Hello!!!
The problem is that when I'm working with device in can turn of by it self and don't turn on when i put in changer red led glows after some time it can turn on by itself ... I think the problem is in power keys that are marked by 1 in picture or power controller 2.
Sorry for my english i speak rusian...
Thanks for help...
I have a problem , when i tried to update my device it erased rom and when it started uploading os it shut down and error mesage apeared i don't knew what to do help me please!!!
I finaly downgrade to wm2003se rom but problem doesn't desapeare...This pda every time shutdown it self when i take battery and put it back it don't turn on.I need to whait and after some time it can tur on by itself
I don't knew what to do maybe someone here knew electronics
and can hel me with this problem...
Or may be i can find somewhere electronical scheme of mda or of mda's power...
i also have this problem, i also change a new battery, same problem.
it's only operate for a while (3mins - 1hour ) when i lucky,
after that restart, restart....can't load windows....
any Master can't help.
I need to find power controller but i don't knew where to get it...
My O2 xda ii also has such a problem. Also the phone couldn't last for 8 hrs in standby mode.
I'll try to replace power controler if I find it and post here results !!!
Related
Hi All,
My O2 mini got problem with standby mode If i don't press power button to switch to standby mode is OK but when I press power button then screen will be turned off, later on I can't turn it on by press power button again. I tried to call my number the phone is ringing and signal light is blinking but the MOST important that I can't answer the call or turn my O2 mini back to normal mode to play. The only way is soft reset and use it without switching to standby mode.
One more thing If i turn it off for 03s only then I can turn on but more than 03s I can't
Anybody know what happened to my phone ? Your help is highly appreciated.
Best REgards,
vatana.
are you sure the backlight is not down? make sure the backlight is up enough when running on battery and on power.
settings > power
I have been, I'm sure the battery is full. I try up any ROM(1.03,1.05,1.11....) but It still not OK !!!
Somebody help me !!!!!!
Thanks Vini.
Backlight is OK not down.
Anybody has experience on it ?
Thanks to All
Pls help me to fix it.
Thanks !
Anybody help us !!!!!!!
Tinh hinh nay thi chi co nuoc anh em minh tu sua thoi anh oi !
Up !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11111 Help !!!!!!!!!!!!!!!!!!!!
i also have the same problem before. Last time I think it was viruses and I try to hard reset my Imate Jam, after that until now is already ok.
I suggest you follow the hard-reset advice. If that doesn't solve your probs. see if you can trade it in.
Bypass with a today plugin, like dktoday (easy switch to standby, BT on/off, displays current act. network...)
Success, M
Thax ! But not sussecful ! I try it many times !!!
stand by problem
hi even i am having the same problem no solutions as such
i think the LCD display is gone or else loosing sufficiant power supply
now i am using NOKIA for time being
help us please
You may call PPCTECHS
Hi,
I had a serious screen problem in the past: My 15 LBs bowling ball droped over my JAM and crashed the screen while blending the case!!
I sent my device to www.ppctechs.com for repairing and now its OK.
They have 2 types of service: partial and full system repair.
You may call PPCTECHS
Hi,
I had a serious screen problem in the past: My 15 LBs bowling ball droped over my JAM and crashed the screen while blending the case!!
I sent my device to www.ppctechs.com for repairing and now its OK.
They have 2 types of service: partial and full system repair.
Hi All,
if i am starting my magician over the button "on" at the right upper corner, my pocket pc is booting.
The pocket pc work fine since two years. For that reason, I do not think it is a ROM-problem. It is not the original ROM-Image, but
Have anyone a idear ?
My last option is to flash a new ROM Version.
Thanks for help.
Regards
garciahelp
same as me..
you got a problem that i ever face.
But i thought its just only your battery need to be charged...
my o2 xda ii mini always restart if the battery level reach 15%....
and finally there is message no enough power to run SD card.
After I recharge it, problem gone
Hello,
My T-Mobile MDA suddenly had no power and so i thought the AKKU was broken.
I put in a new one, but after it boots ,it stays a few seconds in the Windows 2003 Start screen, where you can calibrate the screen and after a few seconds
it starts to boot again and this happens again and again.
I thought maybe its a problem, which is already known in this forum and so i would like to ask if someone had this problem please let me know if theres a solution and tell me how to solve this.
thank you for your help
using a fully charged battery (from a friend?) try reflashing again.
Thank you for this idea.
I tried this, but it didn't change anything..
I think i have to buy a new PDA.
Hi,
I have the same problem with WM6.0/6.1 if my accu is empty.
The solution I´ve found is to use the original powersource adapter while booting.
By the way:
Everytime I am using another adapter with usb-adaptercable, e.g. 1000 mA too, the accu loses rapidly his power. Ist there any htc-specification for the original-hima-poweradapter like apple uses it for the ipod nano?
Hi my phone is from Germany,the phone is of 1 year and in last moons sometime just off, auto power off without any message... and in last week can't power on. The phone just was DEAD. But now after many time try the phone is ON and again sometime just off after 2 3 or 10min. The phoblem is not from some problem I do many hard resets but still problem. Now I re-flash IPL with last version 2.*****.1 and can't unlock for re-flashing with other version. Can you tell me some good english rom for xda_nova and from where is this problem?
Thanck you!
it`s a very big problem of this model it`s hardware and you need to disasamble and put something on the processor to make pressure to him
***** said:
Hi my phone is from Germany,the phone is of 1 year and in last moons sometime just off, auto power off without any message... and in last week can't power on. The phone just was DEAD. But now after many time try the phone is ON and again sometime just off after 2 3 or 10min. The phoblem is not from some problem I do many hard resets but still problem. Now I re-flash IPL with last version 2.*****.1 and can't unlock for re-flashing with other version. Can you tell me some good english rom for xda_nova and from where is this problem?
Thanck you!
Click to expand...
Click to collapse
I've got the same problem after flashing the ROM. The Phone goes OF every time it goes in energy saving modus. So I turnes of the funktion (Backlight of after xxx sconds) don't know exacliy how it is called in english. Now the phone stays on, but of course now the battery power went down verry fast!
If I touch the Power Button which do the same (Energy saving modus) the phone goes OF as well. Sometimes it restarts emediatly some times not.
this is not the sollution for the problem, but I think it would be nice to know if we have the same problem.
i've had the same problem. First it looks like slide2unlock caused this problem. I never used this program, and my elf worked fine. After using slide2unlock the elf suddenly started to auto switch off..
Upgraded my rom to the latest TESS (lite) and changed pagepool back to 4 mb => no more auto off problems
MY Problem is fixed too
Hi,
In the meantime I've fixed this problem as well.
I had an ELF ROM running on an ELFin device. Thought that the model name would be the Model_ID. ... Well ... now I know better.
One ELFin is brocken now (don't do anything, not even powering up or so), but the second one is now working fine.
regards
Cico
Hi im from Germany,
i tried to flash my Acer S200 but it stopped by 50% and i have pluged the cable out. I cant turn it on, it gives no signal, i cant bring it to the download mode. Nothing is working no hardreset with buttons.Nothing is working and when i plug it to usb the LED isnt blinking
Sorry for my bad english ..
my phone is new, it has garanty, should i contact the acer support or can anyone help me ?
Hold volume up/vol down button + reset until you see "clean boot"
i tried it the phone gives no signal .. no clean boot is coming .. the rom flashing was at 50% i think it is breaked
but thank you
did you try removing then replacing the battery. then try bootloader mode again?
yes i tried but nothing is working i cant enter the bootloader nothing is working it is just off no vibration nothin is working
sorry, but I have to ask, are pressing then holding vol down +power +camera buttons
at the same time until blinking red light starts?
you have to get into bootloader mode then flash a custom rom
brainmaster has a few including a "clean" rom.
I had this happen awhile ago and tried so many things for 2 days that now I don't
remember what actually worked! But I don't think that your S200 is bricked.
Also, make sure that you keep the power cable pluuged in (not usb)
you need a good charge even if you don't see the green light.
just keep trying and if I can remember I let you know.
or someone here will help you to find a solution!
thank you for your help but there is no light blinking. Also when i plug it to charge no light is going on. it doesnt charge the battery. i hope you can remember
i already know how to flash a rom but the phone doesnt give any sign
sorry I can't remember but you should ask brainmaster and maybe he can really help.
And he speaks german= )
thank you i will send him my problem
Any solution
Hi. I kind of found myself in the same situation. My acer s200 is unresponsive, no blinking lights no matter key/reset combinations. Had been in the middle of flashing on a new ROM when it got accidentally disconnected.
Any possible solution? Already checked the battery out in a different phone and it's fine and charged.
Hey,
i don't want to looks like a vultur, but if some of you can't find a solution to resolve the problem you have, I'm interested by the device because I need some piece. Of course I hope you can resolve your problem but if there are no led blinking, the last possibility is to send it to acer, and if you don't want to wait/pay/or whatever to with the acer support, I'm interested by your device.
Arto
Vulture indeed!! I'm need of help man.
you still need help?????
Hey GarcoG. Yes, still in need of help. My S200 is currently a desktop paperweight at home. It's a beautiful paperweight but it was made for so much more. Would really like to get it up and running again.
A new thing I noticed. I'm able to charge my phone's battery to full on my friend's s200. Of course when I put it back into my phone, it's still completely unresposive. However, I noticed that whenever I put it back into my friend's phone, the charge on it has reduced. I'm pretty sure it's not a battery issue I have since my phone is still unresponsive with my friend's battery in it and the same happens with that battery as well.
Would really appreciate any ideas on fixing this.
Hi, count me in. I just jumped on your wagon.. will try to disassemble this beauty soon before I officially demote it to a shiny paperweight.. well it's not that shiny, i put on a matte screen protector on it
Really funny about that matte screen protector. Cannot wait for the results. In my case, phone got accidentally connected just as it had reached the stage of flashing on the new ROM. Was thinking it was probably unresponsive because the ROM instructions that enable it respond to key combinations are absent hence cant get it into Bootloader mode.
@ incognito_tkd: Any luck with the disassembly? Would like to know your findings.
I have same problem... same situation
But... when I connect my USB charger, it shows red LED on... as if the charging is ON. But no reaction
Any one help please
there is no possibility to repair the phone... you have to send it to acer !!
i got my phone 1month after i´ve send it