Hello. I have a HTC HD2 and I am very happy !!
I have a problem, when I'm using iGO8 the screen lock appears and I have to unlock the phone to see again iGO8. Any way to stop this?
Thanks!!
The best forum is here!!!!
There's a setting in igo that enables the backlight to always stay on. Further more you could install s2u2 and add igo as an exeption. Thats what i did. I find it more usefull this way cuz i can have control over what locks the screen.
Thanks! I already found this option and it works perfectly.
Thank you again.
Related
Hi guys
Does anyone know if there is a fix for this bug as mentioned on the Gyrator website help page? In fact, does anyone get this bug or just a special few??
Q. When I rotate to any new orientation, the phone application pops up, or the today/manila screen appears?
A. As you'll probably know, orientation is disabled by default on the Diamond, because the HTC developers are either too incompetent, or lazy, to build applications which are orientation aware. As such, strange things happen with either Gyrator rotates the screen, or you use any other application to do the same thing.
ed.dark said:
Hi guys
Does anyone know if there is a fix for this bug as mentioned on the Gyrator website help page? In fact, does anyone get this bug or just a special few??
Q. When I rotate to any new orientation, the phone application pops up, or the today/manila screen appears?
A. As you'll probably know, orientation is disabled by default on the Diamond, because the HTC developers are either too incompetent, or lazy, to build applications which are orientation aware. As such, strange things happen with either Gyrator rotates the screen, or you use any other application to do the same thing.
Click to expand...
Click to collapse
Yes, it is a PITA. I'm using a file called "rotator-netxscale-2003-4k-v420". It brings up a box on top of other apps to change the screen around. I have it programmed to the down volume button with AEBplus. The trick is never to switch the screen orientation while in TouchFlo3D. If you start your app first then activate the above program to change the screen it is all good, if you go to the TouchFlo 3D interface...it is not a happy camper. Unlike the normal WM Today Screen, TouchFlo3D Home is allergic to landscape.
I use Gyrator2, and TouchFLO is disabled by default in the settings, preventing it from being re-oriented if the device is turned. If you do a little searching, you'll find more threads that can help you configure Gyrator2 to stop the phone app, including incoming calls, from re-orienting. Plus, you can add any app you want in the settings. One I added was the Bubble Breaker game, which would restart a new game automatically if you turned the phone...
The same thing can also be done with MobileMagic.
Just deny auto rotation to the the apps that do not like
to be rotated or that rotate them self, like Teeter.
Thanks for the info chaps but i think that there is a bug in the system which SOMETIMES pops up the phone or manilla when i rotate an app (opera or tomtom mainly) from portrait to landscape using any method (gyrator, gsen or handymenu). It seems that these apps (phone, manilla) dont like any change of orientation even when they are in the background and opera or tomtom is rotated.
I have changed the gyrator2 .ini file to make no apps rotate except the ones i want to. Not even that works........
Any more help please?
http://forum.xda-developers.com/showthread.php?p=3044607#post3044607
Hmmm, donĀ“t have that Problem. Dunno why, but it works as it should.
Hi, just found a bug using gyrator on my new touch HD when typing a message in landscape mode. The dot (.) and comma (,) are inverted, so trying to type one of them gives the other as a result. Haven't yet tried without gyrator if the keybord gives the same problem, and will post it here later on.
Thanks
Hi there! I have a problem with S2U2 on my I8000 Omnia 2. I installed it, and tried it. It's a cool program, but the call screen is not working to me.
----------
I also have new problems with S2U2. smile.gif I don't care about the sliders anymore, I was turned all off. But when my phone rings, and I press the answer button, the phones keep ringing and not do anything. I can't accept calls with S2U2. Is this a known issue or someone have an idea how to fix this? Or I should use an other app like S2U2?
----------------------
This messages copying modoco.
Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)
S2U2 was a real pain in the ^ss up until v2.30.
I haven't had any locking issues with the new version, but some serious battery drain have been spotted. I don't mind, since I have chargers at the car, the office and any other place I need it.
It takes like 13% percent of battery overnight when the phone sleeps.
Without S2U2 I can navigate with GPS for an hour for around 10%.
i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance
Fire1986 said:
Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)
Click to expand...
Click to collapse
I am using WM6.1 and problem with s2u2 (LATEST) is that while it locks the screen nicely, it leaves the ans/end hard key exposed. This creates problem when I accidentally press them while taking phone out of the pouch. For that I had to have other arrengements as mentioned in this forum. If you had no such issues, then your OS must be of a different version. I hate machine specific softwares.
Not true
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.
I am facing a different problem with S2U2..
When I am listening to music through Touch Player, the song gets paused as soon as S2U2 activates, then I have to press the lock key and then the song plays again
When S2U2 is not running it plays the song flawless..
Any settings I need to change..?
Khisha said:
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.
Click to expand...
Click to collapse
But at the end of the day, it is not locking the ans/end lock keys which is a problem
Ps: I hv never owned an HTC
No need to use S2U2 now, I am using TouchLockPro, much much better, no more secondary gesture when power on, also the app is fully utilizing the G-sensor and the light sensor.
mokkimhong said:
i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance
Click to expand...
Click to collapse
I had the same problem that was very annoying and some of the above too...The main reason I wanted s2u2 was because I didn't want the hardware key button answer call to be enable.Sometimes I was answering calls without knowing it because it was in my bag and with all the stuff in it the button was pushed by itself...From what i see samsung herself has slides for accept or end calls, why the hardware key buttons have to work too?Do you know any trick to disable them when the phone is locked...
Thanks i n advance!
I have the same problem with my Omnia.
Using latest S2U2 (2.43) and setting an alarm with the standard Samsung app.
I have tried most probably all combinations of s2u2 and alarm settings, without any luck.
Anyone ever found a solution for this ?
Hi
I want to make my jade rotate the screen to landscape mode once I start tomtom navigator 7. I'm using gyrator but I guess not finding an accelerometer renders the application useless, although the programming capabilities should still work.
What programs do you recommend me?
thanks in advance
Win mob 6.5 has got a rotate screen app on it not sure if it works with tomtom.
I just tried it and it does work with tomtom. You must already be running tomtom then go to the start menu\apps\rotate screen then press back and finally click on tt icon and it should work.
adds420 said:
I just tried it and it does work with tomtom. You must already be running tomtom then go to the start menu\apps\rotate screen then press back and finally click on tt icon and it should work.
Click to expand...
Click to collapse
thanks, I had already tried that and it works but I'm looking for a way to do that automatically
what should i do if my screen display rotation wasn't working. When i rotate the phone over, everything display on screen wasn't moving. Please help
tuannguyen2992 said:
what should i do if my screen display rotation wasn't working. When i rotate the phone over, everything display on screen wasn't moving. Please help
Click to expand...
Click to collapse
Has it ever rotated the way you want? There's a couple of ways to make that happen, but the quickest is to just use the cab I have attached here. However, if you're running a custom ROM, you should check first to see if that ROM has the cabability built-in somehow (many do have that).
thanks my friend, that worked well
Hi, the problem happens when I use a program where i watch the screen but don't touch it for some time. Programs like Ereader and Tomtom.
Then the phone goes to the lockscreen and i have to unlock it again. Not very easy when you are driving a car
But i can't find a solution. Does anyone know the answer?