue where there is something wrong with the threshold setting in the calibration settings. Mine appears to have the same issue where it always reads 0cm (i.e. always covered). However this thread also suggests a fix to input some code to adjust the calibration if your phone is rooted.
One suggestion is there is a misalignment of the sensor and so it might be partially covered by the phone's front fascia, causing the sensor to always read as covered or "1" or 0cm. But looking carefully at mine, it looks centred dead-on.
This thread http://forum.xda-developers.com/showthread.php?t=2417401 indicates that the sensor is always on as can be seen through a digital camera LCD (but not with your naked eye). I've tried this with my DSLR and confirmed this also happens with mine, even when the option is set to turn it off during calls, and also even when air gesture (which uses the prox sensor) is turned off. Not sure if this affects the problem or not though.
Can't remember where I read this, but someone mentioned that when shining a bright light over the phone, it works. So I downloaded two sensor apps from Google Play: Android Sensor Box, and Proximity Sensor Finder. And also used the inbuilt *#7353* feature. All three report that my proximity sensor is always reading that something is constantly covering it..... EXCEPT when a bright light (the sun works) is shining on the light sensor - not the proximity sensor. I tested this by using a torch on both sensors. When blocking light from the light sensor, the problem persists, but not when I allow the light to shine on the sensor. So it appears that they both act in unison.
Similar issue with air gestures, which used to work when my phone was new, even in relatively ambient light (but obviously not in a dark room), but now doesn't under similar conditions, and again... EXCEPT when a bright light is shining on the light sensor, or when I'm out in the sun.
Anyway, I'm not willing to root my phone at this point, just to try the fix suggested in http://forum.xda-developers.com/showthread.php?t=2208440&page=2 (my phone was bought overseas and returning it wouldn't be convenient for me). And since this wasn't always a problem with my phone, I suspect it is a software problem related to one of the recent OTA updates.
Edit: After further testing, it seems that air gestures use the front camera as well as the light and proximity sensors.
My proximity sensor works - when I go into diagnostic, it goes green when I bring a hand near the sensor - my issue is that it doesn't seem to notice when I remove my hand and there no longer is anything proximal - until I hit the back button to exit the test. Other than blowing out the earphone jack, does anyone have a suggestion?
Thx.
divche said:
I have i9500. Unrooted with latest OTA update installed (Build XXUBMG1).
I've been having the same problem with proximity sensor. When proximity sensor is enabled during phone calls (both regular calls and Viber calls), the screen is disabled. Also, my screen sometimes remains on during the call until I place it to my ear and sometimes it turns off immediately during the call. It wasn't always like this, but I can't remember when it started happening, but I suspect it was since the last OTA update.
I've searched around online and have noticed several comments.
Apparently this is an issue with several Galaxy models over the years (sorry, I lost the reference) and this thread: http://forum.xda-developers.com/showthread.php?t=2208440&page=2 mentions Galaxy Note 2 and SGS3 having the issue where there is something wrong with the threshold setting in the calibration settings. Mine appears to have the same issue where it always reads 0cm (i.e. always covered). However this thread also suggests a fix to input some code to adjust the calibration if your phone is rooted.
One suggestion is there is a misalignment of the sensor and so it might be partially covered by the phone's front fascia, causing the sensor to always read as covered or "1" or 0cm. But looking carefully at mine, it looks centred dead-on.
This thread http://forum.xda-developers.com/showthread.php?t=2417401 indicates that the sensor is always on as can be seen through a digital camera LCD (but not with your naked eye). I've tried this with my DSLR and confirmed this also happens with mine, even when the option is set to turn it off during calls, and also even when air gesture (which uses the prox sensor) is turned off. Not sure if this affects the problem or not though.
Can't remember where I read this, but someone mentioned that when shining a bright light over the phone, it works. So I downloaded two sensor apps from Google Play: Android Sensor Box, and Proximity Sensor Finder. And also used the inbuilt *#7353* feature. All three report that my proximity sensor is always reading that something is constantly covering it..... EXCEPT when a bright light (the sun works) is shining on the light sensor - not the proximity sensor. I tested this by using a torch on both sensors. When blocking light from the light sensor, the problem persists, but not when I allow the light to shine on the sensor. So it appears that they both act in unison.
Similar issue with air gestures, which used to work when my phone was new, even in relatively ambient light (but obviously not in a dark room), but now doesn't under similar conditions, and again... EXCEPT when a bright light is shining on the light sensor, or when I'm out in the sun.
Anyway, I'm not willing to root my phone at this point, just to try the fix suggested in http://forum.xda-developers.com/showthread.php?t=2208440&page=2 (my phone was bought overseas and returning it wouldn't be convenient for me). And since this wasn't always a problem with my phone, I suspect it is a software problem related to one of the recent OTA updates.
Edit: After further testing, it seems that air gestures use the front camera as well as the light and proximity sensors.
Click to expand...
Click to collapse
Proximity sensor
I had problem with proximity sensor in my galaxy s3 mini but my rear camera had error and fc also.I tried everything and nothing work.Finaly I open device and disconect camera and connect it again and camera started to work.But for my suprise proximity sensor now works perfect and I did not touch it.I can't explain what happend but I am happy.
I guess what it comes down to is.....for some you can reset the sensor, for some they can blow it out with compressed air, but others actually have to take apart their phone to fix this issue.
marduj5 said:
I had problem with proximity sensor in my galaxy s3 mini but my rear camera had error and fc also.I tried everything and nothing work.Finaly I open device and disconect camera and connect it again and camera started to work.But for my suprise proximity sensor now works perfect and I did not touch it.I can't explain what happend but I am happy.
Click to expand...
Click to collapse
hi
i have the same problem. any solution guys ?
( BTW - im on NB3 INS firmware )
I think I summarized the available solutions just before your post. There is no single thing which always works, you'll need to go through and see which fixes yours. This happens primarily because of hardware, with the sensor getting dirty - so it comes down to how invasive the procedure to clean it.
Shohat said:
i have the same problem. any solution guys ?
( BTW - im on NB3 INS firmware )
Click to expand...
Click to collapse
Hubris2 said:
I think I summarized the available solutions just before your post. There is no single thing which always works, you'll need to go through and see which fixes yours. This happens primarily because of hardware, with the sensor getting dirty - so it comes down to how invasive the procedure to clean it.
Click to expand...
Click to collapse
i'm sorry. i already tried your first solution and it worked like charm ! thank you ! :good:
HOw to solve, none of this works. How cann i clean proximity?
So i recently upgraded to Lollipop but my proximity sensor is broken. I used an app called Proximity Screen off lite but it is not working on latest android lollipop. So now when i make a call my screen goes dark until the call is disconnected from other party. same is the case with incoming call. Please help
I was in the same situation as you last weekend. Unfortunately, there's no way to get around it in software that I know of. I even went as far as developing an app from scratch to duplicate Proximity Screen Off Lite's functionality, but ended up hitting a road block on the OS level. Another option that would've worked pre-5.0 was to use an xposed mod to disable the proximity sensor, but of course that doesn't work in 5.0 now. Hopefully someone else can chime in with a software solution that I couldn't figure out.
Did you replace your phone's screen by any chance?
Shimakaze said:
I was in the same situation as you last weekend. Unfortunately, there's no way to get around it in software that I know of. I even went as far as developing an app from scratch to duplicate Proximity Screen Off Lite's functionality, but ended up hitting a road block on the OS level. Another option that would've worked pre-5.0 was to use an xposed mod to disable the proximity sensor, but of course that doesn't work in 5.0 now. Hopefully someone else can chime in with a software solution that I couldn't figure out.
Did you replace your phone's screen by any chance?
Click to expand...
Click to collapse
Yes i did :/ nownfed up and hating it. there has to be someway which disable the hardware :/
sink1991 said:
Yes i did :/ nownfed up and hating it. there has to be someway which disable the hardware :/
Click to expand...
Click to collapse
I replaced the original screen with an after-market one as well, and that's what caused my proximity sensor issue. There is a good chance your proximity sensor is actually working perfectly, but the after-market screen is blocking it from reading a "far" value. If you're comfortable with taking your phone apart, you could fix it without replacing anything. There were two things that I did to fix mine, but I'm not sure which of the two actually did the trick. 1) I repositioned the sensor so that it sits further away from the glass, and 2) I scratched off the black paint on the back side of the glass around the two clear sensor holes. Obviously you should attempt option 1 first, because the second option is permanent and will damage the aesthetics of your phone. Others have reported success with option 1, by gluing a thin spacer with two holes to the front of the sensor, but I did not have any luck with it when I tried initially. You will find that it helps a lot to do this while the phone is on, and you can see the results of your changes immediately with the Proximity Sensor Finder app.
Edit: Before you attempt any of the fixes, you should verify that your sensor is in fact working by pointing it away from the phone after opening up the back.
I had the same problem, I gave up on a software fix and I ended up taking the phone apart and fixing it outright. It's not too difficult, all you need is a plastic tool to open the case and a T5 and a 00 screwdriver.
There's a good youtube video (I can't link - see /watch?v=AZDAIgwbXk4) showing how to do it. Skip the battery section, you can keep that in place. At 9:00 he indicates where the proximity sensor and light sensor are. Take the small rubber gasket that covers the two sensors, and flip it around so that the larger hole is over the proximity sensor. Put it back together and turn it on, it should work perfectly.
Also, in the interim, you may wish to have your phone end calls with the power button, it can be found under accessibility settings. At least that way you won't be stuck waiting for the other party to pick up or hang up.
Admiral Nelson said:
I had the same problem, I gave up on a software fix and I ended up taking the phone apart and fixing it outright. It's not too difficult, all you need is a plastic tool to open the case and a T5 and a 00 screwdriver.
There's a good youtube video (I can't link - see /watch?v=AZDAIgwbXk4) showing how to do it. Skip the battery section, you can keep that in place. At 9:00 he indicates where the proximity sensor and light sensor are. Take the small rubber gasket that covers the two sensors, and flip it around so that the larger hole is over the proximity sensor. Put it back together and turn it on, it should work perfectly.
Click to expand...
Click to collapse
I did the same thing. It's a common issue, and that's the typical fix.
Planterz said:
I did the same thing. It's a common issue, and that's the typical fix.
Click to expand...
Click to collapse
I had the same problem, solved by a thin plastic sheat that I drilled two holes in and then cut to the right size.
I placed the plastic part in the bottom of the hole, where to fit the sensor. I also shaved of aboute 1 mm on the part that presses the sensor from the back.
( I hade already taken the blackish film away in a own attempt to fix the problem, at least the light sensor seems to meassure more accurat)
Hi all, I've similar problem on my LG G2 D802. I have tempered glass with covered prox. On KK everything was OK, but unfortunately Lollipop has much more intensivity on prox
and I had the same issue as you, I mean - turned screen while I maked call and vice versa. Moreover, I can't get in to the service menu on LP (AOSP 5.1.1).
I bought new tempered glass with uncovered prox but fortunately Xposed has working old module: Disable proximity sensor.
I don't know about what module you guys talked about but this module works very well.
Hi,
I've recently changed the LCD panel on my Nexus 4, as well as the headphone jack (which includes the proximity sensor) - the screen was broken, and the headphone jack had very noisy output.
After putting it back together, I noticed that the proximity sensor wasn't working - during calls, it would constantly blank out the screen, and there was no way to unblank it (i.e. it seems to permanently think there's something there).
I took it apart again and noticed that the rubber gasket that fits behind the sensor is missing - it must have come off during the repair and gotten lost.
I tried putting some Blu-Tack behind it as a temporary fix, but no change. Now, I'm not so sure the new proximity sensor is working either.
Anyhow, my first question is, where can I buy a replacement rubber gasket? I've done a search online, and I can't seem to find it for sale anywhere?
Is it available as part of another spare part for the Nexus 4?
Cheers,
Victor
I had to replace the screen on my n4 too and fixing the proximity sensor was a pain in the ass. I had the rubber gasket but it was only working when the front panel was not attached as soon as i attached the front panel it stops working i.e. when in call the screen goes off but it doesn't come back on. So what the guy did was to scratch off the two holes on the top left from the inside of the panel. its looks a bit nasty but its working fine now. you might wana try to scratch off a bit neatly. like in a round shape.
I dont know if the gasket is the cause, but I know a case where this exact problem happens : its when u don't push the sensor well enough to fit in its place, cuz it should be near enough, or it'd blank the screen during calls. Try using a flat screw driver, and push the orange part where the sensors are well enough, that should do the work ( don't push haaard or I'll Damage it). I hope that'd help, cuz finding this gasket is hard. And this applies also for the guy who commented, cuz this is the case for him
Sent from my Nexus 4 using XDA Free mobile app
According to this post:
http://forum.xda-developers.com/nexus-4/help/proximity-sensor-rubber-part-t2571396
the LG part number is MBL65457701
I managed to find an eBay seller selling it (original_parts_mobile_99):
http://www.ebay.com.au/itm/Goma-Sen...gle-Nexus-4-rubber-New-ORIGINAL-/181369205976
I used a small piece of credit card, drilled two holes with t3 screwdriver. Worked like a charm!!!!
I tried installing the xposed framework but that threw a little notice saying it wasnt going to work. I looked for apps ont he app store but that didnt work as well..
Any ideas on how to disable the proximity sensor so when I turn the screen on it doesnt turn right back off?
Any help is greatly appreciated.
the issue might be your proximity sensor's alignment. it might not have aligned properly. there is a small black rubber holder to hold the proximity sensor. may be you might be missing it or might have loosen it. you can easily fix/align it, if you can open the back cover.
you can install a custom rom to overcome this sudden screen off issue. but when you taking a call your screen will be turning off until other user disconnect the call..
I suggest you fix/align the proximity sensor..
P.S:
There is a small troubleshooting step you can do to see whether your proximity sensor has a slight alignment issue. get a torch or good direct light source and point it directly at proximity sensor. if you can turn your screen on while pointing that light towards proximity sensor, you should have a very small alignment issue. there are plenty of proximity sensor test apps on play store too.
appsmarsterx said:
the issue might be your proximity sensor's alignment. it might not have aligned properly. there is a small black rubber holder to hold the proximity sensor. may be you might be missing it or might have loosen it. you can easily fix/align it, if you can open the back cover.
you can install a custom rom to overcome this sudden screen off issue. but when you taking a call your screen will be turning off until other user disconnect the call..
I suggest you fix/align the proximity sensor..
P.S:
There is a small troubleshooting step you can do to see whether your proximity sensor has a slight alignment issue. get a torch or good direct light source and point it directly at proximity sensor. if you can turn your screen on while pointing that light towards proximity sensor, you should have a very small alignment issue. there are plenty of proximity sensor test apps on play store too.
Click to expand...
Click to collapse
Interseting... My screen broke so I had it replaced and its been having an issue ever since. Also, I don't use it for calls. It is just sitting on a mount in my car most of the day running a few car apps. But it is in airplane mode basically all day lol.
Pr3dict said:
Interseting... My screen broke so I had it replaced and its been having an issue ever since. Also, I don't use it for calls. It is just sitting on a mount in my car most of the day running a few car apps. But it is in airplane mode basically all day lol.
Click to expand...
Click to collapse
that makes sense.. you also replced front housing too right? that's where that rubber proximity sensor holder attached.. if you replace original front housing with aftermarket housing that rubber holder probably won't come with it. most of the repair technicians don't know this.. if you still have the old front housing you should be able to recover it and attach to your new housing..
p. s:
or you should be able to buy it.
here it is
http://rounded.com/lg-g2-d802-rubber-proximity-sensor-module-mbl65540401.html#/product/21920 (also try ebay or aliexpress )
appsmarsterx said:
that makes sense.. you also replced front housing too right? that's where that rubber proximity sensor holder attached.. if you replace original front housing with aftermarket housing that rubber holder probably won't come with it. most of the repair technicians don't know this.. if you still have the old front housing you should be able to recover it and attach to your new housing..
p. s:
or you should be able to buy it.
here it is (also try ebay or aliexpress )
Click to expand...
Click to collapse
Honestly, if its possible I'd rather just disable it completely. I'd rather not open the phone up again if I don't have to and I will never use it for calls anyway.
Pr3dict said:
Honestly, if its possible I'd rather just disable it completely. I'd rather not open the phone up again if I don't have to and I will never use it for calls anyway.
Click to expand...
Click to collapse
if you're not using your g2 for calls, I'd recommend flashing a custom aosp rom. so you wouldn't get in to this sudden screen off issue while unlocking it..
appsmarsterx said:
if you're not using your g2 for calls, I'd recommend flashing a custom aosp rom. so you wouldn't get in to this sudden screen off issue while unlocking it..
Click to expand...
Click to collapse
That sounds exciting.. Lets do it!!!!!!!!!!!!