Hi All,
My O2 mini got problem with standby mode If i don't press power button to switch to standby mode is OK but when I press power button then screen will be turned off, later on I can't turn it on by press power button again. I tried to call my number the phone is ringing and signal light is blinking but the MOST important that I can't answer the call or turn my O2 mini back to normal mode to play. The only way is soft reset and use it without switching to standby mode.
One more thing If i turn it off for 03s only then I can turn on but more than 03s I can't
Anybody know what happened to my phone ? Your help is highly appreciated.
Best REgards,
vatana.
are you sure the backlight is not down? make sure the backlight is up enough when running on battery and on power.
settings > power
I have been, I'm sure the battery is full. I try up any ROM(1.03,1.05,1.11....) but It still not OK !!!
Somebody help me !!!!!!
Thanks Vini.
Backlight is OK not down.
Anybody has experience on it ?
Thanks to All
Pls help me to fix it.
Thanks !
Anybody help us !!!!!!!
Tinh hinh nay thi chi co nuoc anh em minh tu sua thoi anh oi !
Up !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11111 Help !!!!!!!!!!!!!!!!!!!!
i also have the same problem before. Last time I think it was viruses and I try to hard reset my Imate Jam, after that until now is already ok.
I suggest you follow the hard-reset advice. If that doesn't solve your probs. see if you can trade it in.
Bypass with a today plugin, like dktoday (easy switch to standby, BT on/off, displays current act. network...)
Success, M
Thax ! But not sussecful ! I try it many times !!!
stand by problem
hi even i am having the same problem no solutions as such
i think the LCD display is gone or else loosing sufficiant power supply
now i am using NOKIA for time being
help us please
You may call PPCTECHS
Hi,
I had a serious screen problem in the past: My 15 LBs bowling ball droped over my JAM and crashed the screen while blending the case!!
I sent my device to www.ppctechs.com for repairing and now its OK.
They have 2 types of service: partial and full system repair.
You may call PPCTECHS
Hi,
I had a serious screen problem in the past: My 15 LBs bowling ball droped over my JAM and crashed the screen while blending the case!!
I sent my device to www.ppctechs.com for repairing and now its OK.
They have 2 types of service: partial and full system repair.
Related
Hi all,
I have had this problem earlier but a hard reset solved it... Now I might have to do a hard reset again to solve it, and so lose all my data
. Everytime I put the jasjar on external power (adapter or usb) the backlight switches off.
. When I soft reset, the backlight switches back on, but after the logo screen it switches off.
. The only way to get backlight to stay switched on is to keep it away from mains (ie running off batteries only)
. As soon as I put it back to power supply, the backlight goes off, I can stll see the screen, but its very dark...
Anyone got this? This is an annoying and serious bug if it is, or maybe my actual device has a defect?
A response or turnaround trick will be most appreciated...
Thanks in advance
Greetings
Nabil H
fiddling fixing
I managed to fix it for now by fiddling with the power controls and pressing several times the switch off and backlight on buttons... I wish this gadget was more reliable for the price tag... I wonder how the asus fares in that chapter...
Hmmm. Mine doesn't do this and I haven't heard anyone else complain of this. I hate to say it, but you may have a defective unit or maybe even a bad AC power adapter.
Yep no problem here. Looks like its time to get a RMA
backlight problem
Thanks.
It happened only twice,but since it is still under warranty I better get it looked at by i-mate, I am going to contact them and ask them to have a look at it...
Nabil H out
Hello!!!
The problem is that when I'm working with device in can turn of by it self and don't turn on when i put in changer red led glows after some time it can turn on by itself ... I think the problem is in power keys that are marked by 1 in picture or power controller 2.
Sorry for my english i speak rusian...
Thanks for help...
I have a problem , when i tried to update my device it erased rom and when it started uploading os it shut down and error mesage apeared i don't knew what to do help me please!!!
I finaly downgrade to wm2003se rom but problem doesn't desapeare...This pda every time shutdown it self when i take battery and put it back it don't turn on.I need to whait and after some time it can tur on by itself
I don't knew what to do maybe someone here knew electronics
and can hel me with this problem...
Or may be i can find somewhere electronical scheme of mda or of mda's power...
i also have this problem, i also change a new battery, same problem.
it's only operate for a while (3mins - 1hour ) when i lucky,
after that restart, restart....can't load windows....
any Master can't help.
I need to find power controller but i don't knew where to get it...
My O2 xda ii also has such a problem. Also the phone couldn't last for 8 hrs in standby mode.
I'll try to replace power controler if I find it and post here results !!!
Hi all,
since 2 days ago I have this problem. The screen switch off itsel,and sometimes the power buton just doesn't work.
Also, sometimes, pops up the window saying if I want to swich it off, like when we press the power buton for a few seconds...but without doing it!!
I really don't know what to do, is very anoying. I thought might be because the other day I went for a walk, and was raining, so could get wet(?) ..don't know if that could be the problem, but anyway, that was friday, and today Sunday still happen the same.
Any ideas? Might get the buton blocked? If so...how do I unblock it?
I check the screws, and don't know what tool would be good if i need.. might be an special one ?
Thanks in advance.
Carles
Screen switches off
I have a Tytn (Hermes) the phone comes on sometimes and works , then on occasions it would be on , but the screen is off . The backlight stays on but nothing on screen. Push the power button and sometimes it will come back on , other times i have to remove the batt and wait a couple of hours before the screen comes back on . When it is like this then even if you reboot , it goes past the htc logo and just before windows loads the screen goes off .I have re installed the shipped roms again as at first i thought it was a software problem . I can see my phone on active sync and i can also load software to and from the phone , even with the phone screen off . any suggestions would be appreciated . Thanks
Natty Fish
Has anyone had a problem of their Genie continuously wanting to switch off, and I mean really off so next time the HTC logo comes.
I also cannot press the on button quickly to put the screen off with phone on standby.
I constanly get a pop-up saing: Warning: Power will be turned off, and you may lose data if you have not saved them. Do you want to continue... YES NO
If I press YES it shuts down, if NO it continues like normal and about 5 minutes later comes again.
Has anyone had anything like this before? I am running WM6.1 Professional
Regards
chris
same prob
my phone having the same problem plz anyone give solution i m using orignal wm5..
hmmm...
check it wid other gene's battery...caz my brother had da same problem...and da battery was faulty !
Anyone else have this problem? Sometimes, if the screen goes to sleep, when I wake it back up, the touchscreen is unresponsive. I have to soft reset to get it to start up again. Any ideas on how to fix it?
I had the same problem, and flashed another rom, and problem gone.
Hello guys,
I was just searching through the forum with this exact problem and found this thread.
If the phone wakes up from sleep the touchscreen is unresponsive for a few seconds. If I insist to press it it only takes longer for it to respond. This is a very big problem because I sometimes miss calls because I can't answer them. Not even the for hard buttons don't work (maybe because they are also touchscreen).
I've tried flashing different ROM's (Miri, Dutty, NRG) even flashed back to the standard one and again back to a 6.5 one (as I saw this step fixes a lot of problems for some people) but the result is the same. I'm running out of ideas.
I don't think it's a hardware issue because if i leave the phone until the backlight dims and touch it, it goes back on, so it registers the press but doesn't act on it.
It's a very serious and I'm hoping someone here has a solution.
Nobody else is having this issue? Is there no hint on what is going wrong with our phones?
It appears it's happening more and more often and the screen is dead for more and more time.
Hi
I have had the same problem but solved tonight
There are many threads about this but no real solution I tried them all.
My first HD lasted till last week when I had to replace it because of a "Newton Ring" problem. In 10 months of ownership I got a screen freeze maybe 5 times.
My new replacement arrived last Saturday - same original Orange Rom and radio.
I have loaded exactly the same programs from the old phone and have found that when I put it in sleep mode via the power button its a 50/50 chance of it waking up. Receiving a text message does not wake it up either.
I can hear the volume control working and the haptic buttons provide feedback - but black screen. If I hold the power button down I get the bleep to ask if I want to power the device off - then all goes dead. If I wait 5 minutes the haptic buttons/volume buttons work again and the screen comes alive revealing the yes/no option to power off.
Also strange whilst in this locked state the orange charging light comes on - when it goes off I know i can wake the screen up !
I tried :
Enabling and disabling the Today Screen timeout
Auto adjust backlight off and on
Different screen brightness
Manual/default operator selection
Checked HD Tweaks settings were correct in registry and things I can't remember.
What has worked :
Start - Settings - System - Power - Advanced and unchecked the box "turn off device if not used for 5 minutes"
The daft thing is this was enabled on my old phone and would always wake up with a text/call or power button push !
What has changed ?
r
Andrew
Update - Found the problem
Whilst the above fixed my freeze problem it has been bugging me why - as the advanced power features are useful and I don't always remember to hit the power button to sleep the device.
I have now realized what was not set up the same as my old phone.
No start up password !
To enable this I found this thread http://forum.xda-developers.com/showthread.php?p=5004821 and changed my registry setting to 0.
This immediately takes you to the lock screen where you can now enter your password details and make them stick.
I now have a start up password and can set the timeout to 24hrs.
All the power settings now work correctly - and no screen freeze
r
Andrew
Spoke too soon
3 hours ago went to use my phone - black screen
Connected via activesync and MyMobileR.
Rebooted and got the "Microp Version Mismatch 0" message.
Checked out threads about this error on the mainly Diamond forum and can confirm my screen is well and truly dead.
Contacted Orange and they are sending another replacement tomorrow.
What p*sses me off is the number of hours I have spent to get one normal days use.
r
Andrew
Sorry to keep posting to this thread - but I am hoping that my experiences may help somebody
As said I am getting a replacement tomorrow and in one of the threads a guy said put it in the fridge for 20 minutes !
Well I thought what the h*ll and did.
Wrapped it in some tissues to absorb the condensation when I took it out - replaced the battery and it works - no Microp message and has behaved ok for 6 hours.
Got to be a hardware issue ?
Your thoughts.............
r
Andrew
Hi Bigfish,
please let me know the phone is still ok after more hours out of the fridge. i have similar problem on my HTC touch- ELF and i have been searching for solution, and i found this
http://www.fixya.com/support/t982721...not_responding .
i do not have tools to open it myself and would like to try it.
if you r familiar with it please let me know.
cheers
M.
Hi
Sorry your link is not working.
As to the phone it was still ok 26 hours later when I had to exchange it for my replacement.
Weird !
r
Andrew
Hi Andrew,
the fridge trick did not work for me. i kept searching for solutions and i found out that the problem is the digitizer (the touch screen). it might have received a shock (dropped on the ground) or other unusual pressure (in the pocket), and the digitizer gets out of initial position. the digitizer takes that contact as a tap -a continious tap- and does not respond to other taps. you might have to open the device and reposition the digitizer or replace it is there is some damage.
cheers
mumur
Sorry to hear that.
My replacement phone - so far has behaved perfectly.
r
Andrew
it strikes me that if I shake the phone that the phone jamming. I get no response. Even when I tap my finger hard against the rear top I get a crash. The only solution is to take out the battery and reboot. I think it has to do with a hardware problem.
there are others who also suffer from it?