Database Users

Please help me installing a new ROM

Hi All,
I have a Tmobile PPC Phone Edition (Wallaby) it was upgraded to WM2003 and was working fine and suddenly stop responding after Activesync and I had to hard reset it to make it work again.
I tried to install the XDA developers edition without luck since the program couldnt detect the USB connection. I then backed up in my SD card the oroginal OS ROM (Wm2003) and reinstalled it but after I did so I lost my Phone capabilities (does not give phone settings or the signal bar appears on the screen) and what is worst I can not do Activesync since it appears connected but is not.
Can anyone please help me? Maybe guiding me on how can I put a good ROM on my SD card and install from there? Porbably the XDA Devleoper Edition?
Thanks to all and merry Xmas and a Great 2005.

May be you can try to search on this website rather than setting up a new topic. I have seen and gone through your situation before.

Battery Pack 2 , on Jam?

I have loaded this program on my JAM, and it keeps resetting, can not use the device at all!
I DIDN'T HAVE ANY PROBLEMS WITH VERSION 1.11
Has anyone experienced the same problem? Any solution?
Thank you

It works fine on my blueangel.
You may try to hardreset your machine and install it again.

I have updated the rom and installed right after, reset and so on and still didn't work.
I have repeted this about 4 times with different ROM's
A.

Its working fine on my Qtek S100 with 1.11.00.WWE; its just a pig and insists on being installed in main memory - everytime I try to move anyof the DLLs to Storage, I have to do a hard reset..

Hi!
I am also using BatteryPackPro v.2. The problem I am facing is that sometimes when I am connected to my computer thru BT, the program memory on my Jam keeps decreasing. It keeps going down and when I disconnect it just stays at the same point till the time I do a soft reset.
Any suggestions?

there is an update 2.0.3
the update fixed the mapping of botton

PLEASE Help! Activesync won't connect and didn't back-up

Hi all -
Newbie here, so I'll apologize upfront for any errors. I've been searching for the last 6 hours and have learned a lot, but still can't fix my problem.
I tried to upgrade the radio only, but after that there is no radio version, no phone or internet, system on MDA is VERY slow, and I can't connect to active sync. I can get bootloader up, but when I try to install the factory rom I downloaded from this site, it says "no device connected." I've tried to copy it to an sd card and install from there, but that doesn't work either.
Every suggestion seems to need activesync, which I don't have. Is there a way to download and copy something to an SD card and install rom from there?
Please help. I'm out of town and without a phone.
Any help would be MUCH appreciated.
Thanks in advance!!

I have same problem
No phone, everything slow, activesync not working...
How can i install everything again if it doesnt recognize PC???
Pls help

Help me connect with pc

Hello, my friends!!
I've a problem and i'm hopping you can help me resolve it!!
Today i installed in my pc the new activesync 4.5, but i0m unable to make a connection between my S200 and the pc!! It just isn't recognized by the pc and it does'n syncronize!!!
Can anybody please help me??
Thanks in adcvance!!!

Ensure your network to the phone is not firewalled. In ZoneAlarm you have to change the phone network to "Trusted" zone.
V

Install this and try RDNIS or Serial

Hello and thanks a lot for the solutions you posted, but i have another problem!!!
When i try to install this software you gave me, my ppc simply refuses it because it says tha there is no digital signature on the program!!
Can anyone help me install this software??
Is there any way to overrunn this error message??
Thank you!!
@vijjay
I even tryed to connect it with the firewall disabeled, but i still can´t connect the ppc to activesync!!
Any other ideas??

Its weird, but usually any PPC can accept that software, tried it before with my Himalaya, Wizard and now my Prophet and all i did was install it and begin to use..
However, that error message usually happens when you have an Application Unlocked device, you can try to de-cert it first...it is really weird as i know, it only does happen with Smartphones..

Hello
This may appear crazy, but it worked for me unintentionally of course. I had given up on being able to sync via Activesync and was looking for a solution to backup my contacts before hard resetting my phone.
I had a permanent 'Synchronization Error', I just tried a piece of software posted here
http://forum.xda-developers.com/viewtopic.php?t=63479
This software is designed to backup contacts, but when I ran it FIXED my 'Synchronization Error', I don't know how or why, but my phone is now working with Activesync, maybe it will fix your problem too.
It won’t do any harm to try it, as all it does is create a backup of contacts.

cant turn on bluetooth and move files to the phone i9500

hey, i have a problem with my i9500
first i cant start bluetooth -every time i try it looks like it tries to turn itself on and doesnt succeed and sometimes when i reboot the phone it starts with the bluetooth turned on.
and when i try to move files from internal sd card to external sd card using the phone it doesnt let me do it and when i try to move using the pc (even files from the pc to the phone ) it says "The device has either stopped responding or has been disconnected." i tried looking for solutions but nothing seems to help , anyone can explain or help solving those problems ?:crying::crying::crying:

omerxt said:
hey, i have a problem with my i9500
first i cant start bluetooth -every time i try it looks like it tries to turn itself on and doesnt succeed and sometimes when i reboot the phone it starts with the bluetooth turned on.
and when i try to move files from internal sd card to external sd card using the phone it doesnt let me do it and when i try to move using the pc (even files from the pc to the phone ) it says "The device has either stopped responding or has been disconnected." i tried looking for solutions but nothing seems to help , anyone can explain or help solving those problems ?:crying::crying::crying:
Click to expand...
Click to collapse
Hi , omerxt
If you are root : for moving , deleting files or folders ...
you can tray
"root explorer" apk from aptoide give permissions for r/w
Change usb cable phone <=====> pc
What rom do you use on i 9500 ?

Now im using gearcm .. I think its problem with my pc since i tried to move thing to my ext sd using sd>usb connection and it moved the files but didnt save them (when i took it out of the pc it was deleted) so thanks anyway but if you know how to fix that ill be happy if youll help
Sent from my GT-I9500 using XDA Free mobile app

What version of gearcm are you using? Is it based on CM11 or CM12.1? IIRC, bluetooth on CM have been, if not directly broken, then unstable at best for a while.