Hi my phone was playing up the last few days needing reset all the time so I reinstalled the rom and the phone was running great until yesterday I insalled sim city 2000 which worked no probs but I couldnt exit the program so done a soft reset and now all I get is a pure white screen it does nothing at all. any ideas ???
cheers
Also the dpad buttons are getting very hot . its as if the phone is working as when I connect to usb active sync will do its stuff and I can browse the software on the phone using windows. But just cant see anything but a white sceen on the device itself.
Anyone any ideas
Please :?
I tried installing spb pocket plus and, just after it installed, my Wizard didn't seem to be responding so I tried soft resetting it. On booting up it showed the O2 splash screen and then the Windows Mobile screen but nothing else. The screen goes dark as the backlight is turned off but you can still see the Windows Mobile screen showing. Each time I soft reset the same thing happens.
I've tried soft resetting about 4-5 times now and the same thing happens again. I've even taken the battery out and put it back in and the same thing happens. I was going to try reinstalling the O2 XDA firmware but as I can't get the Wizard to connect to ActiveSync I can't do that.
Has anyone got any ideas? At the moment I'm without my phone & all the PDA functions on the phone and I really want it back.
Thanks for any advice.
Matthew
Think you may need to do a hard reset to put it back to it's factory state. Should work then.
Thanks, I'd been trying to do a hard reset but it didn't seem to work - then it occurred to me that I was actually pressing the wrong button to confirm the reset!
Hard reset works and gets it up and running again although, from checking, it seems that there's some problem between sdp pocket plus (3.0.0.3888) as I've now installed that about 3-4 times and each time, after doing a soft reset, the Wizard crashes and won't respond.
Hallo everyone and thanks for your help.
I did a soft reset on my pcc and after loading the HTC splash screen, the display stand with LOADING fixed in the middle , the green light blinks and after 1 minute the dispaly goes off. And I can do nothing, neither access using activesync or the softkeys. The phone seems working becuase if i do a phone call to my devices i have the answering tone (bu the ppc doesn't ring).
So...Any idea?
Thanks for your help.
GLF
Some programs that you installed crashed during the init...
If you did install some programs with a safe mode, you it may be saved - otherwise hard reset is inevitable...
recently my xda neo been working so slow. The peak is when i was playing a game on it, it hanged. I thinked its just my neo take some time to load so just let it on. After several mins, it suddenly went off and i cant turn it back on. And the saddest thing is i lost my usb cable and cant connect my device to my pc. I heard about bootloader, whats that actually do? Any idea how to solve this? Help will be much appreciated. Thanks in advance.
Hard reset
Try hard reset....i also have a xda neo & have similar problem after i installed hangman(i know...lol)....hard reset & done....to hard reset go 2 clear storage in setting & press 1234...if u have tried it...i read it one thread...user had similar problem & found out battery died...
RieLL said:
recently my xda neo been working so slow. The peak is when i was playing a game on it, it hanged. I thinked its just my neo take some time to load so just let it on. After several mins, it suddenly went off and i cant turn it back on. And the saddest thing is i lost my usb cable and cant connect my device to my pc. I heard about bootloader, whats that actually do? Any idea how to solve this? Help will be much appreciated. Thanks in advance.
Click to expand...
Click to collapse
Dude,
You can Hard Rest your device through Clearstore only when the device is running. I assume your device is not powering on, so Hold the Camera Button and the Third button i.e, the Comm button and with your stylus push the reset button. Hold the first two buttons till your get factory reset message on the screen. Once on that screen, press the green button, ie. the call making button. The device will restore itself to the factory settings.
Good luck.
Please help me, nothing happened my qtek s200 is dead i have the same problem suddenly it turned off and never went on again, i replaced the battery and nothing happened just a red light turn on when i connect it to the wall charger. Please help
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...