Phone lock exceptions - Touch HD General

Hi, the problem happens when I use a program where i watch the screen but don't touch it for some time. Programs like Ereader and Tomtom.
Then the phone goes to the lockscreen and i have to unlock it again. Not very easy when you are driving a car
But i can't find a solution. Does anyone know the answer?

Related

Turning on screen with stylus out?

Hi just wondering how it would be possible to bring the phone out of standby mode when i pull out the stylus from the phone?
The weird thing is that sometimes when i take out the stylus the screen turns on but most of the times i have to just press the button at the top to turn it on.
Would actually rather not do that but to turn on when i want to use it with the stylus.
I used Gyrator but that didn't work.
Any suggestions of apps?
anyone????
You can do that with S2U2.
Well any other programs? I hate SU2U.
Then pocketshield is the programm
I like it more then s2u2
Don't really know what advice to give you here... My HD turns on every time if I pull the stylus out, while it's in standby-mode.
The reason for why it only works some times for you can be a conflict with a program you have installed.
Gyrator works absolutely fine for this function. Can even turn th PDA off too when it is put back (although I don't use this particular function)
I use Gyrator too and it seems to work, it might even be a native HD function.. not sure as I didn't try it before.
I don't have your problem. I didn't add specific software for that however my HD wakes up every time I put stylus out.
i have duttys rom 1.7 and it does this automatically
Maybe its as easy as a registry change?
I second that nikki, my HD does it with no 3rd party programs or ROMs
As far as i remember, it is by default, but you can turn this off with advanced config or HDTweak.. can't remeber which one.
Ciao
Fred
It works like this as default indeed. Check your tweak or other programs that might interfere.
Can't find a single setting in Advanced Config or HD Tweak for anything to do with pulling out the stylus. Also tried AEBplus thinking that this would let me map the pull out action as a key, but this didn't work either.
Does anyone know the registry entry for when you pull out and put back in the stylus? I'd like to be able to set that up so it can run the notes program.
Problem with Stylus!!
has someone an answer for this?
I'd like to switch the automatic wake up off, because my stylus has some failures now, I don't know how to fix it.
Everytime I touch the side of the phone, where the stylus is placed the device is unlocked. seems to be a kind of defective contact. not sure how to explain it correctly. but it's annoying, when I pull my phone out of the pocket it unlocks, or maybe when it put it in, that's not so funny...
how can I switch the stylus-unlock-function off? any kind of registry setting?

all s2u2 works with HTC touch 3g?

the weather function wont' show up? any solution?
another thing
since s2u2 already serve as a screen lock,
does anyone know how to turn off the auto lock? (which resulted in need of press the power bottom once~) waste 2 secs!
doggieb said:
the weather function wont' show up? any solution?
Click to expand...
Click to collapse
The same here..
It seems something happened to ACCUWEATHER server or something happened to server linking in our Jade.
Seeking solution here too.
my bad, New version S2us 1.62, works fine~!!!!!!

Windows Classic Lock screen problem

Hello all,
I like having my phone locked on the Windows Classic lock screen, as it means I can see the Manila homescreen when the screen is locked (unlike the slide to unlock of the Windows Default screen).
However, when I receive and incoming call on the Windows Classic lock screen, I am first asked to unlock the device, before I can answer the call with the Manila answer slider.
This isn't the case with the default lock screen.
Does anyone know if there is a workaround for this? Or some fix?
Or do I just need to get used to the Windows Default slide to unlock screen?
Thanks ^^
Anyone got any ideas if there anything we can do about this?
80 page views and no one has any ideas.
Hey again guys,
Sorry to bump this, but I was wondering if anyone knew/knows of a way around this. Basically, what happens, is this:
When the phone uses the Windows Classic lock screen (ie what it used to have on WinMo 6.1, not slide to unlock) when someone phones me, the phone brings up the unlock button to press, before I can use the slider to answer the call.
As far as I remember, it only did this on my X1 when I switched to itjes Leo 10 version, which had the Manila version our phones had.
It's a bit annoying, as I like to have my phone locked on the Manila home screen, but having to unlock the phone before answering a call is very annoying.
Maybe someone has an idea of a fix, or a work around to stop it bringing up the unlock button?
Hum and what if you just press the real physical answer button ?
piflechien said:
Hum and what if you just press the real physical answer button ?
Click to expand...
Click to collapse
I could do that yes. But the screen stays locked with the unlock button on the screen. So it still doesn't really fix anything other than being able to answer the phone.
I was wondering why it does this (always used to bring up the slider on Manila 2.1 on my X1) just wondering why it doesn't with WinMo 6.5 and HTC Sense on.
Anyone managed to get this to work yet?
Can't get the screen to auto-unlock when someone phones =(
Still having to use the slide-to-unlock slider. Oh well.

iGO8 and screen lock

Hello. I have a HTC HD2 and I am very happy !!
I have a problem, when I'm using iGO8 the screen lock appears and I have to unlock the phone to see again iGO8. Any way to stop this?
Thanks!!
The best forum is here!!!!
There's a setting in igo that enables the backlight to always stay on. Further more you could install s2u2 and add igo as an exeption. Thats what i did. I find it more usefull this way cuz i can have control over what locks the screen.
Thanks! I already found this option and it works perfectly.
Thank you again.

S2U2 problems on Omnia 2, Not everything works properly

Hi there! I have a problem with S2U2 on my I8000 Omnia 2. I installed it, and tried it. It's a cool program, but the call screen is not working to me.
----------
I also have new problems with S2U2. smile.gif I don't care about the sliders anymore, I was turned all off. But when my phone rings, and I press the answer button, the phones keep ringing and not do anything. I can't accept calls with S2U2. Is this a known issue or someone have an idea how to fix this? Or I should use an other app like S2U2?
----------------------
This messages copying modoco.
Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)
S2U2 was a real pain in the ^ss up until v2.30.
I haven't had any locking issues with the new version, but some serious battery drain have been spotted. I don't mind, since I have chargers at the car, the office and any other place I need it.
It takes like 13% percent of battery overnight when the phone sleeps.
Without S2U2 I can navigate with GPS for an hour for around 10%.
i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance
Fire1986 said:
Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)
Click to expand...
Click to collapse
I am using WM6.1 and problem with s2u2 (LATEST) is that while it locks the screen nicely, it leaves the ans/end hard key exposed. This creates problem when I accidentally press them while taking phone out of the pouch. For that I had to have other arrengements as mentioned in this forum. If you had no such issues, then your OS must be of a different version. I hate machine specific softwares.
Not true
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.
I am facing a different problem with S2U2..
When I am listening to music through Touch Player, the song gets paused as soon as S2U2 activates, then I have to press the lock key and then the song plays again
When S2U2 is not running it plays the song flawless..
Any settings I need to change..?
Khisha said:
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.
Click to expand...
Click to collapse
But at the end of the day, it is not locking the ans/end lock keys which is a problem
Ps: I hv never owned an HTC
No need to use S2U2 now, I am using TouchLockPro, much much better, no more secondary gesture when power on, also the app is fully utilizing the G-sensor and the light sensor.
mokkimhong said:
i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance
Click to expand...
Click to collapse
I had the same problem that was very annoying and some of the above too...The main reason I wanted s2u2 was because I didn't want the hardware key button answer call to be enable.Sometimes I was answering calls without knowing it because it was in my bag and with all the stuff in it the button was pushed by itself...From what i see samsung herself has slides for accept or end calls, why the hardware key buttons have to work too?Do you know any trick to disable them when the phone is locked...
Thanks i n advance!
I have the same problem with my Omnia.
Using latest S2U2 (2.43) and setting an alarm with the standard Samsung app.
I have tried most probably all combinations of s2u2 and alarm settings, without any luck.
Anyone ever found a solution for this ?

Categories

Resources