Related
using pof herald beta tool,I decompiled c800 .nbh file,and rebuild it into a herald ruu file,successful write into my p4350,but badly,my herald bricked....
only can start with bootloader..
ipl remain: 4.17.0002(herald wm6 ipl)
but spl become: 1.09.0002(c800's spl)
I try to flash original rom that I used before,but it didn't work by ERROR300,and ppc screen stop at 0%. I TRY any ruu I can find,wm5 wm6,but the same ERROR300.
what can I do? is there any way to go?? or I have to change the flasher?
thanks all,plz help
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
pof said:
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
Click to expand...
Click to collapse
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
when I bought this,It display IPL 5.04.0002 SPL 5.04.0000 ,which rom can I use to fix???
plz give me one.thanks pof
by the way, which cid am I have now? htc p4350 or dopod c800?????
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
duprade said:
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
Click to expand...
Click to collapse
my phone is actually htc herald,no doubt of this,but I bricked it when I change the SPL IPL.... so the SPL had become wrong.
pof,,,,it really became no way out,I think I should go to the shop,and repair it with a new flasher.
I had tried all the language I can found on wiki and web. none of them can work.
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe (can use beforetime)
EURORUU_Herald_HTC_NOR_5[1].4.409.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe
ruu_herald_htc_dan_5[1].4.403.2_4.1.13.34_02.79.90_ship.exe
RUU_Herald_HTC_GER_5[1].4.407.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_RUS_1.8.411.3_02.71.90_Ship.exe
RUU_Herald_HTC_RUS_5.4.411.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_SPA_5[1].4.412.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
HTC_P4350_ITA_4[1].17.408.2_4.1.13.44_02.94.90_Ship.exe
HTC_P4350_WWE_4[1].17.405.2_4.1.13.44_02.94.90_Ship.exe(can use beforetime)
so sad..
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
itje said:
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
Click to expand...
Click to collapse
thank you all the same,but I don't have any problem with what you said.
okay thats good
crappy stuff, bricking
itje said:
okay thats good
crappy stuff, bricking
Click to expand...
Click to collapse
yes,thanks.
I would like to know if I change the flasher,can I make the trouble shoot?
didn't think it was possible to brick a herald. def gonna b more carefull now
yangchao8115 said:
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
Click to expand...
Click to collapse
me too and tried many rom but fail erro 300 0% stop IPL AND SPL 1.08.001 . it was died and waiting for new unbrick way
wooo...cost me 400rmb to make it repaired,changed a flasher and I now the make my herald superCID . after repaired I used the SDcard to flash the wm6ruu (using the file named heraimg.nbh on sdcard) .whatever it's ok now thanks everyone
ok.do it in your ways.I don't need to do so many things and to be a thief even I don't own a herald.
happy now?
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
itje said:
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
Click to expand...
Click to collapse
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
canonyang_China said:
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
Click to expand...
Click to collapse
a
when will it be available then?
itje said:
a
when will it be available then?
Click to expand...
Click to collapse
I don't know.you should ask olipro.
IF you are T-WING or VADEFONE or HTC 4350 no need to unlock.just use JumpSPL by pof to flash your SPLASH EXTROM OS,but don't do anything else.
JUMPSPL,jump into 0x10000000,then flash with ROMUpdateUtility.exe to flash NBH file.
NBH file can make youself by using HTCRT.exe.
SPLASH file can make youself by using SplashScreen.exe
EXTROM you can edit it with winimage.
cheer.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Help Link Doesnt Work
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
thanks!!!!great work!i think very much people want to use it ~~~~~~~~~`
lxa786 said:
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
Click to expand...
Click to collapse
use proxy http://www.ok-proxy.com/ enter the link into it.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Click to expand...
Click to collapse
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:
Click to expand...
Click to collapse
hdubli said:
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:
Click to expand...
Click to collapse
MAYBE that a way.I know that the spl ipl must be suit for the radio or it will not boot,will gone black screen.
I do want to confirm something.
first,you mean flash high SPL IPL like WM6 one totally NBH via Jumpspl?
second,Jumpspl to flash,if you succeed.the device will boot normally?
third,after you flash,which cid do you have?(check in MTTY or try to flash the ruu which you get the NBH)
fourth,if I want to try,maybe I would like to make a nbh with hard-spl to flash.after all,it cid unlock,and we can do something more if it failed.
cheer
Click to expand...
Click to collapse
papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
yangyqh said:
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
Click to expand...
Click to collapse
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
canonyang_China said:
use proxy http://www.ok-proxy.com/ enter the link into it.
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Click to expand...
Click to collapse
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
zubi1984 said:
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
Click to expand...
Click to collapse
If you are htc p4350,don't worry about anything.follow my steps:
1,Take off your battery to get you SN.
2,GO TO www.htc.com
3,Mouse action to E-CLUB icon.
4,Join is member with your SN,then login on.
5,You will see "Phone Software Updates" follow it and you will get a Offical RUU cid suit your device.
6,After downloaded,RUN the RUU and your device will back to life.your IPL SPL will change into 4.17.your os will be wm6.
7,if you can't find anything in "Phone Software Updates".please try all the WM6 RUU for HTCP4350 in the first post to find one suit for you cid.try the WWE one first.
cheer
exxi said:
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
Click to expand...
Click to collapse
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system!
Tell the people around you:Taiwan is a province of China!!!
cheer for you
yangyqh said:
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system!
Click to expand...
Click to collapse
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
edzilla said:
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
Click to expand...
Click to collapse
yep,you are right
Hello all,
I recently purchased HD2, the first thing I did was going to HTC website and downloaded the latest ROM Version: 1.66.415.3, now my SPL version is 1.66000 XE. I searched the forum before posting this thread, but I did not find a clear post that answers my questions, and I am still a newbie in modding field, so please bare with me.
This ROM includes Arabic language support which I need, but its quite bugged, in away that most of the menus are in Arabic now, and even though I chose from the settings to have them in English, even disabling multi-language support wouldn't change the menus to English and they still are in Arabic.
More over some bugs, like the Arabic supported Keyboard will always play a very high click sounds, even if I reduce the volume, put it on Silent or Vibration, everything will be silent except for the Arabic Keyboard would still play the clicks.
So i thought there must be a fix for it, and the best possible way to do it in my opinion is Via installing HSPL, now the problem is I can no where find how I am able to Roll back to SPL 1.42 so that I can install HSPL, since i have SPL 1.66, So my question is, Does anyone know how and where can I roll back to SPL 1.42 so that I can install HSPL ?
My second question, Is there any Custom Rom that have full Arabic support meaning I can type and read Arabic Websites/Messeging/Email/MMS and such ? I saw Seatone's ROM that indicates Arabic Support, but I cant find anywhere to what extent it is ?
My third question is after rolling back to SPL 1.42 from SPL 1.66 and installing HSPL (assuming that this process is possible), Can I update to Newer SPL and still have HSPL installed ? or I would have to remove the HSPL in order to update my SPL ?
My last question is regarding RADIOS, can I install multiple RADIOS or I can only have one installed at a time ? Also for Backing up my ROM on my device (assuming I dont have the software on the PC), how do I do it ?
Eventually thanks for your time and consideration to help me in this matter, looking forward to hear some answers !!
All the official roms can be download here.
http://rapidshare.com/users/258XUJ
once download, I think you can just follow the procedures for removing HSPL to put it back to a standard factory state.
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
BAZ007 said:
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
Click to expand...
Click to collapse
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
fyase said:
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Click to expand...
Click to collapse
Oh thanks alot, explains much, Do you have any idea about my other questions ?
Is there any Custom Rom that have full Arabic support meaning I can type and read Arabic Websites/Messeging/Email/MMS and such ? I saw Seatone's ROM that indicates Arabic Support, but I cant find anywhere to what extent it is ?
After rolling back to SPL 1.42 from SPL 1.66 and installing HSPL (assuming that this process is possible), Can I update to Newer SPL and still have HSPL installed ? or I would have to remove the HSPL in order to update my SPL ?
My last question is regarding RADIOS, can I install multiple RADIOS or I can only have one installed at a time ? Also for Backing up my ROM on my device (assuming I dont have the software on the PC), how do I do it ?
Thanks alot in advance ...
BAZ007 said:
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
Click to expand...
Click to collapse
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Help
Good Night.
I have a HTC HD2 with the 1.66.0000 XE SPL, and with the following ROM "RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship"
Because i update the ROM from the HTC Website, and it gave me that ROM, after i update it i notice that it is in NLD (Nederland), now i want to install other ROM and i Can't.
I want to do HSPL but to do that i need the SPL-1.42.000, to have that SPL i have tried to install other ROMS, but it had failed all the times with the following Error ("ERROR [294] : INVALID VENDOR ID ").
Need some help with this, because e don't understand NLD (LOL), and i want to install a PTG ROM.
.
Can anyone give me a hand? I have Telstra HD2 using on ATT in the U.S. and flashed to this ROM
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
When I check the bootloader it says
SPL-1.42.HSPL
However when I try to HSPL it says.
You must have SPL 1.42.0000 and errors out. I read that if I flash any shipped OEM ROM it'll put it back to 1.42.0000 but it doesn't appear to be doing that.
Any help would be appreciated I'm trying to get any HSPL on this thing. I've also tried HSPL2 to no avail. It said bad ID or something.
Thank you in advance.
juiceppc said:
Can anyone give me a hand? I have Telstra HD2 using on ATT in the U.S. and flashed to this ROM
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
When I check the bootloader it says
SPL-1.42.HSPL
However when I try to HSPL it says.
You must have SPL 1.42.0000 and errors out. I read that if I flash any shipped OEM ROM it'll put it back to 1.42.0000 but it doesn't appear to be doing that.
Click to expand...
Click to collapse
1.42.hspl means hspl is installed, it MUST have been installed for you to flash that wwe rom.
flash what you want using usb and job done.you are seeing a problem that doesn't exist
Any help would be appreciated I'm trying to get any HSPL on this thing. I've also tried HSPL2 to no avail. It said bad ID or something.
Thank you in advance.
Click to expand...
Click to collapse
hspl2 doesnt work on telstra.
samsamuel said:
1.42.hspl means hspl is installed, it MUST have been installed for you to flash that wwe rom.
flash what you want using usb and job done.you are seeing a problem that doesn't exist
hspl2 doesnt work on telstra.
Click to expand...
Click to collapse
Thank you! I didn't even think to try. It worked. GTX right now!
fyase said:
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Click to expand...
Click to collapse
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Valenzuela said:
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Click to expand...
Click to collapse
You will want the WWE (World Wide English) Rom, it is there on that rapidshare link that was posted earlier .....
Valenzuela said:
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Click to expand...
Click to collapse
watcher64 said:
You will want the WWE (World Wide English) Rom, it is there on that rapidshare link that was posted earlier .....
Click to expand...
Click to collapse
STOP
when you say "us hd2" do you mean a tmous? t mobile us? because if yes, then those roms will kill your phone.
ONLY flash tmobile roms or tmous compatible cooked roms to a tmous.
hey.i really need help with this im New A THIS ...I JUST WNT TO FLASH MY HD2 BACK TO SPL 1.42.0000 .TO FLASH DROID ON IT..CAN SOMEONE PLZ HELP ME..JUST TELL ME WAT TO DOWNLOAD IN WERE TO GET EVERY THING ELSE THANK YOU...
Flashing from 2.10.000 to 1.43
Trying to flash a TMO HTC HD2 and I keep getting an update error 262.
ERROR [262, 276, 284, 302] : UPDATE ERROR
I have tried doing the soft reset 5 times now and I keep getting the same error. Am I doing something wrong that I am not seeing?
konspiracy said:
Trying to flash a TMO HTC HD2 and I keep getting an update error 262.
ERROR [262, 276, 284, 302] : UPDATE ERROR
I have tried doing the soft reset 5 times now and I keep getting the same error. Am I doing something wrong that I am not seeing?
Click to expand...
Click to collapse
There are NO 1.43 roms that will work on your tmous, you WILL permanently destroy it if you do manage to flash one. The tmous will ONLY take roms version 2.x or higher
you are very lucky that you dont have hspl installed, else it would let you flash, and your phone would be dead.
So what do we do if we have tmous and want to install HSPL?
orange_penguin said:
So what do we do if we have tmous and want to install HSPL?
Click to expand...
Click to collapse
use hspl3.
RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed_15.33.50 .07U_2.07.50.27_2_Test
OK I DID I RIGHT NOW...
Have branded Vodafone UK
Can't even flash back to Vodafone UK stock rom...
can't go back to HardSPL...
release was good...
phone doesnt work anymore...
flashed from sdcard.... after testing it...
i have just forgotten about hspl... and my branding...
after flashing... from sd
-> beppe hspl deleted -> PHONE BRANDED -> Not bootable NOT WORKING!
upgrade ROM code error
please try again
please... someone help me... hmm develop new HSPL [/QUOTE]
OK SOLVED BUT REMEMBER:
Flashed to RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed_15.33.50 .07U_2.07.50.27_2_Test THERE IS NO WAY BACK!!! you will have to stay with this rom until hspl 2 comes out!!!
IF YOU HAVE BAD LUCK, LIKE I DID, YOU WONT BE ABLE TO FLASH !ANY! OTHER ROM... NOT FROM SD CARD, GOLDCARD, USB, SSPL!
Click to expand...
Click to collapse
Yes i tried it with my goldcard... nada... otherwise i wouldn#t open this thread...
Custom RUUs... mtty... .exe usb... .nbh sdcard... everything
Same problem here bro!
Mine did work, but I accedently opeend the exe from 1.66 test rom and got this problem.
No I'm hoping that flashing 1.66 NLD will give me my phone back.
Otherwise MTTY
Fard succesfully flashed rom + custom rom using SPL 2.07
Edit:
1.66 NLD didn't work aswell
0028002 NOT Allowed it is saying to me.
xmoo said:
Same problem here bro!
Mine did work, but I accedently opeend the exe from 1.66 test rom and got this problem.
No I'm hoping that flashing 1.66 NLD will give me my phone back.
Otherwise MTTY
Fard succesfully flashed rom + custom rom using SPL 2.07
Edit:
1.66 NLD didn't work aswell
Click to expand...
Click to collapse
damn...
can#t sleep... need a beer...
a coldcard... maybe mine isnt gold anymore
Is there any way to make a goldcard without a hd2???
I already have the goldcard.img for my sd... my brother is sending his... maybe it will work...
ctman said:
damn...
can#t sleep... need a beer...
a coldcard... maybe mine isnt gold anymore
Is there any way to make a goldcard without a hd2???
I already have the goldcard.img for my sd... my brother is sending his... maybe it will work...
Click to expand...
Click to collapse
nope goldcard is serial related. I tried 3 of mine goldcards, still the same issue....
Gonna try wwe 1.66, The spl 2.07 vendor locks you, but now you have to find the correct rom tht get's accepted
flashing with sspl?
HD2Owner said:
flashing with sspl?
Click to expand...
Click to collapse
The thing is the screen shows the Trianlge.
And in Bootloader it says you need to upgrade rom.
But when you try to update it reboots at 1% giving diffrent errors.
xmoo said:
nope goldcard is serial related. I tried 3 of mine goldcards, still the same issue....
Gonna try wwe 1.66, The spl 2.07 vendor locks you, but now you have to find the correct rom tht get's accepted
Click to expand...
Click to collapse
had this problem yesterday, too... something went wrong flashing...
only through htc hotline i have found out: my phone is vodafone uk branded... and i didn't check my goldcard... maybe i deleted gold status some time ago...
THERE MUST BE A WAY TO MAKE A GOLDCARD WITHOUT THE HD2!
can you install a official 1.66-rom with sdcard-method and apply hardspl afterwards?
i guess the problem is: there is no 1.42-spl-rom for the TMOUS-CID......
HX-BC
SPL-2.07.000 8G XE
MicroP-Wrong Platform(0x1)
MicroP(Touch) 0x30
Bootloader status.
1.66 WWE didn't work... So I think MTTY is only option?
why didn't you just re-cook the 2.07-rom and use it with Hardspl???
new 2.07spl not needed. everything works with 1.42hspl.......
HD2Owner said:
why didn't you just re-cook the 2.07-rom and use it with Hardspl???
new 2.07spl not needed. everything works with 1.42hspl.......
Click to expand...
Click to collapse
SPL 2.0 gave me good battery life in 2.02, so that's why I wanted to upgrade SPL aswell.
Something went wrong during flash.
Cause fard even custom flashed spl 2.07, but he's sleeping now.....
hope we'll see a 2.0XHSPL soon....
Dont know if i can ever save my phone....
to HSPL you need a working... booting phone with 1.4 spl
MY hone is branded, too... and vodafone uk stopped hd2 sales and development... still 1.43 latest rom...
any suggestions? tried 20 roms... .exe / extracted via custom ruu-sspl .... and i tried the mtty... ... nothing
cant even flash back to my original branded rom...
any way making a goldcard with damaged HD2?!??
ctman said:
Dont know if i can ever save my phone....
to HSPL you need a working... booting phone with 1.4 spl
MY hone is branded, too... and vodafone uk stopped hd2 sales and development... still 1.43 latest rom...
any suggestions? tried 20 roms... .exe / extracted via custom ruu-sspl ....
any way making a goldcard with damaged HD2?!??
Click to expand...
Click to collapse
Fards know how to make a goldcard, but you have to wait a day.
If you don't have time for waiting use mtty....
One more thing to try is to flash TMOUS 2.01 or 2.02 and see if they can be flashed!!!!!
If they can beflashed, and i remember correct, they can be overwritten with the old hardspl afterwards.
Good luck!
smaberg said:
One more thing to try is to flash TMOUS 2.01 or 2.02 and see if they can be flashed!!!!!
If they can beflashed, and i remember correct, they can be overwritten with the old hardspl afterwards.
Good luck!
Click to expand...
Click to collapse
Already tried, but no succes.
I've been stuck with SPL-2.0 for a while now myself. Nothing gets it off including multiple goldcard attempts and full flashing of stock roms. It seems like it's there to stay, at least until we get a HSPL2.0 which I'm waiting for.
My radio version is stuck where it is but I can upgrade firmwares using SSPL which is nice. I just flashed Miri's latest 2.05 and everything works fine. Still, I hate having my SPL locked down like this.
balane said:
I've been stuck with SPL-2.0 for a while now myself. Nothing gets it off including multiple goldcard attempts and full flashing of stock roms. It seems like it's there to stay, at least until we get a HSPL2.0 which I'm waiting for.
My radio version is stuck where it is but I can upgrade firmwares using SSPL which is nice. I just flashed Miri's latest 2.05 and everything works fine. Still, I hate having my SPL locked down like this.
Click to expand...
Click to collapse
I had no problems flashing diffrent roms and spl's.
Was on 1.43, 1.48, 1.66, 2.00, but now i'm stuck @ 2.07
I really hope someone can help me.
I got this phone from a friend of mine, so i wanna pimp it without breaking it.
I am still not totally clear on the Hard-SPL and USPL.
I got the Elf 64/128.
original SPL: : 1.11.0000
I want to flash to Onyx WM 6.5
I read somewhere on this forum that i need to use the USPL first.
I already got the ELF USPL patched 1.19.0000SPL now ready to be installed.
Is this correct?
And can i install an Hard-SPL after that? or isnt that really necessary?
If so, does it matter wich one i use for HARD-SPL?
for example the 2.27.0000 i think it was.
I know, a lot of questions, but it would really help me out here
Thanx in advance
Hi
If you read this carefully http://forum.xda-developers.com/showthread.php?t=408637 you have to use first Uspl 1.xx then upgrade to Uspl 2.xx and then Hard Spl from here http://forum.xda-developers.com/showthread.php?t=445666.
Good luck