Database Users

Help needed.. Phones stuck on HTC start up screen

Hi guyz,
I flashed the Leon ROM in the morning. After the flash the phone was stuck on the HTC logo. After a soft reset it loaded up and everything worked perfectly. I really liked the LEON ROM so I kept it and started syncing all the stuff from my PC.. I was playing with it a few hours.
I added some albums to my SD card and was updating the music player when it crashed and reset itself.
I can't get past the HTC screen again. I tried everything, soft reset, with and without the SD card, without SIM, taking out the battery but it's stuck.
Can you guyz tell me what it is or of any of u had the same and how u sorted it out?
If nothing helps what can I do? Can I still flash the official ROM or should I re-flash LEON?
Hope it can be sorted without exchanging it or repair.
Thanks very much
Suz
----------------------
SPL 1.42 HardSPL by bepe and Cotulla
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.4 WWE
ROM Date: 02/19/10
Radio Version: 2.05.51.05_2
Protocol Version: 15.28.50.07U

DId you hard reset after the flash finished? Have you flashed a few roms? Have you task 29/mtty'd?
What radio?

samsamuel said:
DId you hard reset after the flash finished? Have you flashed a few roms? Have you task 29/mtty'd?
What radio?
Click to expand...
Click to collapse
1. Yes
2. No (just 2)
3. I am on in rite now.

Can I just flash a new ROM over it? Should work rite?

Yep, sure, boot to bootloader, wait for 'serial' to become 'usb' and run customruu.exe to flash.

Thanks very much for your help..
xxx

I am a HD2 owner for two days now. I used to flash much with my HD1, so I couldn't resist any more and started flashing two hours ago.
Same thing happend to me after flashing and a soft reset. Only the white HTC screen came up (at first I sh*t my pants, I was afraid I bricked it for real ). I tried several things..
Everytime when I reflashed the device it was working again, until I did a soft reset, after that evertime I was greeted with the white HTC screen.
After searching for a while on XDA I found somebody stating that the RADIO could be the problem. I never had booting problmens with differrent radio's with my HD1. But for the HD2 this is different I assume.
My solution was:
- Go to: http://forum.xda-developers.com/showthread.php?t=611787
- download radio: Leo_RADIO_15.34.50.07U_2.08.50.08
- Place the radio (make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe (download here: http://forum.xda-developers.com/showpost.php?p=4798017&postcount=1 )
- turn off HD2
- press and hold volume down button and press power on
- when the tricolor screen appears, plug in the USB cable and wait for the screen to say 'USB'
- Run LeoCustomRUU.exe and follow on screen instructions
- Wait for the process to complete
With this new radio my device started booting again Let me know if this fixed your problem!

wtfbbq said:
I am a HD2 owner for two days now. I used to flash much with my HD1, so I couldn't resist any more and started flashing two hours ago.
Same thing happend to me after flashing and a soft reset. Only the white HTC screen came up (at first I sh*t my pants, I was afraid I bricked it for real ). I tried several things..
Everytime when I reflashed the device it was working again, until I did a soft reset, after that evertime I was greeted with the white HTC screen.
After searching for a while on XDA I found somebody stating that the RADIO could be the problem. I never had booting problmens with differrent radio's with my HD1. But for the HD2 this is different I assume.
My solution was:
- Go to:
- download radio: Leo_RADIO_15.34.50.07U_2.08.50.08
- Place the radio (make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe
- turn off HD2
- press and hold volume down button and press power on
- when the tricolor screen appears, plug in the USB cable and wait for the screen to say 'USB'
- Run LeoCustomRUU.exe and follow on screen instructions
- Wait for the process to complete
With this new radio my device started booting again Let me know if this fixed your problem!
Click to expand...
Click to collapse
Damn it! I wish I read this sooner.. I tried to flash the updated version of LEON 1.5 but nothing changed.. Now I'm flashing the original ROM 1.48.
I will run task 29 afterwards and try LEON 1.5 again. If it ain't working after that I will try the radio thingy .. Have to look up the radio stuff coz I'm still confused.. ehm..
Thanks so much for your help.. I appreciate it..

I ran the TASK 29 Radio 2.08.50.05. After that I re-flashed LEON v1.5 and it works. I tried to soft reset just to make sure and it loaded up.
So happy. Thanks very much for your help.
--------------------------
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.5 WWE
ROM Date: 25/03/10
Radio Version: 2.08.50.05

SinFire said:
I ran the TASK 29 Radio 2.08.50.05. After that I re-flashed LEON v1.5 and it works. I tried to soft reset just to make sure and it loaded up.
So happy. Thanks very much for your help.
--------------------------
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.5 WWE
ROM Date: 25/03/10
Radio Version: 2.08.50.05
Click to expand...
Click to collapse
i dont mean to sound pedantic but it LEO

djchubbs said:
i dont mean to sound pedantic but it LEO
Click to expand...
Click to collapse
nah.. it doesn't sound pedantic.. LOL.. LEON as in the ROM LEON.. not the phone... heh

wtfbbq said:
....(make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe
Click to expand...
Click to collapse
The name is so of no importance! i can even call fu**er.nbh if i want to, Custom_RUU will still update it. As long as both files are in the same folder nothing else matters. If you don't believe me, then just go ahead and try it yourself

screen of dead - white screen

hi
needs some help here.
when i ran superhd2, it just went 2 black screen, it was not first time i tried this, so i took out the battery and then put it in again, but now it won't boot up again. when i turn it on it only shows a white screen, have aslo tried this before, but then i just soft reset it a couple of times and then it worked again.
have tried to flash a new rom in bootlaoder, but could't falsh a stok rom, it failed. Also tried task29. but task 29 not working it stuck on 0%.
what can i more try to fix it

fischerben said:
hi
needs some help here.
when i ran superhd2, it just went 2 black screen, it was not first time i tried this, so i took out the battery and then put it in again, but now it won't boot up again. when i turn it on it only shows a white screen, have aslo tried this before, but then i just soft reset it a couple of times and then it worked again.
have tried to flash a new rom in bootlaoder, but could't falsh a stok rom, it failed. Also tried task29. but task 29 not working it stuck on 0%.
what can i more try to fix it
Click to expand...
Click to collapse
you haven't given any details about your phone whether its a eu or us version also what radio or hspl you are using.
id say 1st step, try to update hspl, select 2.08 then try task 29 again

sorry
eu version
Radio: 2.15.50.14
WinMo: OzDROID ROM 2.00
Android SuperHD2_v14
kernel 8.5
hspl3 2.08

tried to flash task29 from sd card and that worked, but didn't help. i can't still install a stock rom, but can install for example Ozdroid but that don't help much, it still white screen when i turn it on

I had something similar I ended up sending it for repair and got a new phone as they were unable to remedy the problem. Maybe you will need to do the same.

oki, but what about when it is HSPL and warranty.
it could be nice to flash it to stock rom first, before sending it in. but it says fail when it comes to Radio_v2 on installation from sd card

[Q][Help] Hanging HTC Screen After Flashing MAGLDR113

Hi, I have HD2 , and i would like to install the wm7 in this mobile... i followed instructions posted in the xda-dev pages.. after i did the instruction Installing the MAGLDR113, its stucked on the HTC Bootscreen...even i press the power button for long time no thing happen... i tried so many times but still no luck at all... please guys help me with this..
Thanks.
Rico.
HD2 progress:
--unit Updated SPL-2.08.HSPL (done)
--unit installed MAGLDR113 (Stucked HTC BootScreen.. Option for flashing not openning)

Did you flash Leo Radio 2.15 or higher and did you put in a SD card ?

@kinaar00: whoa.. if its necessary, how can I install that? Coz my phone is stucked on the bootscreen? Yes SD card is there...Im new in this kind of thing, can you help me out? Thanks.
Rico.

Dude, i had the same problem.
Just go to the tri-color screen where you will see SPL-2.08 HSPL
There, install the 2.15 radio by downloading it from this thread: http://forum.xda-developers.com/showthread.php?t=611787 (first link of them all in the first post)
Now, just in case, reinstall magldr 1.13, now install wp7. everything shall be fine
Thank you all xda-dev community! i'm really loving my hd2/7

Thanks dude... it works!
Sent from my HTC Desire using XDA App

[Q] No Bootloader Menu after reboot

Hi folks,
I tried to flash my HTC HD2 for the first time. Read /watched different guides. In first 2 steps they were all the same:
- install HSPL
- instal MAGLDR
Done both, got positive responses on both.
BUT: after rebooting after installing MAGLDR I do not manage to get the bootloader screen. There´s just a white screen with green htc logo on it and nothing else happens.
Yes, I held the power button after reboot; about 1 min long. Nothing.
If I hold volume down button after reboot the stripey screen appears like after the HSPL installation. But there is also no menu.
Also tried to proceeed task29 with the HD2 Android NAND Toolkit. Got positive response there too and after this I begann from scratch. With the same results.
Does anyone have a clue what I made wrong or forgot?
Or a hint what to do now?
best regards
M.

What version hspl n magldr?
Sent from my LG-P999 using XDA App

and radio,
hspl MUST be 2.08.hspl ONLY
radio MUST be 2.xx.50.xx

Got hspl version 2.08.hspl from http://forum.xda-developers.com/showthread.php?t=611433
got MAGLDR version 1.13 from http://forum.xda-developers.com/showthread.php?t=893618
cant remember the full radio version but I checked it before starting and it fits to requirements.
But I´m a few steps forward...
Meanwhile I flashed the newest Original HTC HD Win Mobile 6.5 ROM so phone boots up again
After that I installed HSPL version 2.08.0000 (now I know that was a failure) an tried again to install MAGLDR. But the progress bar doesn´t move - neither on PC nor on phone...
So I first will try to install again HSPL like samsamuel said and try again with MAGLDR
[EDIT]
Radio Version is now 2.15.50.14

SOLVED
Don´t know why but after dooing all step again (after falshing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other

MiMo99 said:
Don´t know why but after dooing all step again (after flashing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
Click to expand...
Click to collapse
the only regular hd2 stock rom that includes a magldr compatible radio is 3.14, so if the ''old rom'' you flashed was any other version, it will have also flashed a non magldr radio, which is why it happened. (I suspect).
Sorted now,

the same problem
Hi,
I have the same problem.
Just white screen with green HTC mark.
But I'm not shure how to flesh win mobile again, because I cannot connect my HTC HD2 via USB (PC doesn't recognise the phone).
tnx

Hey MiMo,
Could you please post links and steps to help myself and anyone else looking on how to fix this?
by links I mean can I have the stock rom you used and the radios and such
Thank you.

[Q] Installing AmeriCanAndroid 01.11.15 keeps rebooting from splash screen

My friend who also has an HTC HD2 wanted Android. I already flashed my a few times so I (should) know the drill. I did the following steps:
- Ran Task 29
- Ran HSPL and selected HSPL 2.08
- Verified in the bootloader that it says HSPL 2.08
- Ran Magldr 1.13
- After reboot got into Magldr 1.13
- Ran the AmeriCanAndroid Setup file
- Selected USB Flasher in Magldr
- After the whole process it reboots and shows the AmeriCanAndroid splash screen
- after about 10 seconds it reboots, goes through magldr and shows the splash screen again.
It keeps rebooting. I never get to an Android screen or anything.
I tried to do the above steps multiple times, downloaded AmeriCanAndroid again to make sure I didn't had corrupted files, nothing unfortunately.
It seems this guy has the same problem.
I'm hoping I missed something stupid but can't think of anything. The only part I can think of that was different from flashes on my own phone is that his Radio was different. I had SPL 1.42.0000, he had SPL 1.62.0000. But as I'm using HSPL2 that shouldn't matter.
HSPL and MagLdr seems to work fine, and reading the forum thread the ROM seems to work fine.
Edit: I tried a different Radio (Leo_RADIO_2.15.50.14**). This doesn't seem to solve the problem either.
Edit 2: I'm gonna try the 15.01.12 Nexus HD ICS build now, maybe that one will work.
Edit 3: I've installed ClockworkMod and the Nexus HD ICS build but it still freezes at the splash screen. (it does NOT reboot tho). Seems more people have this issue with this build tho, I'm hoping bad luck twice.

it seems you're not the only one: http://forum.xda-developers.com/showpost.php?p=21508565&postcount=1292

Yes indeed, I didn't want to give the fault to the ROM (Even if it is, don't want to disrespect the effort of the builder) but it seems I really excluded every other problem it could be. I'm now looking for the 11.01.12 build, but can't find it.
Edit: I did find the 11.01.12 build SD, but no NAND.

So i have tried some more builds, latest one being the TyphooN stable 3.7.0 but no luck either. Every build seems to hang at it's splash screen. Is this a hardware issue?