hey, i have a problem with my i9500
first i cant start bluetooth -every time i try it looks like it tries to turn itself on and doesnt succeed and sometimes when i reboot the phone it starts with the bluetooth turned on.
and when i try to move files from internal sd card to external sd card using the phone it doesnt let me do it and when i try to move using the pc (even files from the pc to the phone ) it says "The device has either stopped responding or has been disconnected." i tried looking for solutions but nothing seems to help , anyone can explain or help solving those problems ?:crying::crying::crying:
omerxt said:
hey, i have a problem with my i9500
first i cant start bluetooth -every time i try it looks like it tries to turn itself on and doesnt succeed and sometimes when i reboot the phone it starts with the bluetooth turned on.
and when i try to move files from internal sd card to external sd card using the phone it doesnt let me do it and when i try to move using the pc (even files from the pc to the phone ) it says "The device has either stopped responding or has been disconnected." i tried looking for solutions but nothing seems to help , anyone can explain or help solving those problems ?:crying::crying::crying:
Click to expand...
Click to collapse
Hi , omerxt
If you are root : for moving , deleting files or folders ...
you can tray
"root explorer" apk from aptoide give permissions for r/w
Change usb cable phone <=====> pc
What rom do you use on i 9500 ?
Now im using gearcm .. I think its problem with my pc since i tried to move thing to my ext sd using sd>usb connection and it moved the files but didnt save them (when i took it out of the pc it was deleted) so thanks anyway but if you know how to fix that ill be happy if youll help
Sent from my GT-I9500 using XDA Free mobile app
What version of gearcm are you using? Is it based on CM11 or CM12.1? IIRC, bluetooth on CM have been, if not directly broken, then unstable at best for a while.
Related
Ok, i konw there's already been several threads here about downgrading from the wm2003 rom (4.01.16ENG from the rom kitchen to be precise) but i can't seem to get this thing anywhere... as i said i upgraded the rom to the one specified above and found it far slower and unstable than the ppc2002; I wanted to flash the xda with the old rom but there's this strange communicate saying that the connection has been suddenly closed and the "programme a" stops. i tried to flash the old rom directly to the device using the xdatools but also with no success... it keeps on saying that it couln't communicate with the remote application... well then i thought about this bootloader fix (still unsure what bootloadre i have because i can't get the info anywhere) and it said that the memory on the device is write protected.... :/ well, and as for now i am waiting for a sd card to try that, but.... tell me, will the xdatools prepare the card if i insert it into the device? (i have no card reader for my pc) i am woried because each action i take (except normal device usage - activesync, copying and moving files, installing appz) that messes with the roms, shuts down the connection and i have to unplug the device from my pc and plug it again... please help me, i'm in dire need!
I am having a similar problem with the same rom version. I wish i never used that version! I did an update to wm2003 earlier and i could go back and forth with no problems, but this one is a real nasty one!!
the message i get when using osimagetool:
ERROR: GetConnectionType - An existing connection was forcibly closed by the rem
ote host.
error getting connectiontype
I am having the same problem ..
and when i power on/off the device it says (Unrecognized Card)
Enter the name of the device for this card. For information, see the card manufacturer's documentation.
and there is a place where i can write something (Unknown card in socket 1)
m112a said:
I am having the same problem ..
and when i power on/off the device it says (Unrecognized Card)
Enter the name of the device for this card. For information, see the card manufacturer's documentation.
and there is a place where i can write something (Unknown card in socket 1)
Click to expand...
Click to collapse
YES!!! Same here!!
How about the phone? I cannot seem to turn it on. When the pin screen comes up it says i should turn on the phone, but i cant dothat anywhere..
Hi All,
The best option for ROM upgrade is always the SD method ... it's much easier and safer. XDAtools doesn't work with some ROMs because of the boot loader version not the ROM itself.
So what do you say guys? will i be able to downgrade it from the sd card? - and first of all, prepare the card having it inserted into the xda itself and using xdatools? i also wish i had never used it, the newest ppc2002 rom from o2 is just soo cool comparing to the wm2003 one i'm stuck with right now...
Hi All,
Newbie here so please be nice :wink:
I have only had my XDA Mini for a few weeks now and have just tried to copy files from the PC straight to the storage card via Activesync. I open Activesync and click on 'File' then 'Explore'. The explorer window opens but I get this message...
"Critical communications services have failed to start. Try resetting the mobile device, and then connect again."
I have reset the mini and rebooted my PC many times but it has made no difference. What does it mean and how do I fix this problem?
I believe this is an issue with the built in XP firewall... Install another firewall, disable the built-in one and try again.
Hi,
I have the problem as well from time to time. As an alternative I found out, that you can place files in \My document\<Device name>_Syncronised Files (or similar, sorry I use the german version). If you acitivate ActiveSync feature of syncing files, these files will be transfered to the device. You cannot access the memory card this way but at least you can transfer files even if the 'Explore' funtion is not working.
regards
marco
Thanks Guys.
Marco, I have been downloading via My Documents without any problems. The problem here is that I am limited to the memory on my device. I need to download straight to the Storage Card as the files are larger then the internal memory.
Sunoke, ill try the Firewall thing and see how I go.
Hi
I am new here and i have problem
When i turn on my qtek9000, i recieve message Serial V.100.
If i connect USB cable it displays USB instead of Serial.
This happened when i tried to do radio upgrade (through usb hub, sim and sd were also in phone...).
I have 1gb SD card and also card reader mounted in laptop, so transfering files should not be problem.
Can someone help me with step-by-step procedure how to make my qtek work back. I used a lot of search but i am even more confused....
I just remember that when qtek worked Radio was something like 1.0.3.1 and also WWE was writen somewhere....
Probably i should put rom to sd with ntrw (which wersion of both),.......
please help....
might be a dumb question on my part - but have you tried a reset (initially a soft one but then a hard one of course, if nothing else works...) ???
I mean you will at least be able to revert back to the condition 'out of the package'...
Hope everything works out!
jup.both things NOT HELPED
looks like you're stuck in the bootloader mode....
try flashing the rom & the radio rom once again by connecting it to your laptop's usb...
i guess something screwed up while you were upgraging your radio rom...and you'd need to redo it!
Best,
San
can you please write me a procedure?
You might want to check the following thread. Everything is well described.
Cheers
hrb
http://forum.xda-developers.com/viewtopic.php?t=32725
i am trying to download files but i get permission denied all the time
You mean you get an error when clicking this link ?
ftp://xdaupload:[email protected]/Universal
I don't understand that, it works perfectly well for me
Cheers
hrb
I have solved problem with Radio upgrade. I am in much better mood now. 8)
Anyway i have 4 more questions.
1.) I am using bluetooth car-instalation Parrot CK3100. I am wondering if is possible to transfer any other sound except telephone conversations to that device. When i had Nokia 9500 i was able to hear every single click,tone,...i made on phone also on car-instalation. I also heard nokia ringtone in car instalation.With qtek i am getting generic car-instalation ringing tone instead of phone ringing. Otherwise primary intention (hands free talking) works fine. I would like to have that to be able to hear voices from various GPS software.
2.) Since QTEK9000 is PDA and phone in single unit I would like to have in car GPS application "always on top". Like previously mentioned i can easily manage my calls with car-instalation. Therefore i would like to run Phone section in background or GPS applications on top.I hope you will understand what i would like to say
3.) I also need in-car holder for qtek. Do you have any reccomendations?
4.)
My settings:
R: 1.04.02
G: 42.37.P8
D: 1.13.64.WWE
Is that ok or should i upgrade?
Stuck in bootloader mode
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Re: Stuck in bootloader mode
Bauser_uk said:
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Click to expand...
Click to collapse
try it with this file -
1. put radio.nbf and the file attached below in the same folder and run the exe with ur device connected to usb in bootloader mode...
2. hope it flashes it
S
Thanks DreamTheater
Thanks for your help - unfortunately I got the same message, ie this rom is not meant for this device etc...
Will see O2 can do anything (who's that laughing...???) - was going to buy a new xda mini anyway...!
1. REMOVE your SD/MMC card.
2. Soft/hard reset.
3. Run the upgarde again.
Step 1 above solved my problem.
read more: http://www.softick.com/news.html#83
Re: Softick Card Export II version 2.11! Now working on Wiza
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Re: Softick Card Export II version 2.11! Now working on Wiza
bolasz said:
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Click to expand...
Click to collapse
It works for my 838.. I have lockup and unable to switch to SDcard mode only if I connected to my PC and activesync once and unplug. But that seems to be the activesync issue in my 838 which fail to free itself from unplug from PC. So it cannot switch to SDcard mode..and prompt me an error message.
I have already switch to AS4.1 but does not improve my situation.
What is Microsoft doing here?? :roll: A soft reset is the only way to get my device syncup again.. :x
I own this program since I had my XDA mini ...
finally I can use it again to copy some files to my pda and use it as a memory stick...
I also noticed some problems:
1. after I connect the USD cable and the PC recognized my pda as a memory stick, Windows XP asked me to make a reboot in order to be able to use the new 'harddrive'
2. after I copied a .jpg to my pda it looked like the storage card is no longer recognized by WM5. The icons of the shortcuts to programs I installed are missing and I cannot browse with TotalCommander to my storage card.
After disconnecting the USD cable, my storage card could be found again - is this a bug or a feature?!
After the first connect in mode 'Card Export' I switched to 'Active Sync' and the synching went on without any problems.
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
This looks also to me like an incompatibility between card export and active sync.
Hmpf ... rebootet the phone and connected - voila - my Wizard was again properly verified as Memory Stick and I again could upload another .jpg to my device.
It looks definately unfinished ... but it is working quite acceptable to me, though there is a lot room for improvement, it will get the job done, if I need a memory stick 'on the go'.
My device is a HTC Wizard, O2 german.
i may be wrong on the second point, but activesync alters a file when you transfer it to the pda,
so if you transfer a file to the card (even using a card reader) then put the card back in the pda wm5 will not recognise it properly.
point 1 should only happen the first time of detection.
have no problem with my XDA II...
Chris09 said:
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
Click to expand...
Click to collapse
I am experiencing the same... Please update this topic if you'll find a solution.
i'm having the missing dlls dialog problem too.
I noticed that once you activesync'ed, you can't switch to card mode and need to reboot the device.
However, mine can't seem to work anymore. It won't even switch. But I also tried disabling my today's screen (pocket plus and pocket breeze) and it works... but only the icon manage to change. My PC can't detect it as a mass storage device though.
Any luck?
Mine is working fine, I got that dll message once but a soft reset fixed it.
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
eilz said:
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
Click to expand...
Click to collapse
Same here too!! using ver 2.12
ver 2.11 worked fine with me, so most probably I will downgrade to it now.
I emailed the tech support and waiting for their reply. I will post it here in case I get anything new.
I just tried v2.12, and it didn't work. I found v2.11 on some download site, and installed it. v2.11 worked fine on Qtek's 2.8.7.1 ROM.
I cant get this to work either using 2.12. I get the device manager problem as mentioned previously. Does anyone know where can i get 2.11 from?
found it here:
http://www.softick.com/files/CardExportPPC211c-softick-en.zip
but i get the same problem
You can find previous versions in the "download" section on the left.
I'm having the same issues, used to work fine with 2.11, then it stopped being able to write but could still read (this is on my Mac), and now with 2.12 I can't even get the thing to mount. I'm talking with the developer to see if we can get a fix.
Any 2.12 and 2.11 not working for me... My computer and three others shows me message that they don't have drivers
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
pewe said:
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
Click to expand...
Click to collapse
I'm a bit confused regarding their reply.
You asked a question about the Wizard and they replied saying they are waiting on delivery of HTC Universal to examine it better. I'm not sure what the Universal has to do with compatibilty for the Wizard as they are completely different devices with different hardware. (Mybe i'm wrong and the hardware components that Card Export uses is actually the same on both devices)
Puckster -
I noticed this on second look, and asked for clarification.
just want to inform everyone that there is a free alternative. it's similar to softick card export that it turns your device into a plug-and-play card reader. it's called wm5torage (yes, the number '5' is the letter 'S')
http://forum.xda-developers.com/viewtopic.php?t=45411&highlight=wm5torage
it does not have the system tray icon that enables you to switch between activesync and export mode, but rather you open the app in your accessories folder and activate/deactivate it from there.
but hey, it's free and it works
Hi all -
Newbie here, so I'll apologize upfront for any errors. I've been searching for the last 6 hours and have learned a lot, but still can't fix my problem.
I tried to upgrade the radio only, but after that there is no radio version, no phone or internet, system on MDA is VERY slow, and I can't connect to active sync. I can get bootloader up, but when I try to install the factory rom I downloaded from this site, it says "no device connected." I've tried to copy it to an sd card and install from there, but that doesn't work either.
Every suggestion seems to need activesync, which I don't have. Is there a way to download and copy something to an SD card and install rom from there?
Please help. I'm out of town and without a phone.
Any help would be MUCH appreciated.
Thanks in advance!!
I have same problem
No phone, everything slow, activesync not working...
How can i install everything again if it doesnt recognize PC???
Pls help