I got a qtek 9100 and when i soft reset my device the boot screen start with the back light after a few seconds shuts off and then goes to the windows mobile screen without the back light. the windows mobile screen does not go away. I tried hard reseting it also and the same thing happens. Can anybody tell me what the problem could be and some solutions. thanks for ur help guys
Is there another way to HARD RESET HP IPAQ hw6915?
I want clean reset clears all user-installed settings, programs, and data, and restores your HP iPAQ to factory settings.
To perform a clean reset and return your HP iPAQ to factory settings:
1.Press and hold the Answer/Send, Power, and End Call buttons.
2.While holding these buttons, use the stylus to lightly press the *Reset button (*can't use broken reset button)...on the bottom of the HP iPAQ until the device restarts.
3.When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the Reset button...
So please help if you know another way
I don't know if it'll function...
try psshut http://ppcsoft.narod.ru/english/
it has a command for hard reset
let us know if it'll function
Hard reset
my phone is freezing, the screen shows
"USB
HP Logo
vG39" after update
I can't install any program on phone,
THX for help
If there no response after trying to hard reset i believe that you must return it to closest HP comp or representative for recostruction.
i had the same problem 2 months ago.
if it is in guarantee just say that it happened after a soft reset , nothing more.
there will be no charge i believe, at least that is what happened to me.
hope been helpfull .
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...
Hello everyone!
i've recently got a new Elf, and after installing my MUI, the windows performed a soft reset, and after it did, the blue windows mobile "Loading" screen appears, and than it turns to the green "Windows mobile" screen (those whice appear while loading) and than it gets stucked.
i tried to performe a hard reset, and i've seen videos of howto, and i spoke with a HTC lab in my country, and they all told me the same - Hard reset.
i pushed TALK+END and than pushed in and out the Stylus, it does resets itself but the first thing i see on the screen is the blue windows mobile loading screen.
it like it skips the boot level (which can't be, since windows lauched).
so what can i do?
is there anyway to reinstall windows mobile without a need to connect the Elf to the PC using ActiveSync?
Thanks in advance!
Or.
hard reset
as u have got a new one dont try too much on that... n check this if u have done the right thing...http://farm3.static.flickr.com/2173/2193904710_88f0aa424f.jpg
release the end and call button only after u push n release the soft reset button.
STILL A PROBLEM
take it to the dealer you should be having warranty.. dont spoil it.. he he..
vinoob
it still doesn't work, and i have no warranty since no one salesw this model in Israel.
any other suggestion?
BTW, when i press Talk+End, and than reset and before release the reset Enter, it shows a blue empty screen, and than it shows the Blue loading screen.
It works!
Thanks.
sorry for my bad english, i have ipaq 914c, ...i cant turn on it, because update crash in 50%, and combination buttons (record+ok+reset and etc). not work, but if i connect it to PC, so red light on top side of phone turn on, and PC find "unknow device" (i have windows 7 x86)...please help me, i need phone for navigation (GPS)
thank a lot...
Try this
Hi!
Try this tutorial at the forum:
http://forum.xda-developers.com/showthread.php?t=459123
Or this:
http://forum.xda-developers.com/showthread.php?t=511548
I hope you can solve your problem
Bye