Hello!!!
The problem is that when I'm working with device in can turn of by it self and don't turn on when i put in changer red led glows after some time it can turn on by itself ... I think the problem is in power keys that are marked by 1 in picture or power controller 2.
Sorry for my english i speak rusian...
Thanks for help...
I have a problem , when i tried to update my device it erased rom and when it started uploading os it shut down and error mesage apeared i don't knew what to do help me please!!!
I finaly downgrade to wm2003se rom but problem doesn't desapeare...This pda every time shutdown it self when i take battery and put it back it don't turn on.I need to whait and after some time it can tur on by itself
I don't knew what to do maybe someone here knew electronics
and can hel me with this problem...
Or may be i can find somewhere electronical scheme of mda or of mda's power...
i also have this problem, i also change a new battery, same problem.
it's only operate for a while (3mins - 1hour ) when i lucky,
after that restart, restart....can't load windows....
any Master can't help.
I need to find power controller but i don't knew where to get it...
My O2 xda ii also has such a problem. Also the phone couldn't last for 8 hrs in standby mode.
I'll try to replace power controler if I find it and post here results !!!
hi, sorry for ma english, Now huge thanks to all who continue to help me here. i have the htc p3300, no branding. i want to flash my htc. have already done so few times no problems. but this time i think i have a problem with a bootloader. it was not even to flash. A reset, and now it no longer work. At the beginning it was still remained black. I still hear the "blink" or "dong" or whatever I should call it when I connect it with my pc. But no visible connection. Have Vista. Now, I have it in the socket, but will not see the light lit. . Have tried various roms up again to draw even original of o2 or t-mobile but always from the break because no connection recognize ... to really please help
Maybe its only the backlight that is not working.
rhino666 said:
Maybe its only the backlight that is not working.
Click to expand...
Click to collapse
hmm... i think that isn´t the reason because it give not a reaction when i connect it with my pc. and no reaction when i chage it, no light. u understand??
HI ! In the firsth place sorry for my bad english.
I have had a titan for about 6-7 months and a week ago it stopped working without a reason.
It stopped responding and after a reset it only shows the starting logo, and after that the screen slowly shifts to pure white colour and I can hear a one "beep" sound.
I tried to hard reset it and everything but without any luck. It charges the battery fine when connected to a USB port (orange light),
after turning it on i get the green ligh, main branded logo and some numbers (M05 S04 B06 D 3.60 and 2 lines of other numbers but they show only for like half a second and disappear so i cant write them down)
after that nothing, the logo screen goes all white, with some "notification" sound and thats all.
When connected to PC It gets detected as "something" and I cant use any flashing software because it says that it did not detect the device,
one time It got detected as some modem device. Is there any way to bring it back to life ? or is it bricked permanently ?
Please Help
And Thank You in Advance !!
Update: I managed to make a connection between my PDA and PC
it is detected as "Microsoft windows mobile adapter #2", and my PDA_PC is detected in My Computer,
but when I try to flash it the software detects it i get the message to wait 5 min till the flash is over but
as soon as this message appears my PDA is getting disconnected and i get an connection error...
help ;(
Ah... and one more thing, I dont know if it matters but when i open my PDAs memory the windows folder appears to be deleted...
can any one zip their windows folder and give me a link to it... maybe that will help ;(
I have the same problem on my Mogul with connecting to my Computer! For some odd reason it won't sync and restarts my computer automatically!! WEIRD!? Just go check out some of the Unbricking posts or Google it- they may help you!
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...
hi
i have one hp ipaq hw6915 when i power on, only appears hp logo, in the up side of the screen i can read 'serial' and down side i have, vG. 39.
nothing more happens, i hva try soft and hard reset but nothing change.
i don't know nothing about this machines, how to flash or repair.
can anybody help me with this?
thanks