HI ! In the firsth place sorry for my bad english.
I have had a titan for about 6-7 months and a week ago it stopped working without a reason.
It stopped responding and after a reset it only shows the starting logo, and after that the screen slowly shifts to pure white colour and I can hear a one "beep" sound.
I tried to hard reset it and everything but without any luck. It charges the battery fine when connected to a USB port (orange light),
after turning it on i get the green ligh, main branded logo and some numbers (M05 S04 B06 D 3.60 and 2 lines of other numbers but they show only for like half a second and disappear so i cant write them down)
after that nothing, the logo screen goes all white, with some "notification" sound and thats all.
When connected to PC It gets detected as "something" and I cant use any flashing software because it says that it did not detect the device,
one time It got detected as some modem device. Is there any way to bring it back to life ? or is it bricked permanently ?
Please Help
And Thank You in Advance !!
Update: I managed to make a connection between my PDA and PC
it is detected as "Microsoft windows mobile adapter #2", and my PDA_PC is detected in My Computer,
but when I try to flash it the software detects it i get the message to wait 5 min till the flash is over but
as soon as this message appears my PDA is getting disconnected and i get an connection error...
help ;(
Ah... and one more thing, I dont know if it matters but when i open my PDAs memory the windows folder appears to be deleted...
can any one zip their windows folder and give me a link to it... maybe that will help ;(
I have the same problem on my Mogul with connecting to my Computer! For some odd reason it won't sync and restarts my computer automatically!! WEIRD!? Just go check out some of the Unbricking posts or Google it- they may help you!
Related
Hey guys,
ActiveSync wasn't finding my phone last night, so I soft reset it. When it started up, it's stuck on white screen (where the blue, windows mobile screen should be). ActiveSync cannot see the phone at all.
I've read the post: http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
I've put it into bootloader menu (SPL 1.09) and connecting the USB cable changes "serial" to "USB"
Windows XP finds "HTC USB Sync" device and ActiveSync's wheels start turning.
A few seconds later, ActiveSync stops wokring, saying the device can't connect.
All I want is to recover my SMSs, the rest I don't care.
Is there a way to connect to the phone's files in 'HTC USB Sync' (bootloader) mode??
*crosses fingers*please say yes, please say yes*
All the best,
Dax.
i have the same problem!
I managed to upgrade to 1.09 while stuck in this white screen... is there any fix to the white screen?
The other forum post didnt work, tried the battery off for 20mins, the usb plugged in with no battery (phone doesnt even turn on this way)
none work
please help you brainy guys
Have you tried to flash from SD card... There is a guide i WIKI.
yeah, I had to hard reset and lose my data
i also have the white screen. it just died one day, at the time i didnt even know about roms and i'd never heard of this site.
any help getting it mended would be well appreciated.
Hi Toppy,
Try pulling battery out, other than that, only thing to do is a hard reset.
Sorry
Details for a hard-reset should be easy to find on this board.
Great reason to backup frequently.
(I use PIMBackup 2.5 everynight at 4am and sbp backup twice a week at 4:30am)
a blank screen
heyy guys i have the same problem with my screen, i bought a new one in ebay, after installed the new screen, i turned on the phone, the screen works fine, but when i turned off the phone and change the sim card, then when i turned on the phone again the screen was in blank!!!
guys if you can help my please i will aprecite it!!! i cant live without a touch screen
Creation magic,
Did you follow my suggestions?
My phone gives me white screen every now and then when I reset it. I simply reset again and it's fine.
Seems to occur more frequently the longer I leave the phone without total formatting. (It's Windows - it needs ocassional formatting)
about my white screen
when i turn off the phone and turn on again my screen appears in blank but when i did a hard reset my screen works fine!! i don't really understand my htc 8525 hahaha he is crazy and the call button and end call button doesn't work.
thanks
thanks guys for help me and everyone here in this forum!!!
you're a real brainy guys
Hi guys,
This is my problem:
I have an Orange SPV 700. I have unlocked it few month ago and installed the Indigo Full ROM. Today in the morning i downloaded some stuff in my phone, and it started to work very slow (probably the memory was full). I have reset it and it didn't boot up.
When i start the phone i see the "by bepe" screen, then "smart mobility" screen and then the "windows mobile 6 professional" apears and nothing happend anymore.
I tried to install another rom but the Active Sync doesn't connect. When I conect the phone, the active sync tries to conect, but it doesn't succeed, but the network connection apears in control panel and i can even ping the device.
Can anybody help me reset/format/anything my device?
10x
Mihai
won't boot
mihaimoro said:
Hi guys,
This is my problem:
I have an Orange SPV 700. I have unlocked it few month ago and installed the Indigo Full ROM. Today in the morning i downloaded some stuff in my phone, and it started to work very slow (probably the memory was full). I have reset it and it didn't boot up.
When i start the phone i see the "by bepe" screen, then "smart mobility" screen and then the "windows mobile 6 professional" apears and nothing happend anymore.
I tried to install another rom but the Active Sync doesn't connect. When I conect the phone, the active sync tries to conect, but it doesn't succeed, but the network connection apears in control panel and i can even ping the device.
Can anybody help me reset/format/anything my device?
10x
Mihai
Click to expand...
Click to collapse
Do a hard reset
how? if you mean to press the little button from the bottom, i've allready done that. Actually that's the only button that works. If I want to shut down the phone, i have to remove the battery.
10x
Mihai
no solution yet
I see that nobody gave me an answer...
May be you can help me this way:
Anyone know a way to access phone's memory without using activesync?
10x very much
Mihai
You should REALLY start reading before asking...
Go to this address:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Resets
Have fun resetting that thing...
10x
10x
I didn't know what to search for
Mihai
Hi Guys, hopefully someone can help me here it is driving me crazy - well, here is my issue.
Doesnt matter what PC I plug my HD into it doesnt get picked up, i looked in device manager and still nothing. Its like its not connected, but it shows on the phone that it is charging. And does charge.
Can someone please help?
Thanks!
Settings - Connection - USB to PC - uncheck 'enable advanced network functionality'
All that was there is ' Enable faster data synchronization '
No advanced network functionality. Im on Telstra NextG Network Australia with there crappy stock rom if that helps.
I'm looking at a stock Touch HD and you're right- they changed the name of the box. So uncheck 'enable faster data synchronization'.
I did but it is still not working.
I have also done a hard reset and restore to manufacturers default and still not working.
What kind of PC are you using? Is it XP? If so you need to download ActiveSync.
Using XP.. I have downloaded and installed Activesync. It used to be picked up on every pc and suddenly now it doesnt.
Opened Activesync ports in your firewall settings?
Yeah its all fine, its as though the PC doesnt even recognise it. Doesnt show up in Disk Management.
hi lucky
you're already the 3rd one with this problem.
if you plug-in the usb connector, is there a dialog popping up on your hd which let's you choose between synch or hd mode?
if not, welcome to the group of disapointed htc owners.
there is already a thread somewhere about this problem. i have exactly the same, but no one could help me until now.
at least i found a way to flash a rom. the usb connection was working for about 20 minutes. afterwards it broke down again...
try the following:
1. shut down hd
2. remove SD and Sim Card
3. plug in the usb cable
4. do a hard reset by holding vol up and vol down while you press the power button
5. confirm the hardware reset
6. when the hd is booting up again, it will do some kind of customization process. during this process active sync should come up on your pc. cancel the device setup in acive sync and wait until your hd is completely configured.
7. afterwards reconnect the usb cable and active sync should work for a while...
let me know if it helped. i'm still searching for a permanent solution for this problem...
Nope, didnt work at all.
Not even the choice to decide what I want to do pops up on the phone.
Do you think it could be a hardware fault?
I think it is a hardware fault because i did a SPL boot and instead of 'USB' showing in the white box "Serial" did.
It just seems wierd because it was working fine for 2 weeks and then it all the sudden stopped and I did no ROM flashing or anything.
Should I try reflashing my device through the SD card and see how I go from there?
did you try a different cable???
I have about 20 different USB -> mini USB and only about 2/3 of them work with phones !!!
Yeah ive tried all different cables, ive tried ones that work with my diamond but still dosent work with my hd.
luckyluke1137 said:
Hi Guys, hopefully someone can help me here it is driving me crazy - well, here is my issue.
Doesnt matter what PC I plug my HD into it doesnt get picked up, i looked in device manager and still nothing. Its like its not connected, but it shows on the phone that it is charging. And does charge.
Can someone please help?
Thanks!
Click to expand...
Click to collapse
Are you getting anything popping up in device manager when you plug it in, in other words does the list refresh like it has detected a new hardware device or is it completely silent? I have seen it a couple of times where a device gets stuck as being recognized as something else. If the list does scroll (responds to the HD being plugged in) do a screen shot of everything in DM then plug the HD in and compare the lists to see if it is showing up as something else. If so, delete the device then unplug and plug in the HD again and have it reinstall the driver.
Good luck,
Gordo
I did what you said Gordo, and it doesnt show up inDevice Manager. Its as though its not even plugged in but for some reason it still recharges off the USB.
I guess about the only other thing I can think of is to plug it in on another PC and see if that computer tries to load a driver. If it does then it is something strange with your computer. If it doesn't then there is something bad with the USB port on the HD (maybe).
Gordo
Yeah I tried that but still nothing, im sending it back to Telstra, since its within 14 days of me getting it I get a whole brand new one!
thanks for your help guys
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...
Hi Guys,
Before this happened, my phone just kept on crashing randomly but today, after it crashed, it wont turn on anymore. I only got a black screen. I did search via google some way that might fix but none of them worked. I tried but hard reset or entering via recovery mode does not work. It will just vibrate and nothing happened. The samsung logo won't even appear. I also connecting my charger while doing hard reset but it does not work either.
So I tried other ways that involves a PC to help fix my phone and I found odin. I tried using Odin but it seems that it also does not work. Somehow, the odin and my pc detects my phone but it still does not work. Logs in odin is showing that my phone is "Added". On my pc, although my pc detects my phone (a sound pops up that it detects it) but it does not show up on my file explorer. When I look it up at device manager, it is listed under Portable USB Device > MTP USB Device.
Also, I tried opening up my phone but the LCD seems fine, I opened it up since I though that the connection for LCD is loose. But this does not work either. Now, I am out of Ideas on what to. Last resort is to take it a service center but I try to avoid doing such because I want to learn how to fix this.
Need help or advise on what to do.
Hmm there's a strong possibility that your LCD may be just completely dead. It vibrates and it's detected but it isn't showing anything. Can't really think of more than that.
ShaDisNX255 said:
Hmm there's a strong possibility that your LCD may be just completely dead. It vibrates and it's detected but it isn't showing anything. Can't really think of more than that.
Click to expand...
Click to collapse
Thank you for the reply! I will try to test new LCD, and update here