[Q] Hard-SPL and USPL for HTC ELF - Touch GSM General

I really hope someone can help me.
I got this phone from a friend of mine, so i wanna pimp it without breaking it.
I am still not totally clear on the Hard-SPL and USPL.
I got the Elf 64/128.
original SPL: : 1.11.0000
I want to flash to Onyx WM 6.5
I read somewhere on this forum that i need to use the USPL first.
I already got the ELF USPL patched 1.19.0000SPL now ready to be installed.
Is this correct?
And can i install an Hard-SPL after that? or isnt that really necessary?
If so, does it matter wich one i use for HARD-SPL?
for example the 2.27.0000 i think it was.
I know, a lot of questions, but it would really help me out here
Thanx in advance

Hi
If you read this carefully http://forum.xda-developers.com/showthread.php?t=408637 you have to use first Uspl 1.xx then upgrade to Uspl 2.xx and then Hard Spl from here http://forum.xda-developers.com/showthread.php?t=445666.
Good luck

Related

hard spl?

im tryin to out a rom on my wing and the instructions tell me
"This will update your Herald p4350 to The latest Touch-IT wwe version
DO NOT FLASH YOUR DEVICE WITH THIS IF YOU HAVE NOT UPDATED YOUR HERALD WITH HARD-SPL
If you try without hard-spl, your update will fail."
i have no clue what hard spl is can anyone help?
maybe sometimes it helps to read the threads in every heraldsubforum....
For example....
http://forum.xda-developers.com/showpost.php?p=1782210&postcount=206
and the hole thread
"Hard_SPl or how not......." in Herald uprading.
And READ, READ, READ
unpapi_4u said:
im tryin to out a rom on my wing and the instructions tell me
"This will update your Herald p4350 to The latest Touch-IT wwe version
DO NOT FLASH YOUR DEVICE WITH THIS IF YOU HAVE NOT UPDATED YOUR HERALD WITH HARD-SPL
If you try without hard-spl, your update will fail."
i have no clue what hard spl is can anyone help?
Click to expand...
Click to collapse
thanx it worked but how do u put it back to a stock ruu?
i'm not perfectly familiar with the hard-spl process, but wouldn't you just run it normally?
My question is if it's possible to flash Itje's rom that says "Hard-SPL only" with USPL?
fzzyrn said:
i'm not perfectly familiar with the hard-spl process, but wouldn't you just run it normally?
My question is if it's possible to flash Itje's rom that says "Hard-SPL only" with USPL?
Click to expand...
Click to collapse
Used USPL and it works perfectly on my non hard spl'ed wing.
yeah i could put a hard spl on it but i wanna put back to stock.....can some one help me do that?
HardSPL - it's SPL(bios).
You cant get back your stock SPL
damm that sucks.....
anyone recomend any hard spl roms for the wing?
unpapi_4u said:
damm that sucks.....
anyone recomend any hard spl roms for the wing?
Click to expand...
Click to collapse
All of them. HardSPL means that you're not tied to ANY particular ROM.

DOPOD C800 WM6 Upgrade Problem--help me

Hi guys,
I tried to upgrade my Dopod C800 with Official WM6 ROM for HTC P4350(HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe)
But i get ** invalid vendor Id error*** and stops upgrading.
My dopod C800 details is
SPL 1.09.0001
IPL 1.09.0001
ROM 1.7.707.3 WWE
ROM Date 11/01/06
Radio 2.69.90
protocol 4.1.13.30
Ext rom 1.7.707.106
OS 1.7.0.0
Pls help me to upgrade my dopod C800.
Thanks
Jose.
This is because the Dopod acutally never released a WM6 for your device. I too own a Dopod C800.
See this thread. This will upgrade your device to WM6 and will also make it hard SPL. After that you can(if you wish), upgrade to the cooked ROMs around too
And hey! do follow the instructions carefully
kdskamal said:
This is because the Dopod acutally never released a WM6 for your device. I too own a Dopod C800.
See this thread. This will upgrade your device to WM6 and will also make it hard SPL. After that you can(if you wish), upgrade to the cooked ROMs around too
And hey! do follow the instructions carefully
Click to expand...
Click to collapse
You had a working phone after flashing HardSPL on a phone with:
SPL 1.09.0001
IPL 1.09.0001
???
Hi Thanks for the reply.
Pls help me which method i should follow.
Method 1)
1) Use HERALD-USPL-beta3.zip or Hard-SPL-Herald.zip --which one i have to sellect?
and then flash with
2)
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_ Ship.exe
or
Method 2)
1) Use HardSpl_WM6.rar or herald_wm6.rar
2) do i need to flash with officila HTC ROM or the above will contain WM6?
thanks
Jose
ivanmmj said:
You had a working phone after flashing HardSPL on a phone with:
SPL 1.09.0001
IPL 1.09.0001
???
Click to expand...
Click to collapse
Yes, it acutally got upgraded to..
ipl 4.17.0001
spl 4.70.Yang
you're verry verry lucky
almost everybody bricks his device wirh spl 1.xxxxxx
bdevogt said:
you're verry verry lucky
almost everybody bricks his device wirh spl 1.xxxxxx
Click to expand...
Click to collapse
GF luck?
Upgrade to w6.0 for dopod c800
Hi Mjose,
were you ever able to upgrade to 6.0??
I have a Dopod c800 with the same specs as yours. If you were successful in getting 6.0 onto it, will you please share the process and required files with me??
pls explain how do u upgrade your 1.xxxxxx phone to YANG spl
I too have the same specs for my device....c800
I want to upgrade it to win 6....please help
i want to know the procedure to upgrade my device

htc touch viva not upgrading to Wm6.5

Dear fellows i tried many roms provided on this site under opal forum but it gives error image file corrupted.
is my device locked or i am missing some procedure please guide
First of all you should do hard spl. Hard spl is present at the top of opal rom development. After successful hard spl, you can install any rom.
i tested the same rom it do upgraded the same version
same rom works y not 6.5 is it offical 1 or created privately
mirchichamu thanks it got installed after hard spl
what actually hard spl does
?
[email protected] said:
what actually hard spl does
?
Click to expand...
Click to collapse
Happy that your problem solved. Please see the following page for answer of your question:
http://forum.xda-developers.com/showthread.php?t=446446&page=3

[Q]Using a shipped ROM with a CID-unlocked device

First of All I want to thank everybody in this forum I've learned a LOT from you guys..
I have a question though.. does flashing a SHIPPED ROM (not a DUMPED ROM) after CID-unlocking the device with HardSPL causes the device to brick??
In other words.. does a shipped ROM contain SPL?? cause I read that HardSPL cannot be overwritten so that may brick the device..
Sorry if that question has been answered before.. I tried the WIKI but I couldn't get a definite answer..
Thanks in advance..
Fa7my said:
First of All I want to thank everybody in this forum I've learned a LOT from you guys..
I have a question though.. does flashing a SHIPPED ROM (not a DUMPED ROM) after CID-unlocking the device with HardSPL causes the device to brick??
In other words.. does a shipped ROM contain SPL?? cause I read that HardSPL cannot be overwritten so that may brick the device..
Sorry if that question has been answered before.. I tried the WIKI but I couldn't get a definite answer..
Thanks in advance..
Click to expand...
Click to collapse
All shipped ROMs contain an SPL.
If you have a Hard SPL it will not allow flashing of ROMs with built-in SPLs. That's the point of it being called a HARD SPL.
If you have the USPL instead of Hard SPL it will allow flashing of ROMs with built-in SPLs (but not safe).
If you don't have any USPL/Hard SPL, but just the stock SPL and you use the white screen method instead to flash, it's even less safer AND NOT RECOMMENDED.. because, if you brick your device you won't be able to flash anything from Bootloader since you only have the original SPL.
The white screen method is only used to flash the USPL or Hard SPL. If you have a Hard SPL, the white screen method is the only way to downgrade to another SPL.
You can remove the SPL from the shipped ROM though.. (i.e. use NBHextract.exe to grab all the components then rebuild just the OS.nb with HTC ROM Tool).
For more questions, just search or post in the correct thread.
thnx dsixda.. u r the best
can someone add the bloody response from dsixda to the roll up thread or something?? maybe it will save sometime for the n00bs (and for the rest of us too).
good day sir...
so by using this (i.e. use NBHextract.exe to grab all the components then rebuild just the OS.nb with HTC ROM Tool) is the safest way to downgrade lets say from WM 6.5 to WM 6 ?
I'm downloading this file:
RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe
Device: ELF0100*0
CID: DOPOD001
Version: 2.20.707.1B
Language: USA
for my:
Touch version : Elfin
Device ID : ELF010050
CID : DOPOD001
IPL : 3.10.0002
SPL : 3.10.0000
I used NBHextract.exe to extract the files to make ROM my question is should I add the ext_ROM or just the OS coz If I want to revert back to its original state I can flash it with this "original" OS.
-by the way what OS version is this : RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe
WM 6.0 or WM 6.1? thanks

Hard SPL Qtek 9000 Question

Hello all,
In my searches i see that before install any cooked ROM you must use Hard SPL, and there is dedicaded ones for especific machine (maybe im wrong).
Is there a Hard SPL for Qtek9000?
Thank you.
No HardSPL is required for the HTC Universal
(it was built before HTC put in the copy-protection that made using a HardSPL necessary)
Thank you very much. I will then procede with new ROM
If any doubt have a read on my signature link

Categories

Resources