Related
Hello, I have some problems with my mob.phone HTC HD2: after using Flash mobile stop working, then I tried install windows and tried turn on first time and my phone shows white screan with name HTC and don`t work at all,then i tried reset and Hard reset all setings and turn on again and than screan appears again with name HTC.
When i conect my phone to pc by usb, so my pc can`t find that phone.
Can you help me with this problem.
Thank you.
you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh
copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh
phone off
hold volume down
tap power (keep volume held)
phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.
Thanks for Help.
Same problem......
I am also stuck in the white HTC screen, (R 2.06.51.07 G 15.30.50.07U D 1.66.76641). I can flash from SD card and so i tried, using the image in the latest official RRU, no way, it doesn't fix the problem.
I didnt try any unofficial rom, i just updated to the latest rom from HTC, it worked fine. The problem occurs after i had to restart the phone while trying to connect to a xifi AP...
Any idea what i should try now ?
Thanks. You saved my day.
samsamuel said:
you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh
copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh
phone off
hold volume down
tap power (keep volume held)
phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.
Click to expand...
Click to collapse
OMG! Thank you so much! I love you!!!!!! I was stuck on boot because my flash failed and i followed your instructions and now i can flash again!!! i was so worried and if it weren't for you i would be screwed. Really you are a HUGE help! Keep the good work up
how long did you guys have to wait till the htc rebooted after that flash? cause ive been waiting for over 30 minutes and i thought i made that wrong.
Note: ive used HSPL fist, then flashed it with energyleo.23547, but energyleo kept stuck in bootloader
now im pretty afraid of loosing manufactors warranty ...
well lads, pay attention: ive fixed that my problem all by myself. HINT: ive kept holding the buttons for to long, so the device got stock while starting up. so dont press the voldown-button for too long, maybe only for 2 seconds!
hard reset
Remember boys and girls - if you get stuck on the bootloader you can also do the following:
1. Remove the battery to turn the phone off, leave 3 seconds
2. Replace battery and hold down the vol down button and turn on your device to get into the bootloader
3. It should say 'serial'. Plug your USB cable in and it'll change to 'USB'
4. Flash your stock ROM as normal using ActiveSync method. This will also reinstall the SPL (in the case of people who can't get past the first white HTC screen). I did this after the first (and only) time I tried to do it the SD card method. Put my stock SPL back on my phone
EddyOS said:
4. Flash your stock ROM as normal using ActiveSync method. This will also reinstall the SPL (in the case of people who can't get past the first white HTC screen). I did this after the first (and only) time I tried to do it the SD card method. Put my stock SPL back on my phone
Click to expand...
Click to collapse
im pretty sure that flashing over usb won't do the spl. only sd card flashing can touch the spl.
When I tried to flash (after installing HSPL) using the sd card method and it bricked I went into the bootloader and it put my stock SPL back on - hence why I said if the sd card fails
EddyOS said:
When I tried to flash (after installing HSPL) using the sd card method and it bricked I went into the bootloader and it put my stock SPL back on - hence why I said if the sd card fails
Click to expand...
Click to collapse
I'd be inclined to suspect that In your case the spl was flashed during the failed sd card flash, so was already stock spl when you then flashed the stock rom over usb.(which of course being stock doesn't need hspl )
Hi Guys
I'm having the same problem, however, I bought the phone second hand. My question is how do I find out what my stock ROM is?
cheers
buddyrich_1 said:
Hi Guys
I'm having the same problem, however, I bought the phone second hand. My question is how do I find out what my stock ROM is?
cheers
Click to expand...
Click to collapse
you download HSPL, run it, and if your spl is anything else than 1.42 it will give out an error and no harm is done
Hey
Thanks for replying. Do I get the stock ROM from the HTC website, is there a way to get it as a .nbh file as I am currently on a mac.
thanks
Tokolosh said:
you download HSPL, run it, and if your spl is anything else than 1.42 it will give out an error and no harm is done
Click to expand...
Click to collapse
White Screen and HTC logo
I have found a similar problem, I flashed the HSPL rom following the instructions to the letter in the NOOB section.
Restarted my HTC HD2 having hard reset, and it would start and begin the installation and setup, once the setup completes, the software requests a soft reset, at this point my phone hangs on the white boot up screen with the HTC logo.
What am I doing wrong?
Stuck on White HTC Screen after ROM update
Why is it that, having run the HSPL update on my HD2 and checked that its successful, does my phone hang on the white HTC boot screen when it reboots after setup.
I have installed the energy rom, the most recent version. It still hangs at the boot after the rom does the soft reset...
Help please?
jrmgolem said:
Why is it that, having run the HSPL update on my HD2 and checked that its successful, does my phone hang on the white HTC boot screen when it reboots after setup.
I have installed the energy rom, the most recent version. It still hangs at the boot after the rom does the soft reset...
Help please?
Click to expand...
Click to collapse
you have installed the required radio yet?if not, boot to bootloader, flash teh radio via usb, , , restart the phone.
samsamuel said:
you have installed the required radio yet?if not, boot to bootloader, flash teh radio via usb, , , restart the phone.
Click to expand...
Click to collapse
I have now installed a 'Leo_RADIO_15.31.50.07U_2.07.51.05 **(from HTC **???? )' then re-installed the Energy Rom, but still getting stuck at the white boot screen after the first reboot, so I have now done a hard reset and the phone still hangs...
Any more ideas?
phone was working fine up until yesterday it frooze up then resarted and magldr went go go go then fatal hit 1 after that. Tried restarting it but notthing seemed to help. I tried to reflash a winmo rom but that kept hanging at the htc screen tried task 29 reflashing custom and stock winmo roms but nothing seems to work phone still goes to the bootloader and still hspl anyone have any idea how to fix this i am stumped??
MAZDROID said:
phone was working fine up until yesterday it frooze up then resarted and magldr went go go go then fatal hit 1 after that. Tried restarting it but notthing seemed to help. I tried to reflash a winmo rom but that kept hanging at the htc screen tried task 29 reflashing custom and stock winmo roms but nothing seems to work phone still goes to the bootloader and still hspl anyone have any idea how to fix this i am stumped??
Click to expand...
Click to collapse
i got this a couple times made me freak out too
all i did is removed the battery and it worked afterwards
did u try flashing a new nand android?
Yea i did but i still kept getting the same error should i try a different nand rom?
and after i reinstall a new nand rom its gets the the "reset now!" and just sits there
MAZDROID said:
and after i reinstall a new nand rom its gets the the "reset now!" and just sits there
Click to expand...
Click to collapse
Try going to bootloader - hold vol. down and press and release the power button
Then try flashing radio, hspl.2.08 and then magldr 1.11
This might help
heck i tried reflashing the radio and the hspl and the magldr all of its goes fine until when i try to install a nand rom once i do that i gets all the way to the "reset now!" and just stays there at this point i just want to get a stock winmo rom back on so i can atleast make calls this phone is my only form of communication
MAZDROID said:
heck i tried reflashing the radio and the hspl and the magldr all of its goes fine until when i try to install a nand rom once i do that i gets all the way to the "reset now!" and just stays there at this point i just want to get a stock winmo rom back on so i can atleast make calls this phone is my only form of communication
Click to expand...
Click to collapse
What is your HSPL version ? Its written on the tricoloured screen of the bootloader ? Your phone was unlocked before you tried to flash a NAND ROM ?
Try and use a task29 tool provided here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 . Extract it and run it properly ( with phone in bootloader mode ) and perform the task 29. Then flash a radio version which you can find it here http://forum.xda-developers.com/showthread.php?t=611787 . ( I suggest 2.14.50.02 )
My suggestion is to go to bootloader-tricoloured screen ( NOT Magldr ). Flash a good radio version and afterwards go back to tricoloured screen of the bootloader in order to flash a Windows Mobile ROM ( preferably a STOCK one ). Forget about NAND ROMs until you will be sure what your problem is.
PS : Very very important read for 2-3 hours ( to understand well ) what says here http://forum.xda-developers.com/showthread.php?t=609477
viperd said:
What is your HSPL version ? Its written on the tricoloured screen of the bootloader ? Your phone was unlocked before you tried to flash a NAND ROM ?
Try and use a task29 tool provided here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 . Extract it and run it properly ( with phone in bootloader mode ) and perform the task 29. Then flash a radio version which you can find it here http://forum.xda-developers.com/showthread.php?t=611787 . ( I suggest 2.14.50.02 )
My suggestion is to go to bootloader-tricoloured screen ( NOT Magldr ). Flash a good radio version and afterwards go back to tricoloured screen of the bootloader in order to flash a Windows Mobile ROM ( preferably a STOCK one ). Forget about NAND ROMs until you will be sure what your problem is.
PS : Very very important read for 2-3 hours ( to understand well ) what says here http://forum.xda-developers.com/showthread.php?t=609477
Click to expand...
Click to collapse
thanks man i followed your instructions and i am now back into winmo thanks a million times
MAZDROID said:
thanks man i followed your instructions and i am now back into winmo thanks a million times
Click to expand...
Click to collapse
I am having the same problem.
@ MAZDROID: Can you tell me the steps you did to recover your phone?
Thanks a lot.
Are you using the stock usb cable that came with the phone or some generic one?
There seems to be slight corruption while you are flashing the ROM.
Try using memtest86+ and test your computer's RAM.
LiFE1688 said:
Are you using the stock usb cable that came with the phone or some generic one?
There seems to be slight corruption while you are flashing the ROM.
Try using memtest86+ and test your computer's RAM.
Click to expand...
Click to collapse
Thanks for reply. I did not use the stock usb cable, but it was the same with the factory usb cable.
I got this problem when tried to install WP7, then got "fatal hit 1 error" when booting WP7 for the 1st time.
Now my phone is bricked with T-mobile logo. Tried to HSPL, fash radio, flash OS (with the stock one) by task 29 many times, but it did not work. All flash process are okie, but My phone is still bricked
Any way to bring the phone to factory settings? Need help for an advise. Thanks a lot
Is your's one of those 1024MB ROM T-Mobile HD2s?
I am not sure if the the SD leoimg.nbh recovery method works. It flashes the SPL back to Original, including Firmware, and RADIO.
If your HD2 only has 512MB ROM, then just download the Official HTC HD2 ROM from HTC's support site (If it is UK, then select UK, if it is USA, you are kinda S.O.L.)
Extract the RUU(something).exe file using WinZIP or WinRAR or 7-ZIP.
There will be a RUU_signed.nbh file, rename that to leoimg.nbh and put that in the ROOT folder of your FAT16/FAT32 MicroSD Card.
While holding the Volume Down button, power up the device.
It should detect the LEOIMG.nbh file and flash everything back to default.
*WARNING*
Make sure your HD2 has 512MB ROM, NOT 1024MB ROM
Make sure your MicroSD Card is formatted in FAT32 or FAT16
Make sure the the Official RUU ROM is v1.xx and NOT v3.xx
Good Luck!
BTW: The Stock Cable seems to have a DIODE soldered to it. Regular cable is fine, but it doesn't protect it from current back flow during charging.
I started with a task29 then flashed a new radio and then I reloaded a stock rom via usb since i couldn't get it to work via sd card. I was able to get the phone to start but i still am running into problems when flashing in general with the phone on multiple computers so part of the problem was solved but every now and again it just shuts of and i have to reflash
LiFE1688 said:
Is your's one of those 1024MB ROM T-Mobile HD2s?
I am not sure if the the SD leoimg.nbh recovery method works. It flashes the SPL back to Original, including Firmware, and RADIO.
If your HD2 only has 512MB ROM, then just download the Official HTC HD2 ROM from HTC's support site (If it is UK, then select UK, if it is USA, you are kinda S.O.L.)
Extract the RUU(something).exe file using WinZIP or WinRAR or 7-ZIP.
There will be a RUU_signed.nbh file, rename that to leoimg.nbh and put that in the ROOT folder of your FAT16/FAT32 MicroSD Card.
While holding the Volume Down button, power up the device.
It should detect the LEOIMG.nbh file and flash everything back to default.
*WARNING*
Make sure your HD2 has 512MB ROM, NOT 1024MB ROM
Make sure your MicroSD Card is formatted in FAT32 or FAT16
Make sure the the Official RUU ROM is v1.xx and NOT v3.xx
Good Luck!
BTW: The Stock Cable seems to have a DIODE soldered to it. Regular cable is fine, but it doesn't protect it from current back flow during charging.
Click to expand...
Click to collapse
Thanks, but mine is 1024MB ROM T-Mobile HD2s. Now whatever I flash the phone, it is still bricking, so i think it would work if I removed HSPL and bring it to the default factory.
Any idea to do this?
MAZDROID said:
I started with a task29 then flashed a new radio and then I reloaded a stock rom via usb since i couldn't get it to work via sd card. I was able to get the phone to start but i still am running into problems when flashing in general with the phone on multiple computers so part of the problem was solved but every now and again it just shuts of and i have to reflash
Click to expand...
Click to collapse
I did task 29, then updated radio 2.14 for T-MOUS, but tri-color boot loader sill comes with HSPL 2.08 which means radio was still 2.08? Then I updated factory ROM ship (OS 3.4 and radio 2.14). I can not find a Rom with only OS (not including radio)
Did you get the change of radio to 2.14 in boot loader? Where to download a factory ROM with OS for T-MOUS?
Thanks
Well, this is the thing, T-MOUS controls the ROM releases. The deal they have with HTC refrains HTC from releasing or hosting any of the ROMs. So they should be hosted on T-mobile US website.
Anyways, from what I know, there are only 3 releases so far for US T-Mobile HD2
2.10.531.1
2.13.531.1
3.14.531.1 <--- DO NOT GET THIS ONE (Contains SPL 3.03 cannot be flashed to HSPL 2.08)
After you do a RECOVERY using the bootloader, you will have to reflash the radio to one that is compatible with Android, after that you reflash the radio to one that can be used by Android. Then you install MAGDLR.
I vaguely remember rumors that using a T-mobile will lock the phone to only T-mobile. If you have an sim unlocked T-Mobile, you might lock it again.
Please do so in that order.
BTW: If your phone still can get to the BootLoader (TRI COLOR SCREEN), it is not bricked, it is just not behaving. Bricked means you can't even turn it on for some people.
OMG, they are... LOL!
http://www.t-mobile.com/wmupgrade/
My phone just reborned now. Thought it was totally die when stucking with "stick together" logo. Here are the steps I did.
1) Redo exactly step by step in this post (focus on steps: HSPL, campatible ROM, hard-reset, remove/reinstall memory card + Sim)
http://forum.xda-developers.com/showthread.php?t=609477
2) Try with different SIM CARDS for your phone. I tried 5-6 ATT cards, and only 1 works and helps to go through stick together logo. If you see these words R G B at the bottom, then you phone revives.
SO happy now! Thanks all for your previous posts
No luck
I've tried everything but nothing.
I Get the "Fatal hit 1" when I'm trying to enter AD Recovery.
I'm not able to boot it with WM stock - it just get stucked att the first HTC screen.
Anyone has an idea on how to solve this?
I've have made a few steps several times but still nothing, starting to get frustrated.
Try to flash a different size partition of cwm, see if that will get you in clock work recovery...
Sent from my HTC HD2 using XDA App
kompheak said:
Try to flash a different size partition of cwm, see if that will get you in clock work recovery...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thank you so so much! It worked!
This is how I did for you other guys how's experience the same issue.
I did all this with the HD2 Toolkit.
1. Wipe Task 29
2. Install HSPL 2.08 HSPL (Don't now if this is needed but did it anyway)
3. Install MAGLDR
4. MAGLDR Reperation with Partition 200MB Cache 8MB
Now I was able to enter AD Recovery and install zip from SD card.
Android is loading at the moment and now it started up!
Thanks once again!
Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!
calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??
ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%
do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse
demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
your phone turned off??? is your battery dead??
orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?
Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please
You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk
Hi all,
I would like to ask someone who are willing to lend me a hand.
Here comes the problem:
1. I wanna flash a NAND Android into my HD2 (not Tmous)
2. I have already flashed with HSPL2 with selection of 2.08 HSPL.
3. It went through to Windows Mobile again, nothing goes wrong untill when I am trying to flash with Magldr Bootloader with ROM Update Utility.
4. It went through again, after that the phone reboot itself and it should be displaying Magldr bootloader instead of HTC green logo stuck at the WHITE SCREEN.
5. I've tried several ways to solve it including soft-reset but still nothing happen with the same problem which is the green HTC logo stuck at the white screen.
6. Even Hard-reset with factory default reset I have tried, the process went through, but still the same problem again (YOU GUYS KNOW WHAT I MEANT).
7. So, I tried another LeoAdvanceRUU.exe which @HD2Owner had posted few months ago, the flashing process worked through but it stucked at the 0% with HTC logo at BLACK screen.
8. I kept on trying with another ROM or Radio Flashing again, again and again and it is still stucked at 0% !!! (GOSH !! I'm going to be crazy)
I really hope someone can help me out of this as I am very appreciate to those who are willing to help me. I need the phone to deal with my daily usage, please the 'PRO's out there.. ><
Thanks in advance.
P/S: The Tri-Color mode showed PB8100 - SS-BC
Did bootloader show 'SPL2.08HSPL' (or something along those lines)?
Nigeldg said:
Did bootloader show 'SPL2.08HSPL' (or something along those lines)?
Click to expand...
Click to collapse
Yes !! It does showed..coz its already HSPL-ed..but i stil duno what is happening..
you havent yet flashed a correct radio. Non tmous radios (..51.. radios) wont allow magldr to start
enter bootloader
flash 2.15.50 radio
magldr will now start
I dont drink either LOL
samsamuel said:
you havent yet flashed a correct radio. Non tmous radios (..51.. radios) wont allow magldr to start
enter bootloader
flash 2.15.50 radio
magldr will now start
Click to expand...
Click to collapse
erm, I also tried to Flash the Radio ROM, but it will stucked at HTC logo with Black Screen and also 0% wont move either..
In that case double check the spl version in bootloader. Quite often people flash "2.08.0000" by mistake instead of "2.08.hspl"
(You did instal hspl before trying the radio, right? Radios news hspl too)
samsamuel said:
In that case double check the spl version in bootloader. Quite often people flash "2.08.0000" by mistake instead of "2.08.hspl"
(You did instal hspl before trying the radio, right? Radios news hspl too)
Click to expand...
Click to collapse
yea i did install the HSPL before flashing the radio and it is done with 2.08 HSPL
but what do u mean by Radios news HSPL?
when I am flashing the radio in the bootloader, I used the common flashing technique which is using the CustomRUU with the RUU_Signed.nbh file which contains Radio 2.14.50 and then the only the problem came out.
by means every ROM that I am trying to flash, It will still stuck at 0% Black Screen with HTC logo..
oops, radios NEED hspl , lol, darned predictive txt!
ok, so sounds more like usb timeout,
enter bootloader, connect usb, count to 5, run customruu.
If that still wont work, you can flash radios from sd, just like roms. Put teh ruu_signed.nbh onto sd card, renamed leoimg.nbh, reboot into bootloader, phone will see the .nbh and flash it.
samsamuel said:
oops, radios NEED hspl , lol, darned predictive txt!
ok, so sounds more like usb timeout,
enter bootloader, connect usb, count to 5, run customruu.
If that still wont work, you can flash radios from sd, just like roms. Put teh ruu_signed.nbh onto sd card, renamed leoimg.nbh, reboot into bootloader, phone will see the .nbh and flash it.
Click to expand...
Click to collapse
erm, is the flashing will do it automatically itself ?? because I am still not able to boot into whatever OS yet. And do i need to connect the USB when the leoimg.nbh flashing if its working itself ??
no, no usb needed, put the leoimg on the sd card, card into phone, power on phone holding voldown, bootloader finds the leoimg on the card and starts the flashing process.
eXcMichael said:
erm, is the flashing will do it automatically itself ?? because I am still not able to boot into whatever OS yet. And do i need to connect the USB when the leoimg.nbh flashing if its working itself ??
Click to expand...
Click to collapse
OK THAT'S WORKING @samsamuel !!!!!
THANKS ALOT !!!
I also assume the Radio was not flashed but i just cannot find a way to do the flash, and my troubleshooting was correct.
THANKS ALOT especially @samsauel and other devs' assistance. Highly Appreciate for what you guys contributed.. really THANK YOU, ITS NOW RUNNING Hyperdroid GBX ~
Thread can be closed and for further reference.
Look for HD2 nand toolkit 4.1 on XDA developers
It's a all in one utility hand HD2.
You can also try the we site addictive tips.com , they step by step tutorials.
Hi everyone,
I'm totally lost with the HD2 my brother didn't want any more. I think he installed an android os but it couldn't launch or function correctly so I tried to have it back to his original state.
I tried the hard reset but it didn't work, the phone didn't launch.
I used the Task29, it worked and cleaned the phone. Then I tried to install the official rom 3.14 found on the htc support's page. The loading get stuck at 1% and stop to move until I get the 262 error.
I read a bit and try to understand how all of this work but I still don't get it. I tried the older version of the official rom, it worked a bit better since now the loading bar get stuck at 6 or 8 % randomly.
So now when I power on the phone it says : "Software update failed! Please try again" which I tried all yesterday long.
When I hold volume down and power on what I get on the red green blue white screen is this :
RUUNBH
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Upgrade ROM code error
Please try again
I don't know what to do to resolve my situation. I'll be grateful for any help or hints you can give me.
Looks like you are trying via USB.
You could have a corrupt nand in a wrong area or some sort of hardware error.
Just to eliminate hardware, re-download the 3.14 ROM (in case you got a corrupt file)
and extract it, put the NBH file on the root of your SD card and make sure it's called leoimg.nbh disconnect from your PC and boot into bootloader and flash from SD
btw this is a tmobile phone right?
Maywiki said:
Hi everyone,
I'm totally lost with the HD2 my brother didn't want any more. I think he installed an android os but it couldn't launch or function correctly so I tried to have it back to his original state.
I tried the hard reset but it didn't work, the phone didn't launch.
I used the Task29, it worked and cleaned the phone. Then I tried to install the official rom 3.14 found on the htc support's page. The loading get stuck at 1% and stop to move until I get the 262 error.
I read a bit and try to understand how all of this work but I still don't get it. I tried the older version of the official rom, it worked a bit better since now the loading bar get stuck at 6 or 8 % randomly.
So now when I power on the phone it says : "Software update failed! Please try again" which I tried all yesterday long.
When I hold volume down and power on what I get on the red green blue white screen is this :
RUUNBH
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Upgrade ROM code error
Please try again
I don't know what to do to resolve my situation. I'll be grateful for any help or hints you can give me.
Click to expand...
Click to collapse
Hello Maywiki,
task29 doesn't delete HSPL, that causes your troubles. May I cite from HSPL4 by Dark Forces Team:
"5) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button."
Be sure your battery is charged.
For future flashing experiences I advice you to not only "read a bit" but digging deep into it - and then re-read again.
Have fun
Getrid …
Getrid said:
Hello Maywiki,
task29 doesn't delete HSPL, that causes your troubles. May I cite from HSPL4 by Dark Forces Team:
"5) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button."
Be sure your battery is charged.
For future flashing experiences I advice you to not only "read a bit" but digging deep into it - and then re-read again.
Have fun
Getrid …
Click to expand...
Click to collapse
task29 did not cause any of his issues, after he did taask29 he tried to do what you say and flash the stock ROM but it hangs on the flash.
At no time from the bootloader should a flash just stick like that. I personally think it's a hardware failure, bad nand or something, or even a bricked radio if it keeps hanging near 1%, but you never know, the ROM he's using might be corrupt.
I still suggest you download the ROM again, put the .nbh file on your sd card like stated above and try a flash from SD.
If that fails maybe you can try to flash a custom ROM that does not include a radio and if that flashes we know we cannot flash a radio because that is what is hanging the flash.
Thanks for all your replies.
Yes I try via usb.
orangekid said:
btw this is a tmobile phone right?
Click to expand...
Click to collapse
Nope, it was bought in Belgium and it's not tied to an operator.
That's the name of the file I downloaded from the htc site : RUU_Leo_S_HTC_FRA_3.14.406.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
The problem is that I can't access the sd card. The pc knows that an htc device is connected but I can't acces the device (it doesn't show up anywhere) and the sd card. The windows mobile app doesn't find a device connected too. Could it work if I pass via another phone to put the file on the sd card ?
For future flashing experiences I advice you to not only "read a bit" but digging deep into it - and then re-read again.
Click to expand...
Click to collapse
The thing is, it's not my phone at the start. I wouldn't launch myself into flashing without a lot of reading but since I got the phone in this state it's hard to find where am I.
Maywiki said:
I tried the hard reset but it didn't work, the phone didn't launch.
Click to expand...
Click to collapse
hard reset doesnt do anything when magldr clk are there, only when winmo 6,5 is there.
The loading get stuck at 1% and stop to move until I get the 262 error.
Click to expand...
Click to collapse
it worked a bit better since now the loading bar get stuck at 6 or 8 % randomly.
Click to expand...
Click to collapse
thats bad, 8/9 is the time the radio is being flashed, and is a primary indicator of a stuck radio (which also covers stuck spl, , corrupt spl/radio/bootloader basically)
The first time, the 1% hang, is the point where a stock rom tries unsucessfully to flash the spl for the first time, either triggering teh corruption, or the first time a flash has been attempted and so teh first time bootloader notices it's corrupted, (hence the RUUNBH at teh top of bootloader, it has tried to start flashing, and encountered an error, and not dropped out of flashing mode, as you would expect for a normal failed flash)
From here on, chances are you will either
1-never get anything to flash
2-possibly get winmo custom roms (no radio, see) to flash but nothing else
3-things like task29 and hspl appear to flash, but nothing changes
try No 2 first, and then try the freezer trick,chill teh phone right down, and have an sd card ready with the leoimg.nbh ready on it ready to flash as soon as you take it out of teh freezer.
Just occasionally, people get past this type of error, probably meaning the issue was corrupt software, but usually there is no fix (except JTAG, and even that isn't always successful) possibly meaning hardware corruption of a critical area of nand.
Also, if it DOES work in the freezer, that probably means you have an overheating device.
Maywiki said:
Could it work if I pass via another phone to put the file on the sd card ?
Click to expand...
Click to collapse
yes, any method you like to copy the leoimg.nbh to the sd card is fine.
samsamuel said:
hard reset doesnt do anything when magldr clk are there, only when winmo 6,5 is there.
thats bad, 8/9 is the time the radio is being flashed, and is a primary indicator of a stuck radio (which also covers stuck spl, , corrupt spl/radio/bootloader basically)
The first time, the 1% hang, is the point where a stock rom tries unsucessfully to flash the spl for the first time, either triggering teh corruption, or the first time a flash has been attempted and so teh first time bootloader notices it's corrupted, (hence the RUUNBH at teh top of bootloader, it has tried to start flashing, and encountered an error, and not dropped out of flashing mode, as you would expect for a normal failed flash)
From here on, chances are you will either
1-never get anything to flash
2-possibly get winmo custom roms (no radio, see) to flash but nothing else
3-things like task29 and hspl appear to flash, but nothing changes
try No 2 first, and then try the freezer trick,chill teh phone right down, and have an sd card ready with the leoimg.nbh ready on it ready to flash as soon as you take it out of teh freezer.
Just occasionally, people get past this type of error, probably meaning the issue was corrupt software, but usually there is no fix (except JTAG, and even that isn't always successful) possibly meaning hardware corruption of a critical area of nand.
Also, if it DOES work in the freezer, that probably means you have an overheating device.
yes, any method you like to copy the leoimg.nbh to the sd card is fine.
Click to expand...
Click to collapse
Yeah exactly where I was going with this.
Use a USB SD card reader thing to put it on SD card, or even another phone if you have to.
Try a custom ROM maybe.
If you are running 2.15.00 you don't need to flash another radio anyways, and since you have HSPL you don't need another SPL either, so you're not quite as screwed as some others even if you've got a bad radio/no flash situation.
So I did what you said (except put the phone in the freezer).
The installation went ok. Once finished it said nothing so I guessed I had to restart the phone.
Now the phone gets stuck in a white screen with htc in green on it.
Did I make something wrong ?
Maywiki said:
So I did what you said (except put the phone in the freezer).
The installation went ok. Once finished it said nothing so I guessed I had to restart the phone.
Now the phone gets stuck in a white screen with htc in green on it.
Did I make something wrong ?
Click to expand...
Click to collapse
No, either your flashed task29 then no rom or it's not loading the ROM,
try the SD flash again with the CORRECT rom and see what happens.
orangekid said:
No, either your flashed task29 then no rom or it's not loading the ROM,
try the SD flash again with the CORRECT rom and see what happens.
Click to expand...
Click to collapse
I tried again with the 3.14.406.2 from the support site, the update goes without a problem :
RADIO_V2 - OK
RCUST - OK
BOOTLOADER - OK
SPLASH1 - OK
OS - OK
CONFIGDATA - OK
RUU_WALLPAPER1 - OK
RUU_WALLPAPER2_ OK
Update Complete
UPDATE SUCCESS
When I reset, the phone vibrate seven times and stay on the white page with the htc logo on it.
What do I have to do now ? Try another rom ?
Hmmm, radio_v2 OK, ,, that's unexpected, but doesn't necessarily change anything.. .
Give the freezer trick a few goes.
Maywiki said:
I tried again with the 3.14.406.2 from the support site, the update goes without a problem :
RADIO_V2 - OK
RCUST - OK
BOOTLOADER - OK
SPLASH1 - OK
OS - OK
CONFIGDATA - OK
RUU_WALLPAPER1 - OK
RUU_WALLPAPER2_ OK
Update Complete
UPDATE SUCCESS
When I reset, the phone vibrate seven times and stay on the white page with the htc logo on it.
What do I have to do now ? Try another rom ?
Click to expand...
Click to collapse
Sounds like your chip is overheating, not good. You need a main board replacement or maybe this:
http://forum.xda-developers.com/showthread.php?t=982454
or see if this guy will donate his
http://forum.xda-developers.com/showthread.php?t=1890582
That's what I think is wrong.
Take out the battery and put it and the phone in a baggy in the freezer for 15 minutes, then put in the battery and turn on the phone. It should load WM6.5 before freezing again...
samsamuel said:
Hmmm, radio_v2 OK, ,, that's unexpected, but doesn't necessarily change anything.. .
Give the freezer trick a few goes.
Click to expand...
Click to collapse
Ok, now I need an explanation. How the hell does this trick work ? I did what you said and now the phone works. What's the mystery behind this ?
Is it permanent or it will need to be done frequently ?
orangekid said:
Sounds like your chip is overheating, not good. You need a main board replacement or maybe this:
http://forum.xda-developers.com/showthread.php?t=982454
or see if this guy will donate his
http://forum.xda-developers.com/showthread.php?t=1890582
That's what I think is wrong.
Take out the battery and put it and the phone in a baggy in the freezer for 15 minutes, then put in the battery and turn on the phone. It should load WM6.5 before freezing again...
Click to expand...
Click to collapse
Thanks for the tips, but I got the phone for free and it was mean to be left alone somewhere on a desk. If the problem come again, I'll get a new phone. And I'm not ready to change a main board by myself, I have two left hand.
Maywiki said:
Ok, now I need an explanation. How the hell does this trick work ? I did what you said and now the phone works. What's the mystery behind this ?
Is it permanent or it will need to be done frequently ?
Thanks for the tips, but I got the phone for free and it was mean to be left alone somewhere on a desk. If the problem come again, I'll get a new phone. And I'm not ready to change a main board by myself, I have two left hand.
Click to expand...
Click to collapse
The trick works because your chip is overheating. This is a common HD2 problem. When you freeze the phone the chip cools enough to boot the OS, and it may run fine for a few minutes. Play a video or do anything that heats up the processor at all and it will reboot and get stuck on bootloader again. It is a hardware issue that can only be solved by one of the methods I mentioned above.
orangekid said:
The trick works because your chip is overheating. This is a common HD2 problem. When you freeze the phone the chip cools enough to boot the OS, and it may run fine for a few minutes. Play a video or do anything that heats up the processor at all and it will reboot and get stuck on bootloader again. It is a hardware issue that can only be solved by one of the methods I mentioned above.
Click to expand...
Click to collapse
Yep you're right, it can't stand a video. Thank you anyway :good: