Hi all -
Newbie here, so I'll apologize upfront for any errors. I've been searching for the last 6 hours and have learned a lot, but still can't fix my problem.
I tried to upgrade the radio only, but after that there is no radio version, no phone or internet, system on MDA is VERY slow, and I can't connect to active sync. I can get bootloader up, but when I try to install the factory rom I downloaded from this site, it says "no device connected." I've tried to copy it to an sd card and install from there, but that doesn't work either.
Every suggestion seems to need activesync, which I don't have. Is there a way to download and copy something to an SD card and install rom from there?
Please help. I'm out of town and without a phone.
Any help would be MUCH appreciated.
Thanks in advance!!
I have same problem
No phone, everything slow, activesync not working...
How can i install everything again if it doesnt recognize PC???
Pls help
Related
Hi All,
I have a Tmobile PPC Phone Edition (Wallaby) it was upgraded to WM2003 and was working fine and suddenly stop responding after Activesync and I had to hard reset it to make it work again.
I tried to install the XDA developers edition without luck since the program couldnt detect the USB connection. I then backed up in my SD card the oroginal OS ROM (Wm2003) and reinstalled it but after I did so I lost my Phone capabilities (does not give phone settings or the signal bar appears on the screen) and what is worst I can not do Activesync since it appears connected but is not.
Can anyone please help me? Maybe guiding me on how can I put a good ROM on my SD card and install from there? Porbably the XDA Devleoper Edition?
Thanks to all and merry Xmas and a Great 2005.
May be you can try to search on this website rather than setting up a new topic. I have seen and gone through your situation before.
Hi.
I have a serious probelm
When ever I try to install anything to my SD Card through Active Sync, I just end up getting the .CAB file for the install file and whenever I click on it, it installs the program to the Main Storage memory :!:
What I do is this...
I connect my XDAIIi up with my computer and use active sync to sync them both. I just then click on any of the programs that I want to install, and it asks do you want to install blah blah to the default directory (or something like that) I click NO and choose my Storage Card. It then does the above :?
PLEASE could someone help.
I am using an XDAIIi with Active Sync 4. Up until now I have had no problems. I tred downgrading to Active Sync 3.8 but that still did not work.
Am I doing something stupidly wrong???????!!!!!!!
PLEASEEEEEEEEEEEEEEEEEEEE HELP!!!!!!
PLEASE!!!!!!
I would greatly appreicate a reply as soon as posible.
Thankyou loads in advance,
Regards,
lydiachris
GURU'S NEEDED!!!
Please does anyone know?? There must be XDAIIi guru's out there somewhere!!!
Ohh..... how I wish I were one :roll:
did you try cabinst to install programs from your device to the storage card instead of using MS active sync......... ??
Ah Ha!!! Well done Just got that to work, I was trying to install Visual-IT London maps etc and I think they actually get extracted automatically to .CAB files, I have tried the bacIstall software and it works a treat Thankyou very much.
Cheers.
WHY on earth are these things ever simple?!?! :roll:
Hi
I am new here and i have problem
When i turn on my qtek9000, i recieve message Serial V.100.
If i connect USB cable it displays USB instead of Serial.
This happened when i tried to do radio upgrade (through usb hub, sim and sd were also in phone...).
I have 1gb SD card and also card reader mounted in laptop, so transfering files should not be problem.
Can someone help me with step-by-step procedure how to make my qtek work back. I used a lot of search but i am even more confused....
I just remember that when qtek worked Radio was something like 1.0.3.1 and also WWE was writen somewhere....
Probably i should put rom to sd with ntrw (which wersion of both),.......
please help....
might be a dumb question on my part - but have you tried a reset (initially a soft one but then a hard one of course, if nothing else works...) ???
I mean you will at least be able to revert back to the condition 'out of the package'...
Hope everything works out!
jup.both things NOT HELPED
looks like you're stuck in the bootloader mode....
try flashing the rom & the radio rom once again by connecting it to your laptop's usb...
i guess something screwed up while you were upgraging your radio rom...and you'd need to redo it!
Best,
San
can you please write me a procedure?
You might want to check the following thread. Everything is well described.
Cheers
hrb
http://forum.xda-developers.com/viewtopic.php?t=32725
i am trying to download files but i get permission denied all the time
You mean you get an error when clicking this link ?
ftp://xdaupload:[email protected]/Universal
I don't understand that, it works perfectly well for me
Cheers
hrb
I have solved problem with Radio upgrade. I am in much better mood now. 8)
Anyway i have 4 more questions.
1.) I am using bluetooth car-instalation Parrot CK3100. I am wondering if is possible to transfer any other sound except telephone conversations to that device. When i had Nokia 9500 i was able to hear every single click,tone,...i made on phone also on car-instalation. I also heard nokia ringtone in car instalation.With qtek i am getting generic car-instalation ringing tone instead of phone ringing. Otherwise primary intention (hands free talking) works fine. I would like to have that to be able to hear voices from various GPS software.
2.) Since QTEK9000 is PDA and phone in single unit I would like to have in car GPS application "always on top". Like previously mentioned i can easily manage my calls with car-instalation. Therefore i would like to run Phone section in background or GPS applications on top.I hope you will understand what i would like to say
3.) I also need in-car holder for qtek. Do you have any reccomendations?
4.)
My settings:
R: 1.04.02
G: 42.37.P8
D: 1.13.64.WWE
Is that ok or should i upgrade?
Stuck in bootloader mode
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Re: Stuck in bootloader mode
Bauser_uk said:
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Click to expand...
Click to collapse
try it with this file -
1. put radio.nbf and the file attached below in the same folder and run the exe with ur device connected to usb in bootloader mode...
2. hope it flashes it
S
Thanks DreamTheater
Thanks for your help - unfortunately I got the same message, ie this rom is not meant for this device etc...
Will see O2 can do anything (who's that laughing...???) - was going to buy a new xda mini anyway...!
1. REMOVE your SD/MMC card.
2. Soft/hard reset.
3. Run the upgarde again.
Step 1 above solved my problem.
i've tried to install AIM... and a webcam program.. both of which install through active sync.. however everytime I try I get the following message on my phone...
"Installation of (whatever).CAB was unsuccessful." and that's about all I get.
Also whenever I connect the phone to my PC is says it's unable to successfully syncronize and asks me to reconnect the device.
MS's support site has been less than helpful... any help you all can give would be greatly appriciated....
Installation problems.....
I am having the same problem too.
Even after a hard reset when I try and install Sprite Backup & Agenda Fusion I keep getting the install error: 'cannot be installed, try another location'
It's driving me up the wall! I would have thought after a hard reset this wouldn't be an issue. I'm now the proud owner of an MDA Pro (Universal) that I can't use because the software I want to install won't install.
Can anyone help me please?
Hi,
Couple of things you might consider / try: -
Establish an activesync connection, then use the "explore" button, navigate to your staorage card, and manually copying the .cab file from your pc to the storage card.
Then on the treo go to file explorer, storage card, and run the cab from the card.
The other thing is to check that you're using activesync 4.1 or later - updates are a free download from MS.
Hope this helps
Angus
Thank you for your suggestions.
Unfortunately i've already tried copying the CAB files straight to the device and launching them produces exactly the same result.
I'm also already using Activesync 4.2 latest version.
Is there anything else I can try?
judging from your sig, you're using a pretty old rom version... I would definitly upgrade it and then give it another go...
Hello, my friends!!
I've a problem and i'm hopping you can help me resolve it!!
Today i installed in my pc the new activesync 4.5, but i0m unable to make a connection between my S200 and the pc!! It just isn't recognized by the pc and it does'n syncronize!!!
Can anybody please help me??
Thanks in adcvance!!!
Ensure your network to the phone is not firewalled. In ZoneAlarm you have to change the phone network to "Trusted" zone.
V
Install this and try RDNIS or Serial
Hello and thanks a lot for the solutions you posted, but i have another problem!!!
When i try to install this software you gave me, my ppc simply refuses it because it says tha there is no digital signature on the program!!
Can anyone help me install this software??
Is there any way to overrunn this error message??
Thank you!!
@vijjay
I even tryed to connect it with the firewall disabeled, but i still can´t connect the ppc to activesync!!
Any other ideas??
Its weird, but usually any PPC can accept that software, tried it before with my Himalaya, Wizard and now my Prophet and all i did was install it and begin to use..
However, that error message usually happens when you have an Application Unlocked device, you can try to de-cert it first...it is really weird as i know, it only does happen with Smartphones..
Hello
This may appear crazy, but it worked for me unintentionally of course. I had given up on being able to sync via Activesync and was looking for a solution to backup my contacts before hard resetting my phone.
I had a permanent 'Synchronization Error', I just tried a piece of software posted here
http://forum.xda-developers.com/viewtopic.php?t=63479
This software is designed to backup contacts, but when I ran it FIXED my 'Synchronization Error', I don't know how or why, but my phone is now working with Activesync, maybe it will fix your problem too.
It won’t do any harm to try it, as all it does is create a backup of contacts.