Related
Ok, I will try to make my probmen more clear...
I bought my Prophet (QTEK S200) in March and everything has been working fine (also bluetooth) till few weeks ago when, all of a sudden, my prophet start taking more than 4 minutes to boot. I try removing some hacks or uninstalling soem programs, but nothing. After few weeks I realise that actually also BT is not working: in comm manag, there should be an X on the BT button when turned off, but I see none; instead the BT icon is green but the blu led is not blinking. I try clicking on he BT button several times, but nothing changes: still the icon is green, no X and no blue led. I try also with SETTINGS > BLUETOOTH > MODE tab: I check the "Turn on BT" box and press ok, but nothing, because when go back to the tab the box is not checked anymore.
Yesterday I uninstalled an old version of Skype and installed the nw one, turned on my WIFI and chatted for a while: all ok. Then I open PIE and browse some sites and all of a sudden the prophet freezes. I soft reset (with the stylus) and guess what: the prophet takes less than 2 minutes to boot. I try to soft reset few more times: same fast boot. So I go and check the BT: it works properly now!!!!!
An finally I plug the USB cable to sync the prophet with Active Sync 4.2: sync is done. Then I soft reset again and guess what?!?!?! 5 minutes to boot and no BT working!!! SGRUNT!!!!!
Ok, I say, time for a hard reset: I press the two buttons on the left side and I use the stylus, press green button at prompt and hard reset starts. Guess what? The prophet takes 5 minutes to reach he windows logo and the first time wizard. I try 3 more times, same result. And when the prophet is up and running (after restore of original settings) BT is still not working...
I do not know what to think. To me it looks that the BT problem and the long boot are related. Any help would be appreciated.
Thanks
Try the Hardreset. If the device will work well after that - it is just software problem. If no - sorry...
As i said, I tried hard reser, and still not working
thegios said:
As i said, I tried hard reser, and still not working
Click to expand...
Click to collapse
Sorry, i missed that!
oh cmon, no one had the same problem?
am i the only one?
lucky me ))))
thegios said:
oh cmon, no one had the same problem?
am i the only one?
lucky me ))))
Click to expand...
Click to collapse
not you alone .. me tooooo the same as you i feel that you like talk about me
its the same and im looking now for schematics for the phone
any one can help !!! please
Hi there,
i'm also having lot of troubles with my Prophet.
My opinion, but not sure as many other are using it successfully, it that it comes from the A2DP patch.
It started by the phone feature. I can't use it without using the Bluetooth headset (without headset, i have only noise in the speaker, also in the headphone plugged on the bottom). Then it started with Bluetooth that woudln't turn on. So no way to make calls anymore (shame for a phone...). And from this evening, i see issues also with WLAN!!! I can't turn it on.
Hard reset, flashing a new ROM, Radio ROM doesn't change anything.
I am desperated, i now need to flash it back to German O2 ROM and give it to repair to O2. Hoping they will not see it has been flashed with other ROM.
btw: could someone taking German <please> find me an adress for an O2 shop near Aachen? I can't find by myself on the O2 web pages. Many thanks in advance.
NO BT!!!
thegios, I exactly have the same problem, did you find a solution to your problem? NO BT, 5 minutes boot up time!!!
gvural said:
thegios, I exactly have the same problem, did you find a solution to your problem? NO BT, 5 minutes boot up time!!!
Click to expand...
Click to collapse
telephone replaced... (under warranty luckly...)
it looks like the broken bluetooth affects somehow the boot procedure
Oh no... I have this exact same issue... so it must be the ad2p hack... did we all have this? My phone take 5 minutes to boot and no BT too.... exactly the same!!! check my threads~~!
I did no ad2p hack
m... so the dealer wasn't able to repair it? i already have a mother board replacement... i don't want another one...
repair? do u think that for them it's cheaper to repair than to replace?
the dealer we have here seems to beleive so... they refuse to give replacements. and all they do is provide shotty repairs so you have to keep going back. its frustrating. This phone has caused me a lot of headaches.
I bought it in a big mall, so what the shop did is to package it and send it to the dealer and in 8 days i got back my same phone with simply the WHOLE motherboard replaced, which means new rom, new mac address, new everything
only front and back cover are the same
maybe.... cos I found a tape to cover infrared, so maybe they kept nly front cover, since also the power button feels different (not it is harder to push it)
loki bluetooth problem
thegios said:
oh cmon, no one had the same problem?
am i the only one?
lucky me ))))
Click to expand...
Click to collapse
myself too !!!!!
i have done all you said but same problems
i noticed that when you got windows mobile screen if you dont see the blue light
you can anyway reboot cause you wont got bluetooth at the end of the boot
when i associate a bluetooth gps, it s sucks...
anyway i m in the same s**** .
i think it's a hardware problem....
waitin for any another experiment to solve this f*** problem...
its a hardware... I installed a new rom and bluetooth worked until it was reboot... and also it would stop working when i left the phone alone for a few hours... MB had to be replaced...
my prophet also needs more than 4 minutes to boot. but my bluetooth is working and i don't see any other error. what can i do?
HTC Polaris, Cruise P3650 dead don't charge, don't turn on, nothing
Hello! I have changed the ROM and now my HTC Polaris is dead. If I try to charge there is no red or green light, if i try to turn it on nothing happens, if i try to do bootloader mode nothing happens.
Any idea how to solve it? Please help
abuwassim said:
HTC Polaris, Cruise P3650 dead don't charge, don't turn on, nothing
Hello! I have changed the ROM and now my HTC Polaris is dead. If I try to charge there is no red or green light, if i try to turn it on nothing happens, if i try to do bootloader mode nothing happens.
Any idea how to solve it? Please help
Click to expand...
Click to collapse
sound like hardware problem. you will probably need to take it to a repair centre.
Happened to me suddenly. Had to send it in to be fixed. Turned out to be the battery.
hi i had the same Problem, i returned it to repair center.
they changed me the mothercard...
it was the mini-usb plug which didnt work so couldnt charge & couldnt connect to PC.
erisnake said:
hi i had the same Problem, i returned it to repair center.
they changed me the mothercard...
it was the mini-usb plug which didnt work so couldnt charge & couldnt connect to PC.
Click to expand...
Click to collapse
tkanks alot
erisnake said:
hi i had the same Problem, i returned it to repair center.
they changed me the mothercard...
it was the mini-usb plug which didnt work so couldnt charge & couldnt connect to PC.
Click to expand...
Click to collapse
tkanks alot
cr1960 said:
sound like hardware problem. you will probably need to take it to a repair centre.
Click to expand...
Click to collapse
tkanks alot
abuwassim said:
HTC Polaris, Cruise P3650 dead don't charge, don't turn on, nothing
Hello! I have changed the ROM and now my HTC Polaris is dead. If I try to charge there is no red or green light, if i try to turn it on nothing happens, if i try to do bootloader mode nothing happens.
Any idea how to solve it? Please help
Click to expand...
Click to collapse
would be interesting, what ROM did you flashed?
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...
Hi im from Germany,
i tried to flash my Acer S200 but it stopped by 50% and i have pluged the cable out. I cant turn it on, it gives no signal, i cant bring it to the download mode. Nothing is working no hardreset with buttons.Nothing is working and when i plug it to usb the LED isnt blinking
Sorry for my bad english ..
my phone is new, it has garanty, should i contact the acer support or can anyone help me ?
Hold volume up/vol down button + reset until you see "clean boot"
i tried it the phone gives no signal .. no clean boot is coming .. the rom flashing was at 50% i think it is breaked
but thank you
did you try removing then replacing the battery. then try bootloader mode again?
yes i tried but nothing is working i cant enter the bootloader nothing is working it is just off no vibration nothin is working
sorry, but I have to ask, are pressing then holding vol down +power +camera buttons
at the same time until blinking red light starts?
you have to get into bootloader mode then flash a custom rom
brainmaster has a few including a "clean" rom.
I had this happen awhile ago and tried so many things for 2 days that now I don't
remember what actually worked! But I don't think that your S200 is bricked.
Also, make sure that you keep the power cable pluuged in (not usb)
you need a good charge even if you don't see the green light.
just keep trying and if I can remember I let you know.
or someone here will help you to find a solution!
thank you for your help but there is no light blinking. Also when i plug it to charge no light is going on. it doesnt charge the battery. i hope you can remember
i already know how to flash a rom but the phone doesnt give any sign
sorry I can't remember but you should ask brainmaster and maybe he can really help.
And he speaks german= )
thank you i will send him my problem
Any solution
Hi. I kind of found myself in the same situation. My acer s200 is unresponsive, no blinking lights no matter key/reset combinations. Had been in the middle of flashing on a new ROM when it got accidentally disconnected.
Any possible solution? Already checked the battery out in a different phone and it's fine and charged.
Hey,
i don't want to looks like a vultur, but if some of you can't find a solution to resolve the problem you have, I'm interested by the device because I need some piece. Of course I hope you can resolve your problem but if there are no led blinking, the last possibility is to send it to acer, and if you don't want to wait/pay/or whatever to with the acer support, I'm interested by your device.
Arto
Vulture indeed!! I'm need of help man.
you still need help?????
Hey GarcoG. Yes, still in need of help. My S200 is currently a desktop paperweight at home. It's a beautiful paperweight but it was made for so much more. Would really like to get it up and running again.
A new thing I noticed. I'm able to charge my phone's battery to full on my friend's s200. Of course when I put it back into my phone, it's still completely unresposive. However, I noticed that whenever I put it back into my friend's phone, the charge on it has reduced. I'm pretty sure it's not a battery issue I have since my phone is still unresponsive with my friend's battery in it and the same happens with that battery as well.
Would really appreciate any ideas on fixing this.
Hi, count me in. I just jumped on your wagon.. will try to disassemble this beauty soon before I officially demote it to a shiny paperweight.. well it's not that shiny, i put on a matte screen protector on it
Really funny about that matte screen protector. Cannot wait for the results. In my case, phone got accidentally connected just as it had reached the stage of flashing on the new ROM. Was thinking it was probably unresponsive because the ROM instructions that enable it respond to key combinations are absent hence cant get it into Bootloader mode.
@ incognito_tkd: Any luck with the disassembly? Would like to know your findings.
I have same problem... same situation
But... when I connect my USB charger, it shows red LED on... as if the charging is ON. But no reaction
Any one help please
there is no possibility to repair the phone... you have to send it to acer !!
i got my phone 1month after i´ve send it
So, my aunt gave me a hd2 she found yesterday and i currently have no idea on how to fix it and to make it usable. Currently the phone is able to charge with an orange light poping up. However, when i try turning it on, It vibarates once and only a black screen lights up. I tried googling the problem and so far, trying to hard reset or run bootloader only results in a black screen. Is the phone fubar or is there any hope of fixing it? thank you in advance.
plug it into a usb on PC with WMDC installed & run a rom updater & see if detects device.
Some links for HTC roms can be found in wiki & also the hard rest & bootloader key sequence ...
Make sure you know what what model you got before commencing with actual flashing though.
Too many Hd2 T-Mobile USA (TMOUS) die in the hands of the noob so read first ...
sng97 said:
So, my aunt gave me a hd2 she found yesterday and i currently have no idea on how to fix it and to make it usable. Currently the phone is able to charge with an orange light poping up. However, when i try turning it on, It vibarates once and only a black screen lights up. I tried googling the problem and so far, trying to hard reset or run bootloader only results in a black screen. Is the phone fubar or is there any hope of fixing it? thank you in advance.
Click to expand...
Click to collapse
IMO it's more likely to be a faulty LCD or something related to(a faulty LCD motherboard connector)...
Could be, does it detect in WMDC, have you tried MyMobiler (link in my sig).
If turn it on do any buttons seem to function, doyou get any audio feedback when volume pressed up & down ?
could it be karma ?
where did your gran find phone ?
Sent from my GT-P1000 using xda premium