Related
Whenever I turn my phone on it shows an empty notification "bubble". Also in the top bar next to the G/3G icon is an extra icon, the one that shows up when you change keyboard input to numbers. It just stays there... Also the lower-left "softkey" turns to Notification instead of the usual Agenda.
I can only get rid of it by opening up a new sms/mms/email, because then the icon for t9/abc/numbers needs to be used, so it sort of refreshes the icon and it goes away when I exit the sms/mms/email.
Now I was just wondering if there's any way to fix this? It's bugging me, although not to a degree at which it would be frustrating, but still... I'd rather not have to go through the above mentioned steps everytime I turn my phone on.
I think it's too minor of a problem for flashing my phone. So, any suggestions on what to do? Thanks!
hi - tap start/ settings in personal tab tap "lock" untick box listed "prompt if device unused for" this sovled for me
Thanks! That worked. I'll leave it like this for the moment, but if there's a way without turning off the lock please let me know.
KrewCial said:
Thanks! That worked. I'll leave it like this for the moment, but if there's a way without turning off the lock please let me know.
Click to expand...
Click to collapse
it's a known bug.
i haven't seen it since i flashed the niki project ROM.
Aww, ok.
Guess there isn't much else to do then. I'll wait for an HTC update.
(Anyone know when WM 6.1 will be here for the touch dual? )
KrewCial said:
Aww, ok.
Guess there isn't much else to do then. I'll wait for an HTC update.
(Anyone know when WM 6.1 will be here for the touch dual? )
Click to expand...
Click to collapse
Then Niki Project ROM runs WM6.1. Try it. I have it on my Niki and it's fantastic!
1 thing that bugs me about the X1 is that when I make a call or receive a call I press the display with my ear and I'm entering menues and possibly even changing settings without knowing it.
Is there a way to automatically lock the screen when making a call or receiving a call? (like it's done with the power button)
Any help is appreciated
It should be possible to steal the registry settings from a TyTn 2 device or Touch Pro for that setting. Anyone here know the specific registry settings?
As an alternative search the Kaiser forums, someone over there will have the details.
My x1 does this anyway
After being on a call for around seven seconds, the screen locks and only activates again by pressing power, hang up or answer call (Green/pickup)
No idea if this is intended...but its certainly a good idea.
jeeves5454 said:
It should be possible to steal the registry settings from a TyTn 2 device or Touch Pro for that setting. Anyone here know the specific registry settings?
As an alternative search the Kaiser forums, someone over there will have the details.
Click to expand...
Click to collapse
I found this over at the Kaiser forum: S2U2
This app has the screenlock/screenpoweroff feature among others. Check it out. It's free too!
Thank you for the replies!
emwdava said:
I found this over at the Kaiser forum: S2U2
This app has the screenlock/screenpoweroff feature among others. Check it out. It's free too!
Thank you for the replies!
Click to expand...
Click to collapse
would this work on the x1 i know it only supports qvga and vga devices i'm not sure if AC's released a version compatible with wvga phones yet if so this app is a must have
Keland44 said:
would this work on the x1 i know it only supports qvga and vga devices i'm not sure if AC's released a version compatible with wvga phones yet if so this app is a must have
Click to expand...
Click to collapse
I works on the X1, but sometimes the app fails to bring itself to the front. So it appears nothing happened when in fact the display is locked. This happens alot in landscape. To set things right again just go to portrait mode and tap the iLock icon twice (if it's already running it will shutdown itself, tap again and it starts).
EDIT!!
I found a fix for the landscape bug. Change display from direct draw to Raw Buffer.
Naffets said:
My x1 does this anyway
After being on a call for around seven seconds, the screen locks and only activates again by pressing power, hang up or answer call (Green/pickup)
No idea if this is intended...but its certainly a good idea.
Click to expand...
Click to collapse
Mine does the same, it turns off and I must press the power button to activate again..
I think that S2U2 was fun for a while but nothing more than that. What i wan't is something that uses the standard lock activated by the "No"-key and turns it on automatic. Dosen't some other WM phone have these issues?
emwdava said:
EDIT!!
I found a fix for the landscape bug. Change display from direct draw to Raw Buffer.
Click to expand...
Click to collapse
Thanks, got the same Problem and this solved it!
on my trinity it was all well and good until you need to type in an account number or credit card details while using the phone to call a bank or make a payment!
csdevctrl
Use "csdevctrl"
--->>>http://forum.xda-developers.com/showthread.php?t=386451
It can lock your device in whatever way you want...
Greets !
Hi fotoingo,
This is just what I needed - thanks.
As a non dev and just returning to WinMo after a long absence, please can you advise how I would get the hard keys on the X1 to work during a call and just disable the touchscreen?
Thanks
sthoeft said:
Thanks, got the same Problem and this solved it!
Click to expand...
Click to collapse
for all s2u2 fanatics out there. run the version 1.22 its the most stable for X1 and disable backligt check and direct draw off, never hangs or anything at all.
there are better solutions for win mo phones then s2u2, otherwise buy an iphone...
Hi,
After a couple of days playing with the HTC touch HD I noticed that I can not lock the device anymore by long pressing the end key. I have looked into the settings and it clearly states that long pressing the end key should lock the device.
whenever I long press the key I see the some screen refresh but the device is not locked.
If I switch off Touchflo3D and show the device lock on the today screen, then the device gets locked. Could this be a bug in touchflo3D?
I would hate to have to perform a hard reset just to fix this issue...
If anyone knows a solution, please let me know.
Edit: well, I found the reason why this happens. Once you setup a password for your device, it stops locking the device using long press end button. It sucks, but I can live with it...
Looks like a hardreset is the only way to go.
Lucas0511 said:
Looks like a hardreset is the only way to go.
Click to expand...
Click to collapse
If I perform a hard rerset, will I still have all the applications that came standard with the like touchflo3d and google maps? or will I need to reinstall some of the applications myself?
You will have them. It will reset to factory settings, original ROM plus all installations HTC chose to put on the HD.
this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).
indup said:
this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).
Click to expand...
Click to collapse
in my case it was working fine....until it stopped working. Looks like a bug in touchflo3d, because you can still use the default device lock from the today screen. that one works...
david-v said:
in my case it was working fine....until it stopped working. Looks like a bug in touchflo3d, because you can still use the default device lock from the today screen. that one works...
Click to expand...
Click to collapse
yes that one works when you turn touchflo off but the touchflo end key press never worked.
Can someone confirm that you no longer get a choice of action for the Long Press End Key, i.e. it locks the device and that's it. On the diamond you are able to choose an action or choose the display choice list.
Thanks, cojo
cojones said:
Can someone confirm that you no longer get a choice of action for the Long Press End Key, i.e. it locks the device and that's it. On the diamond you are able to choose an action or choose the display choice list.
Thanks, cojo
Click to expand...
Click to collapse
You can configure it. standard it will lock your device, but you can also choose to show a choice list.
david-v said:
You can configure it. standard it will lock your device, but you can also choose to show a choice list.
Click to expand...
Click to collapse
A-ha...found it, they moved it to the Button setting (not one for reading the manual). Now...what about the 'Lock all buttons on device lock' setting?!
indup said:
this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).
Click to expand...
Click to collapse
This is the same with me and I've not touched push e-mail or exchange server settings. I've only had the phone for 36 hours so not done much at all. The first thing I went to try and do was lock the phone and it didn't work. I'm reluctant to do a hard reset as it didn't work out of the box.
Did you try a hard reset? Did it solve the problem?
no i didnt try a hard reset,didnt think it was worth it just try to get the lock to work.
Has anyone else had the same problem with it not working right from the start and tried a hard reset? If so, did it solve the problem?
spikeysas said:
Has anyone else had the same problem with it not working right from the start and tried a hard reset? If so, did it solve the problem?
Click to expand...
Click to collapse
I performed a hard reset and then it worked again. But after setting up exchange, it stopped working. The device lock on the today screen still works though, but not from touchflow3d
I decided to go for it and do a hard reset. The device lock still didn't work. All I had done was follow the original setup screens after the reset. During this I set up Lock with a simple PIN and to prompt for it after an hour of inactivity. If I remove the settings from Lock I can then use Device Lock on long press End key but I can't use both.
This is rather frustrating as I had simple PIN (paranoid as had an Ef stolen a few months ago so at least this would stop them accessing any info stored directly on the device as they would have to do a hard reset to clear it) and Device Lock set up on my Elf which worked absolutely fine.
Has anybody managed to get both working together on the HD? I use the Device Lock to stop any buttons being pressed when I don't want them to be and the PIN so it's harder for people to access any of my personal info if the phone is stolen (not that I intend for this to happen again!). I really would like both to work together!
Just spoken to CS at Orange and they have no idea if this issue with only able to have either Lock or Device Lock working at any one time is specific to my device or whether everyone is affected. If anybody is able to try and let me know their results I'd be grateful as I don't know yet whether I need to send the phone back as faulty.
spikeysas said:
Just spoken to CS at Orange and they have no idea if this issue with only able to have either Lock or Device Lock working at any one time is specific to my device or whether everyone is affected. If anybody is able to try and let me know their results I'd be grateful as I don't know yet whether I need to send the phone back as faulty.
Click to expand...
Click to collapse
Just confirmed that removing the password re-enables the device lock. Nice find!
I am on Vodafone.
I assume that one of the manila files in \Windows is checking a registry entry. I wonder if it is possible to make a change that allows both functions to co-exist.
david-v said:
Edit2: well, I found the reason why this happens. Once you setup exchange server for push mail, it stops locking the device using long press end button. It sucks, but I can live with it...
Click to expand...
Click to collapse
I have Exchange with Push and still works for me.
Steve James said:
Just confirmed that removing the password re-enables the device lock. Nice find!
I am on Vodafone.
I assume that one of the manila files in \Windows is checking a registry entry. I wonder if it is possible to make a change that allows both functions to co-exist.
Click to expand...
Click to collapse
Thanks for the reply. I guess that confirms that it's not specific to my device! As I mentioned before both functions did co-exist quite happily on the original Touch (Elf) so it is possible. I wonder if it is related to the newer style TouchFlo3D and if anyone experienced the same issues on the Diamond or the Touch Pro?
I hope it is something that could be sorted with "tweaks" to certain files or registry entries. If anyone finds out how to solve it I for one would be very grateful!
tnyynt said:
I have Exchange with Push and still works for me.
Click to expand...
Click to collapse
Did your exchange policy force you to setup a password? it appears to be the problem. When you setup the device initially with a password, then you cannot lock the device anymore using the long press of the end button. Device lock in today screen always work, the problem is the long press of end button, that stops working as soon as you have a passwaord set up.
I missed the last train yesterday, because I was not able to slide and unlock S2U2, since it was stuck in landscape and wouldn't change back to portrait. I was unable to 'slide' the slider all the way to the end to unlock no matter what I tried ! The only way to get rid of it was to soft reset.
Do I need to use gyrator to disable rotating (if so could anyone tell me how ?) , or is there some setting within S2U2 which I didn't spot ?
Thanks
I have exactly the same problem, would like to know if there is anything to do about it. I have disabled it for the moment
yeah Gyrator might have problem with S2U2 this way..
I was used to disable it, it somehow worked but it's not so perfect
here a solution i'm using, but it may look a little silly when u do
--> Try rotate the phone in different orientations. The S2U2 will eventually turn into a unlockable look... and a little tip for you: If the S2U2 looks reversed (like when you're holding the phone reverse-portrait but the S2U2 is displaying in portrait mode, vice versa) and you cannot slide the unlocking bar, try slide on the position where the bar should be if it displays correctly.
it looks silly, but it works
maddie said:
yeah Gyrator might have problem with S2U2 this way..
I was used to disable it, it somehow worked but it's not so perfect
here a solution i'm using, but it may look a little silly when u do
--> Try rotate the phone in different orientations. The S2U2 will eventually turn into a unlockable look... and a little tip for you: If the S2U2 looks reversed (like when you're holding the phone reverse-portrait but the S2U2 is displaying in portrait mode, vice versa) and you cannot slide the unlocking bar, try slide on the position where the bar should be if it displays correctly.
it looks silly, but it works
Click to expand...
Click to collapse
and oh, by the way, i found it doesn't happen so often now (maybe wallpaper enabled? or it is what it used to be... no idea..)
then this solution, i think it's worth a try
I personally just hold down 'Hang Up' for a few seconds which automatically locks the phone
Easy to use, no hassle
Fallen Spartan said:
I personally just hold down 'Hang Up' for a few seconds which automatically locks the phone
Easy to use, no hassle
Click to expand...
Click to collapse
well..
we all have our habits using phones
for us uses S2U2 as a screen lock, this is the temp. solution and the best thing would be a patch for it..
Read post 226 in following thread
http://forum.xda-developers.com/showthread.php?t=446440&page=23
May provide some answers for you
Hi
I have had the same issue with S2U2 rotating but never any problems with the phone part
S2U2 is disabled in Gyrator2 but it seems that when using another app in landscape and lock the phone it does not seem to be able to rotate back quickenough before locking with s2u2
All i have done is to select unlock when stylus is removed within the S2U2 settings and now if the screen is corrupt in S2U2 i just remove the stylus and it unlocks.
sbirsen said:
I missed the last train yesterday
Click to expand...
Click to collapse
silly question perhaps, but how does the state of your cell phone make you miss the train?
machmandp said:
All i have done is to select unlock when stylus is removed within the S2U2 settings and now if the screen is corrupt in S2U2 i just remove the stylus and it unlocks.
Click to expand...
Click to collapse
yep this seems the best option so far. i've had this prob and reset the phone many times before remebering that taking out the stylus unloks it ....
gwbard said:
silly question perhaps, but how does the state of your cell phone make you miss the train?
Click to expand...
Click to collapse
i was trying to check what time the last train was leaving, and I lost very valuable (!) 4-5 minutes trying to unlock the stupid screen and when that didn't work waiting for the phone to reboot. by the time i was back online it was too late.... also no frickin' cabs on oxford street when you need them !
I want to start this threat to put together information in order to sort out why the device lock delay (see below) appears and how to solve it.
wm6.5 device lock app has changed from "tap here and next there" to a slider style like app you know from s2u2.
problem:
device lock is enabled
Code:
HKCU\ControlPanel\BackLight\AutoDeviceLockEnable=1
wake up the device by short pressing the power button
device lock screen is displayed instantly
it takes ~2 seconds until the slider of the device lock screen is activated and can be slided.
if you use device lock it becomes really annyoing.
there are some threads about this like this one, but the solution is not working on a Touch HD.
can anybody sched some light onthe problem why and where it appears or maybe someone already found a solution.
please post any useful information.
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
the only thing i can thing of is use s2u2 or any other locking app
egoist6 said:
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
Click to expand...
Click to collapse
cookiemonster55 said:
the only thing i can thing of is use s2u2 or any other locking app
Click to expand...
Click to collapse
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Zoltair Wright said:
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Click to expand...
Click to collapse
latest build 23001 still has this annoying delay
Iv noticed this too... The biggest annoyance for me is you turn the device on and the backlight isnt very bright, makes it near impossible to see the screen in daylight. Is it possible to have the backlight come on full when you press the power button?
i have this problem too. i think it is a serious bug of wm6.5
just hoping it will be fixed when the official release come out.
god i thought i was the only one, something about my config...
and i was exited about the new 6.5 lock screen,
but then it works like all the other M$ 6.5 sh!t, it doesn't
had to switch away from it
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
A1983 said:
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
Click to expand...
Click to collapse
thanks for your help - but that was the solution i am talking about in my first post and unfortunately does not work.
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
lemat1 said:
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
Click to expand...
Click to collapse
yeah. and with 6.5 23003 onwards in the top right corner an "X" (for close) appears. only when it goes off you can access the slider.
it seems as if an app is started.
pikipirs said:
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
Click to expand...
Click to collapse
great. that helped a lot!
now the lock screen is flickering shortly and the whole lock screen slides in once more from the bottom to the top but then the slider is instantly accessible.
from a time perspective a great improvement!
update:
basically you can delete the whole layer
Code:
<Layer ID="SlidePath" >
...
</Layer>
which removes the animation of the arrows and the arrows themselves.
do not delete this section if you do not know in which direction to slide the button
however, the delay is still ~1 second. but i think i can live with that allthough it is annoying to wait one stupid second to proceed
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
twopumpchump said:
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
Click to expand...
Click to collapse
thanks for your reply. but i also have the delay when simply waking up the device by pressing the power button (without receiving a call)
xternal said:
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
Click to expand...
Click to collapse
that's true. i replaced LS_SimplePinScene_480x800.cpr with an empty one and allthough not using pinlock, the lock app did not work at all.
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Not sure if this is at all possible as im not a programmer. Just a thought
xternal said:
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Click to expand...
Click to collapse
good idea. maybe someone can change LS_SimplePinScene_480x800.cpr so that it does not expect the pin from screen but is embedded directly into the cpr file?
can anybody who has a better understanding of cpr files or the lock app give us some tips?
xternal said:
Not sure if this is at all possible as im not a programmer. Just a thought
Click to expand...
Click to collapse
me neither