Hi there! I have a problem with S2U2 on my I8000 Omnia 2. I installed it, and tried it. It's a cool program, but the call screen is not working to me.
----------
I also have new problems with S2U2. smile.gif I don't care about the sliders anymore, I was turned all off. But when my phone rings, and I press the answer button, the phones keep ringing and not do anything. I can't accept calls with S2U2. Is this a known issue or someone have an idea how to fix this? Or I should use an other app like S2U2?
----------------------
This messages copying modoco.
Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)
S2U2 was a real pain in the ^ss up until v2.30.
I haven't had any locking issues with the new version, but some serious battery drain have been spotted. I don't mind, since I have chargers at the car, the office and any other place I need it.
It takes like 13% percent of battery overnight when the phone sleeps.
Without S2U2 I can navigate with GPS for an hour for around 10%.
i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance
Fire1986 said:
Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)
Click to expand...
Click to collapse
I am using WM6.1 and problem with s2u2 (LATEST) is that while it locks the screen nicely, it leaves the ans/end hard key exposed. This creates problem when I accidentally press them while taking phone out of the pouch. For that I had to have other arrengements as mentioned in this forum. If you had no such issues, then your OS must be of a different version. I hate machine specific softwares.
Not true
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.
I am facing a different problem with S2U2..
When I am listening to music through Touch Player, the song gets paused as soon as S2U2 activates, then I have to press the lock key and then the song plays again
When S2U2 is not running it plays the song flawless..
Any settings I need to change..?
Khisha said:
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.
Click to expand...
Click to collapse
But at the end of the day, it is not locking the ans/end lock keys which is a problem
Ps: I hv never owned an HTC
No need to use S2U2 now, I am using TouchLockPro, much much better, no more secondary gesture when power on, also the app is fully utilizing the G-sensor and the light sensor.
mokkimhong said:
i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance
Click to expand...
Click to collapse
I had the same problem that was very annoying and some of the above too...The main reason I wanted s2u2 was because I didn't want the hardware key button answer call to be enable.Sometimes I was answering calls without knowing it because it was in my bag and with all the stuff in it the button was pushed by itself...From what i see samsung herself has slides for accept or end calls, why the hardware key buttons have to work too?Do you know any trick to disable them when the phone is locked...
Thanks i n advance!
I have the same problem with my Omnia.
Using latest S2U2 (2.43) and setting an alarm with the standard Samsung app.
I have tried most probably all combinations of s2u2 and alarm settings, without any luck.
Anyone ever found a solution for this ?
Related
1 thing that bugs me about the X1 is that when I make a call or receive a call I press the display with my ear and I'm entering menues and possibly even changing settings without knowing it.
Is there a way to automatically lock the screen when making a call or receiving a call? (like it's done with the power button)
Any help is appreciated
It should be possible to steal the registry settings from a TyTn 2 device or Touch Pro for that setting. Anyone here know the specific registry settings?
As an alternative search the Kaiser forums, someone over there will have the details.
My x1 does this anyway
After being on a call for around seven seconds, the screen locks and only activates again by pressing power, hang up or answer call (Green/pickup)
No idea if this is intended...but its certainly a good idea.
jeeves5454 said:
It should be possible to steal the registry settings from a TyTn 2 device or Touch Pro for that setting. Anyone here know the specific registry settings?
As an alternative search the Kaiser forums, someone over there will have the details.
Click to expand...
Click to collapse
I found this over at the Kaiser forum: S2U2
This app has the screenlock/screenpoweroff feature among others. Check it out. It's free too!
Thank you for the replies!
emwdava said:
I found this over at the Kaiser forum: S2U2
This app has the screenlock/screenpoweroff feature among others. Check it out. It's free too!
Thank you for the replies!
Click to expand...
Click to collapse
would this work on the x1 i know it only supports qvga and vga devices i'm not sure if AC's released a version compatible with wvga phones yet if so this app is a must have
Keland44 said:
would this work on the x1 i know it only supports qvga and vga devices i'm not sure if AC's released a version compatible with wvga phones yet if so this app is a must have
Click to expand...
Click to collapse
I works on the X1, but sometimes the app fails to bring itself to the front. So it appears nothing happened when in fact the display is locked. This happens alot in landscape. To set things right again just go to portrait mode and tap the iLock icon twice (if it's already running it will shutdown itself, tap again and it starts).
EDIT!!
I found a fix for the landscape bug. Change display from direct draw to Raw Buffer.
Naffets said:
My x1 does this anyway
After being on a call for around seven seconds, the screen locks and only activates again by pressing power, hang up or answer call (Green/pickup)
No idea if this is intended...but its certainly a good idea.
Click to expand...
Click to collapse
Mine does the same, it turns off and I must press the power button to activate again..
I think that S2U2 was fun for a while but nothing more than that. What i wan't is something that uses the standard lock activated by the "No"-key and turns it on automatic. Dosen't some other WM phone have these issues?
emwdava said:
EDIT!!
I found a fix for the landscape bug. Change display from direct draw to Raw Buffer.
Click to expand...
Click to collapse
Thanks, got the same Problem and this solved it!
on my trinity it was all well and good until you need to type in an account number or credit card details while using the phone to call a bank or make a payment!
csdevctrl
Use "csdevctrl"
--->>>http://forum.xda-developers.com/showthread.php?t=386451
It can lock your device in whatever way you want...
Greets !
Hi fotoingo,
This is just what I needed - thanks.
As a non dev and just returning to WinMo after a long absence, please can you advise how I would get the hard keys on the X1 to work during a call and just disable the touchscreen?
Thanks
sthoeft said:
Thanks, got the same Problem and this solved it!
Click to expand...
Click to collapse
for all s2u2 fanatics out there. run the version 1.22 its the most stable for X1 and disable backligt check and direct draw off, never hangs or anything at all.
there are better solutions for win mo phones then s2u2, otherwise buy an iphone...
i have tried all versions of s2u2 but its too buggy - particularly with incoming phonce calls; i am back to the stock Lock.
Anyone have any recommendations?
Thanks!
Throttlelock is my favorite just because it also adds a security element to your phone...not just slide to open which is fine for those who don't care but I used it for almost 3 months not buggy at all...
S2U2 runs perfect for my, I just disable the caller ID.
I have been using throttlelock for afew days now and really enjoy it. It is more secure than s2u2 or the factory lock. Prior to this I used the factory lock. I stopped using s2u2 for a few reasons:
1- When you set it to lock when device wakes up, often times I would turn on the phone, 3 seconds later it would lock, then I would have to unlock it to use it. With throttlelock however, as soon as the screen turns on, the lock is displayed.
2- a little too iphone-esq for me
However, I still have s2u2 installed because I really like the 'blank screen on talk' feature.
S2U2 1.35 is up, and caller ID working PERFECT for me, so far at least, will get more use tommorrow.
mlin said:
However, I still have s2u2 installed because I really like the 'blank screen on talk' feature.
Click to expand...
Click to collapse
What does the "blank screen on talk" feature do? I have S2U2 and I never have understood what the feature did so I've always kept it disabled.
Reignz said:
What does the "blank screen on talk" feature do? I have S2U2 and I never have understood what the feature did so I've always kept it disabled.
Click to expand...
Click to collapse
It will blank the screen during a phone call to prevent screen taps.
TheChampJT said:
It will blank the screen during a phone call to prevent screen taps.
Click to expand...
Click to collapse
Plus it will help with power saving...
on another note...Version 1.35 of s2u2 seems rock solid for me.
any more reviews on 1.35 ? or ThrottleLock?
kei78 said:
Plus it will help with power saving...
on another note...Version 1.35 of s2u2 seems rock solid for me.
Click to expand...
Click to collapse
kei,
what is your setup? the Vogue's stock caller-id has problems with s2u2 - with the s2u2 caller id off, of course.
what do you have set up?
agentmikeyd said:
kei,
what is your setup? the Vogue's stock caller-id has problems with s2u2 - with the s2u2 caller id off, of course.
what do you have set up?
Click to expand...
Click to collapse
Iam using OMJ's manilla 2d rom and s2u2 version 1.35. Version 1.30 really screwed up my phone so i had to hard reset. Version 1.32 was released a few short days later and fixed what ever was causing issues that 1.30 had... In the settings for s2u2, i tried the other graphic settings but left it at direct draw as everything seems to be fast.
1.35 i noticed works flaslessly and everytime my screen goes blank it shows the lock screen. Caller ID, blank screen on talk and all other features are bang on for me...
has anyone experience any problem when using S2U2 on X1? I can press panel key or Ok key then it will take me to the panel/today screen without slide to unlock.
S2U2 screen sometimes display abnormal
Please?
randy_c said:
has anyone experience any problem when using S2U2 on X1? I can press panel key or Ok key then it will take me to the panel/today screen without slide to unlock.
Click to expand...
Click to collapse
Same here. The Panelbutton as well as the Camera button still work in S2U2 lock mode. It doesn't concern me much, because it's essential that noone gets a phone call or music starts to play while the phone is in my pocket. If the panel-button is accidentally pressed nothing bad happens.
S2U2 screen sometimes display abnormal
Please?
Click to expand...
Click to collapse
This sometimes occured when I set the "Display Mode" to DirectDraw. Now I use RawBuffer and haven't had this problem for 3 weeks now.
Let me ask you a question:
When in landscape-mode and the phone is locked with S2U2 the button to slide reacts very slow. In portrait-mode the button follows the finger very quickly. Is it the same with your phone?
Let me ask you a question:
When in landscape-mode and the phone is locked with S2U2 the button to slide reacts very slow. In portrait-mode the button follows the finger very quickly. Is it the same with your phone?[/QUOTE]
I have the same problem. Maybe it's the X1
Thanks, so then I'm calmed First I thought it could be an issue of the picture I use but after a few different ones it was still the same. So it's not just my phone
that's interesting, with the exception of the landscape problem I wasn't aware of the x-panel and camera button issues. This is more likely going to be a fix / update needed for S2U2...
I have got the same problem.
S2U2 doesn't work correctly in landscape mode on my Xperia. The sliding thing and the whole program become very slow.
This problem doesn't seem to be solved yet.
I am wondering if its a Xperia only problem, otherwise in should have been fixed till now.
F-Styla said:
I have got the same problem.
S2U2 doesn't work correctly in landscape mode on my Xperia. The sliding thing and the whole program become very slow.
This problem doesn't seem to be solved yet.
I am wondering if its a Xperia only problem, otherwise in should have been fixed till now.
Click to expand...
Click to collapse
The Xperia always seems to be very slow in landscape mode no matter if I'm using the SE panel, the messaging application or touchflo3D. Very strange behaviour considering the display resolution stays the same.
It is partly a xperia specific problem. The panel button is controlled at a very low level in the phone. The panel button action is located in the registry, but that action is called from a low level. The button isn`t recorded by most programs.
A_C knows of this issue.
btw, you can disable landscape for s2u2. So it`s in portrait allways.
dekeijzer said:
btw, you can disable landscape for s2u2. So it`s in portrait allways.
Click to expand...
Click to collapse
Yeah, that's right. But then sometimes the screen messes up completely when I slide out the keyboard and the phone wants to change the screen mode. Also, I have problems with the dialer and S2U2. Sometimes the dialer screen stays on top but S2U2 locks the screen. There is no way to unlock the screen anymore because S2U2 is not on top but the dialer screen cannot be closed.
If this problem is Xperia specific, I will disable S2U2 in landscape mode. I always hoped they will bring a update which solves this problem.
The Xperia always seems to be very slow in landscape mode no matter if I'm using the SE panel, the messaging application or touchflo3D. Very strange behaviour considering the display resolution stays the same.
Click to expand...
Click to collapse
Yes i realized the same. I thought this would be a problem of Windows Mobile and not of the Xperia. If it is a Xperia problem, this is a big minus point for the phone.
It's a nice unlock system, but I have found that when I use this programme the battery loses power quickly.
was using ver 1.44 very stable for a long time
until i installed panel manager from r3a... same issues with panel button unlocking and ok button unlocking
upgraded to 1.62 and problems got worse...
downgraded to 1.52 and switched back to panel manager r2a for the time being.. which is ok.. b/c i rarely used the growing panel and the new cnn panel sucked anyway..
would love to have all the features of s2u2 1.62 but alas xperia doesn't quite seem to work that well with it
currently i have s2u2 set to ignore screen rotation and not unlock with keyboard slide out
my only real grief at this point is that it won't let me use slied to answer or just the regular answer keys with caller id turned on ... i have to turn it off and use the SE answer key completely unlocks my phone to display that message too so agravating...
A_c makes a kick ass program none-the-less ... !!!
same problem here. Also with last version no lock for panel button and camera button...
Camera and Panel button are known issues ...but not a problem for me either -as I do not see S2U2 as a "security focused lock" ...instead I see it as a "prevent accidental calls etc" type of lock
I still use the system lock with password if I need to "security lock it" (using a today shortcut that immediately invokes it, with password)
Must say I suffered some probs with v1.4 and v1.5 (caller ID & power drain)
But am using 1.62 without problems -it doesn't freeze on caller ID (I have it on window rather than full screen) and the battery drain has gone completely (uses <10% overnight for example, with G-alarm and data / active sync both running all night)
I found that it really was critical to uninstall, delete the S2U2 folder in program files, and delete the whole S2U2 tree in the registry ...and then soft reset -before installing the new version
I'm a huge fan of S2U2 ...its just awesome -without a doubt THE must-have app IMHO and always the first thing I install after a hard reset
I use S2U2 and have just upgraded to 1.62. Seems to be working ok so far, although no-one's called me since I upgraded so not sure of freeze problem :-(
(note to self: Get out more, make some friends ;-)
I find landscape doesn't work well at all with S2U2, but then I also find that with PointUI Home2, so maybe it's an X1 thing with particular software...?
The battery drain issue does seem to be resolved in 1.62.
I too am having problems with screen freezing when a call is received - the slider doesn't answer and since I had the buttons disabled there was no way to answer the call.
I'm still experimenting with other settings but I don't get many calls so it is a long process.
Still, a superb program and essential for me because of the problems with a magnetic case which causes calls to be answered just by removing the phone from the case.
jcsxda said:
Camera and Panel button are known issues ...but not a problem for me either -as I do not see S2U2 as a "security focused lock" ...instead I see it as a "prevent accidental calls etc" type of lock
Click to expand...
Click to collapse
Which means it can't even do accidental call prevention properly, as I found today. It's still quite easy to press the Panel button then the Call button in succession, as they are next to each other, especially if the phone's in a case. Result - pocket dialling, defeating the whole object of program. Shame really, as I've found S2U2 ideal on other phones.
Yep landscape is very slow ..... when i put ignore screen rotation on sometimes when open the keyboard screen goes all fuzzy... bitof a problem. But its a great program...sure it just needs some tweaks n bugfixxes for the X1
sweeet on v2.02 im no longer getting these landscape issues
As seen on Sony Ericsson W380 Gesture control
"Another novel feature of the W380 is its gesture control. Switch this feature on and you will be able to silence incoming calls or snooze alarm clocks by simply passing the palm of your hand above the sensor"
Well maybe this is a long shot but anyone has any idea if a program like that exists on WinMo?
Well as far as I see Sony made this Feature with help of a proximity-sensor and the only Phone/PDA I know which has one is the TouchPro 2
But there are a lot of Apps which let you silence Calls (built-in in most htc devices) and let you snooze alarm clocks by shaking or turning the Phones, also they let you unlock your Device and soooo much more funny things =)
give it a shot
Vicyl said:
Well as far as I see Sony made this Feature with help of a proximity-sensor and the only Phone/PDA I know which has one is the TouchPro 2
But there are a lot of Apps which let you silence Calls (built-in in most htc devices) and let you snooze alarm clocks by shaking or turning the Phones, also they let you unlock your Device and soooo much more funny things =)
give it a shot
Click to expand...
Click to collapse
yeah, but without touching the device? i guess if there is an app that enables camera when phone rings this thing can be done
Well you're free to try but i don't think you're chances of success are high
good luck
nicandris said:
i guess if there is an app that enables camera when phone rings this thing can be done
Click to expand...
Click to collapse
you can execute camera app with mortscript on the incoming call i think.
i think the i900 has proximity sensor......
sorry it doesnt.......
i8000 Omnia2 has it!
yup thats right..........
does it have it as a device you mean or does it work as an application?
...
think best/easiest way on HD wouldbe light sensor on top.
So on incoming call it should check if there is a short light-interruption.
Prob:
just works if phone shows face up on your desk
And won't work if room is dark (perhaps could work other way round - if it's too dark - check for short light notice, reflected by your hand from display)
otherwise is would be to hard and battery intensive cause you have to check both cameras (back and front) for changes.
I know silencing without touching it sound interesting but its a bit too playful for me.
Cause pressing vol down button is fastes way to silence.
Another way already included in some progs is turning phone face down to silence - think it's as stylish as waving to your phone.
greets
FrEcP
FTouchSL has some screen based user definable gesture controls and is an extremely useful app, but no proximity controls.
FrEcP said:
...
Cause pressing vol down button is fastes way to silence.
Another way already included in some progs is turning phone face down to silence - think it's as stylish as waving to your phone.
greets
FrEcP
Click to expand...
Click to collapse
so g-sensor can be used also. i think it's used by g-alarm on snooze, anyone seen it for silence also?
hello.
i've encountred something weird with s2u2 and wm6.5 on my hd2.
i get a call, and the full screen from s2u2 works for a second, but then the regular small and enoying caller canvas of the wm6.5 comes ontop of the
s2u2. when the ends the same thing happens but reversed. the wm shuts down and i can see the s2u2 screen for a second and then it disappears.
i've uninstalled BSBtweaks and CHTeditor cause i thouhgt maybe that's the problem. but no. still the same. even reinstalled s2u2. same thing.
maybe i should do a hard reset? can anyone point me to how to do it. it still doesn't promises resolts but i'm willing to try anything. i realy like the way
s2u2 "supose" to show the caller. i say "suppose" cause i haven't realy seen it or worked with it...
thanks for any reply...
I would recommend you turn off Caller-ID in S2U2, I have been doing this as the Sense Caller ID screen works in much the same way and offers like capabilities. Once you have turned off S2U2 Caller-ID, all should work perfectly!
yeah but
i really like a big full screen caller id. and with the s2u2 lock screen it seemed perfect...
So I would say you either go pretty or working, your choice... mine was for working
I have an issue also, when pressing the back button, it trigger volumn rocker button...any solution to this???