Related
Hello,
I have been using the ChuckyROM for quite some time now, and I have been very pleased. Today, when I got the phone out of my pocket, I noticed that it was completely shut down (even if it had its battery somewhere around 98% last time I checked). I started it only to see a white screen, nothing at all happening. I removed the back cover, reset the phone via the red small button, but the result was the same white screen. I decided to remove the battery, the SIM card and the SD card and leave it to cool off for 10-15 minutes. 15 minutes later, I picked it up, put everything back together, started it, and only got that annoying white screen.
I left it charging for about 3 hrs (it usually charged up in about 2 hours, tops) and the LED kept staying red, as if it was not fully charged. I disconnected it, and the LED still wouldn't go off. I tried booting it, nothing happened, at all. Soft reset via red button, and the LED went off and the phone went back to that white screen again.
Right now it is connected to my laptop, apparently charging (red LED on), and I really don't know what to do.
My ROM was ChuckyROM with the GTX Sense theme.
I'm using HSPL 1.42.HSPL.
Radio version was 2.08.50.08_2.
I also have to mention that I can get the bootloader showing up, so I might try and revert to a stock ROM, but I preferred to post here first and get some suggestions.
What can I do? Please help me!
Thanks in advance!
If I were you, I might just take my chances and install a Stock ROM. See what happens after that...
Yeah, this was my intention to be honest. Do I need to change the HSPL before doing this? And if not, can I change it back to 1.48.0000 after reverting to a stock ROM?
You don't need to revert back to a stock ROM. Just flash another custom ROM!
From what I understand, if you flash a stock ROM via USB, you will still keep HSPL. If you flash a stock ROM via Storage Card, it will take away your HSPL, and you will need to redo HSPL.
If you do go back to a stock ROM, flash using USB so you don't have to redo HSPL.
sumflipnol said:
You don't need to revert back to a stock ROM. Just flash another custom ROM!
From what I understand, if you flash a stock ROM via USB, you will still keep HSPL. If you flash a stock ROM via Storage Card, it will take away your HSPL, and you will need to redo HSPL.
If you do go back to a stock ROM, flash using USB so you don't have to redo HSPL.
Click to expand...
Click to collapse
I see, but I want to revert to a original SPL, because I will most likely take it back to service for other faults as well.
If I download a stock ROM and upload it to the SD card, everything will become stock, right?
Sorry for double-posting, but I just tried installing _HTC HD2_RUU_Leo_HTC_WWE_EastEurope_1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship, downloaded from HTC's site via USB connection while in bootloader, and it said that "the image is corrupt" and the process failed.
What now?
anrabi4 said:
I see, but I want to revert to a original SPL, because I will most likely take it back to service for other faults as well.
If I download a stock ROM and upload it to the SD card, everything will become stock, right?
Click to expand...
Click to collapse
Ah, I see what you're saying.
Yes, flashing a stock ROM from the SD-card will make it all stock.
anrabi4 said:
Sorry for double-posting, but I just tried installing _HTC HD2_RUU_Leo_HTC_WWE_EastEurope_1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship, downloaded from HTC's site via USB connection while in bootloader, and it said that "the image is corrupt" and the process failed.
What now?
Click to expand...
Click to collapse
Try re-downloading the ROM. Or you can find another stock ROM from HTC or HTCPedia.
I`m trying to download RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship.exe.
I have formatted my SD card to FAT32, but what should I try first? Going to bootloader and try to install the ROM mentioned above?
anrabi4 said:
I`m trying to download RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship.exe.
I have formatted my SD card to FAT32, but what should I try first? Going to bootloader and try to install the ROM mentioned above?
Click to expand...
Click to collapse
I feel even worse now! I have tried both ways, first using the new ROM via USB in bootloader, it said the same thing, that the image is corrupt. I then extracted ruu_signed.nbh, renamed it to LEOIMG.nbh, copied it to my FAT32 freshly-formatted SD Card, put it in the phone, and it said "Update terminate UPDATE FAIL", sticking at Radio_V2...
What can I do now? Should I try and flash another radio, or...
if that wwepmr is not your phones original stock rom, then it will fail, because it will reset your spl and then try to flash the rom, but of course it will check the region and vendor id and get a missmatch.
i would do it like this.....(no need for sd card flashing at all, that's old news)
run hspl2, make sure you have hspl installed, run the wwe file in your last post over usb, when its flashed, rerun hspl2 and choose 1.42.0000 and you're ready to send it back.
thanks for your reply, samsamuel!
unfortunately, running hspl2 seems to do nothing. I have 1.42.HSPL already installed, and I tried choosing 1.42.0000, it says it's succesfull, but my bootloader still displays 1.42.HSPL.
When trying to run the WWE, it gets stuck at 0% for 10-15 minutes, then says that the connectivity is poor.
anrabi4 said:
When trying to run the WWE, it gets stuck at 0% for 10-15 minutes, then says that the connectivity is poor.
Click to expand...
Click to collapse
that sounds like a usb timeout problem.
Boot to bootloader manually, and when 'serial' turns to 'usb' on screen, then run hspl2. Keep trying this with all your different USB ports. (USB ports around back of the PC generally work better than ports in the front.)
Just tried both the WWE and task29 through all of my laptop's ports, and I get the same result: it won't go over 0% whatever I do.
I don't understand... each of the USB ports on my laptop recognized my HD2 and successfully installed the driver in less than 10 seconds after connecting it... What could be wrong?
Honestly, I was thinking of putting it in the microwave oven for 3 or 4 seconds, just enough so the CPU gets fried, then get it to a service center and complain about how it stopped working all of a sudden...
you did try simply removing the sim & sd card and battery, reinstalling the battery, holding both volume up & down simultaneously and depressing and holding the phone disconnect button to do a hard reset, right? I just didn't see that in previous posts and figured that should be near the beginning.
Hey Guys,
I have NFI what happened to my phone but I think its bitten then dust..
I've been running NAND Android builds for a while now, the phone has been a bit funky for a few weeks now so I wanted to completely wipe and start form scratch..
So I download Task29 a new radio and ROM from the links in the ROM page (http://forum.xda-developers.com/showthread.php?t=933951) and ran Task29 like I have multiple times before.
The install went fine, and the phone rebooted like its meant to but now its stuck on the HTC screen, I can't boot in MAGLDR or HSPL...
So, is it borked??
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
samsamuel said:
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
Click to expand...
Click to collapse
The radio that was installed on before running TASK29 was, Radio Leo 2.15.50.14.
It already had HSPL v2.08 and MGLDR 1.3, already installed.
As I said, I've flashed new WinMo and Android ROM's hundreds of times, I mean I dont normally run Task29 before every install but I have multiple times in the past.
I only ran Task29 today as the phone was being really bad so I though a clean install might be the best way to go.
hmm, not sure what to suggest without sounding patronising, hehe,
there are a few people that cant seem to get magldr to start, for no good reason,
reflash the radio (just in case) manually go check the spl in bootloader again (just in case it doesnt say 2.08.hspl,, sometimes what you know for a fact is true actually isnt) and as for magldr, well its susceptible to all the usual flashing issues, , run as administrator, try every usb port, turn off your firewall,,,, try another pc even, , in fact if you have another pc available, try that first.
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
I've read something about this before. I don't think it's an easy fix and it may be best to try go back to where you bought it and try get a replacement or send it in to HTC. I'm not too sure if they'll know that you have HSPL installed. I'd say highly likely they will. Have you tried hard resetting? Or can you not get to that screen?
If you want to find more on this just google "HD2 Wsod" or "HD2 White screen of death". You'll find lots if people with the same thing.
My HD2 has something similar but I can get to HSPL but it stays at a blank white screen with normal power on.
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Skellyyy said:
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Click to expand...
Click to collapse
Thanks for the reply, when I plug the USB cable in while the phone is off, only the charge light comes up. Doesn't actually try and boot
QuazzieM said:
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
Click to expand...
Click to collapse
I know you said you ha e flashed hundreds of times, so you should know this. I am not being patronizing here either, but I will say it anyway. You have gwo different ways to flash a new radio, but both require gou to put gour HD2 into bootloader.
To put your HD2 into bootloader turn the device off and then turn it back on but hold the volume down button wbile it is booting and it will go to bootloader.
Whilr jn bootloader connect via USB cable to gour computer wait until you see USB the wbite bar of bootloader then you can flash the radio, a Win Mo ROM, HSPL, or MAGLDR just wich ever one uou want to flash at that time.
You can use a 500MB to 4GB SD card to flash the radio as well as a Win Mo ROM. You just rename the.nbh file to leoimg.nbh for the radio or the ROM and copy it to the root of your SD card. plasce the SD card back in the device. Put the device into bootloader but do not let go of the volume down botton until you see search hinge on the screen of the device. Be aware though if you flash a official ROM this way it will overwrite everything HSPL and all so you whind up with a stock HD2 again.
Stupid question: you are holding down the volume down button to boot into HSPL right?
Hey XDA
Hope someone out there have got some good advice. We have some HD2s where i work and i have been sent one that is acting kinda weird.
I simply can not get it to flash a rom (_HTC HD2_RUU_Leo_S_HTC_DAN_3.14.403.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship) - we only use normal HTC roms. When i try to flash it nothing happens, it boots into the bootloader and just sits there at 0% until i disconnect the cable, if i dont it will sit there untill it runs out of battery. Tried a few times now and same result.
i have also just tried a restore, to see if its the internal flash rom that is broken and the restore also fails. My own HD2 restores in like a few seconds but this one just sits there again, like when i try to flash a rom to it.
So is it totally dead or is there something i should try?
Have you tried to use task29 (via computer) , then flash (via nbh) the htc rom?
hmm just tried task29 and it did nothing, it booted the phone to the bootloader but no progress screen did show up. Tried it again and the phone just shut off again after showing the bootloader for a few seconds.
beginning to think this phone is toast.
Gonna try a HSPL update later and just flash a non HTC rom to see if that works.
dkwolf said:
hmm just tried task29 and it did nothing, it booted the phone to the bootloader but no progress screen did show up. Tried it again and the phone just shut off again after showing the bootloader for a few seconds.
beginning to think this phone is toast.
Gonna try a HSPL update later and just flash a non HTC rom to see if that works.
Click to expand...
Click to collapse
HSPL 2.08 & reflash original HTC ROM via PC USB.
Do you get any error codes from the flash utility ?
could be CID related but you should see error code.
Yes, trying it with HSPL seems like a good idea to me, too.
Because then you can also try other ROMs.
will try this stuff on monday - i just cba to do more work today
thx for the advice
Build a gold-card and flash from the SD slot. If that doesn't work, put it in a zip lock bag and then into the freezer for 10 minutes. After 10 minutes, boot the phone and try flashing again immediately in it's chilled state. If it get's ANY further, you have a bad overheating NAND and need a new main board.
got HSPL2.08 flashed and a Dutty 3.14 rom but phone refuses to reboot sometimes and boot just shows the white HTC background and does not show the radio/os versions in the bottom. So i am just gonna toss this one out, since its can not be serviced (supplier has gone bust).
But still havn't gotten any error codes from the phone or flash programs, other then "USB connection failed". So i think its nand is kinda broken now.
dkwolf said:
got HSPL2.08 flashed and a Dutty 3.14[/COLOR] rom but phone refuses to reboot sometimes and boot just shows the white HTC background and does not show the radio/os versions((edit - the RGD screen)) in the bottom.
Click to expand...
Click to collapse
first, you can't run 3.14 roms on anything except spl 3.03.0000 or 3.03.hspl
Second it isn't booting because it almost certainly needs an updated radio, 2.15.50 for instance. You probably still have a 2.xx.51 from the original stock, and so wont show rgd screen till you change radio, won't run smoothly till you correct the spl with hspl4
But still havn't gotten any error codes from the phone or flash programs, other then "USB connection failed". So i think its nand is kinda broken now.
Click to expand...
Click to collapse
Put phone into bootloader manually, don't use front mounted USB ports, be sure and update win mo dev center to latest ver ..... all the usual USB connection error advice. Trying another PC with a different windows variant often helps if its available.
samsamuel said:
first, you can't run 3.14 roms on anything except spl 3.03.0000 or 3.03.hspl
Second it isn't booting because it almost certainly needs an updated radio, 2.15.50 for instance. You probably still have a 2.xx.51 from the original stock, and so wont show rgd screen till you change radio, won't run smoothly till you correct the spl with hspl4
Click to expand...
Click to collapse
hmm you sure? The dutty download page says -
Things to Know how about my ROMs:
* Radio 2.15 Recommended
* HSPL 2.08 Recommended
* HSPL 3.03 doesn't support 576 RAM enabled
But i'll try to flash a 3.03HSPL and find out what happens. I did flash 2.15.50.14 radio before i flashed the Dutty rom. But gonna give it one last try.
samsamuel said:
Put phone into bootloader manually, don't use front mounted USB ports, be sure and update win mo dev center to latest ver ..... all the usual USB connection error advice. Trying another PC with a different windows variant often helps if its available.
Click to expand...
Click to collapse
Have tried two pc's now, both running Win7 32bit - its all we have now.
Ahhh gitcha, then the dutty rom mustnt be 100% 3.14 rom (I didn't check) it must use a 2.x base to enable 576ram.
In which case, if stock roms don't flash but custom did, it could be stuck radio syndrome, which you can test for with (correct, get it using your serial from HTC.com) stock rom flash from sd card (4gb or smaller, fat32). Look out for "rsa radio fail" or similar on screen.
Edit, oh you said you flashed a radio, and that went ok?
samsamuel said:
Ahhh gitcha, then the dutty rom mustnt be 100% 3.14 rom (I didn't check) it must use a 2.x base to enable 576ram.
In which case, if stock roms don't flash but custom did, it could be stuck radio syndrome, which you can test for with (correct, get it using your serial from HTC.com) stock rom flash from sd card (4gb or smaller, fat32). Look out for "rsa radio fail" or similar on screen.
Edit, oh you said you flashed a radio, and that went ok?
Click to expand...
Click to collapse
yeah HSPL2.08, HSPL3.03 and Radio is flashing just fine. The roms i have tried also flashes perfect its just will not boot afterwards. I can usually do a hardreset on it and it will boot one time. If you then shut it off and try to turn it on again it fails with the white HTC screen again.
I am toally clueless on what is wrong with it, so gonna try to figure out if we have some kind of warrenty left on it and get it switched over to another one.
Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!
calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??
ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%
do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse
demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
your phone turned off??? is your battery dead??
orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?
Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please
You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk
I've got a working HD2 running Tytungs 4.2.2 - which is great.
A friend has given me their dead HD2 to try to recover it.
When powered on it simply shows a white screen.
When I go into bootloader...the multi-coloured to screen comes up, and indicates SPL-3.03.0000
So I can't try and install HSPL as I understand it.
When I I plug in the USB cable the "serial" turns to "USB" on the bootloader screen
So I thought I'd try flashing a stock winmo rom to see if it came alive, and hopefully downgrade SPL at the same time to then move onto HSPL and Android.
I found RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
(lots of the old stock rom links are broken)
I extracted RUU_signed.nbh, renamed it LEOIMG.nbh...copied it to a blank 2gb SD card, put the card in the phone, powered on holding down the vol-down key and just got into the bootloader screen.....
So I'm stuck.....any ideas on what I could try?
Is it worth running the full Rom update utility?
is it just time to dump it?
Well I noticed the sdcard was formatted fat not fat32! Sorted that put leoimg.nbh back on it and the loader/flasher starts but fails flashing the radio.....reporting 00018003 RADIO FAIL
I tried flashing hspl with hspl4 - hoping if it worked I could try to flash a radio but no luck there....
Most stuff I am finding on searching is people like me blundering about in the dark......binning the hd2 seems a waste but I'm out of ideas on how to move forward....
blackkj said:
Well I noticed the sdcard was formatted fat not fat32! Sorted that put leoimg.nbh back on it and the loader/flasher starts but fails flashing the radio.....reporting 00018003 RADIO FAIL
I tried flashing hspl with hspl4 - hoping if it worked I could try to flash a radio but no luck there....
Most stuff I am finding on searching is people like me blundering about in the dark......binning the hd2 seems a waste but I'm out of ideas on how to move forward....
Click to expand...
Click to collapse
I've got this white screen several times now, and in most cases it worked just to take out the battery and put it back in.
Usually the problem is solved temporarily if u do a task29 and install a clean rom.
With my HD2 the problem appears randomly after 4-5 months...maybe it's some kind of a hardware issue, maybe the RAM?
As far as I see it, there is no clear solution for the white screen..
Klumpi said:
Usually the problem is solved temporarily if u do a task29 and install a clean rom.
As far as I see it, there is no clear solution for the white screen..
Click to expand...
Click to collapse
I think you are right.
I can't do a Task29 as I can't get HSPL on the HD2.....
(It's running SPL3 so I have to use HSPL4.exe and that fails to install HSLP2.08 and HSPL3.03....)
Cheers
blackkj said:
I think you are right.
I can't do a Task29 as I can't get HSPL on the HD2.....
(It's running SPL3 so I have to use HSPL4.exe and that fails to install HSLP2.08 and HSPL3.03....)
Cheers
Click to expand...
Click to collapse
have you tried the factory reset?