Database Users

Can't Flash Anymore!?

I try Flashing, I have been doing it..
but now it gets stuck on
Loading... or on 0% black htc screen on phone,
when I restart with Vol Down, or even trying to flash through USB...
if i have a LEOIMG.nbh on my SD Card it just HANGS/STICKS on "Loading"
and if I press vol down and restart with no SD Card in, and try flashing through pc, it sticks on 0% on the htc black screen on the phone.
I flashed onto Duttys_Leo_Sense_2.5_5.2.23549.5.5.0_1.72_Multi-Lang_6.5.5
I'm on
ROM Version: Duttys M-Lang Series 6.5.5 V1 WWE
Radio: 2.08.50.08_2
On Bootloader it shows:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
The phone works-it's just stuck on Duttys_Leo_Sense_2.5_5.2.23549.5.5.0_1.72_Multi-Lang_6.5.5
and I can't flash to another ROM/s
I've even tried flashing by hsb and sd card to original rom
HTML:
http://www.htc.com/uk/SupportDownload.aspx?p_id=297&cat=2&dl_id=902
I get
ERROR [262]: UPDATE ERROR
When i run HSPL2, it doesn't let me do anything still, it detects phone-but then just give error,
CRITICAL ERROR
Flow:00000001
Error code: 00000002
Description: USB Connect failed!
But Windows Mobile Device Center Connection works and all.
Need other info?

What spl do you have and which rom are you trying to flash?

I have SPL 2.08.0000, I try Flashing with
HTML:
http://forum.xda-developers.com/showthread.php?t=629974
Actually can't flash any ROM.
I keep getting Error[260] : CONNECTION

Read my Private Message.
Mark.

Please help...

Bonobow said:
Please help...
Click to expand...
Click to collapse
Sent PM

You MUST do everything you read in this post first!
Only after this step, next styps can been done!

Timmy_01 said:
You MUST do everything you read in this post first!
Only after this step, next styeps can been done!
Click to expand...
Click to collapse
I done this already-
SPL-2.08.0000 8G XE

just a thought, did you instal the mtty drivers in the past? because if those drivers are running on the usb port then I think you won't connect from hspl.
boot to bootloader, connect usb, on pc open device center, find mobile device, right click and update drivers. click through and it will instal the latest drivers, then try hspl2 again.

Quote:
Originally Posted by ClydeB1 View Post
After the PM's this is now sorted - correct?
YES!!!
but the way i had to make it work was, make it go into bootloader with no sd card in. so then when i put usb cable in it says usb, then i put it in a usb slot i hadn't used, and ran HSPL2 as admin, and it worked!!! Thank you!!!
__________________

ahh good news.

samsamuel said:
ahh good news.
Click to expand...
Click to collapse
I was CRYING -Serious!!!

TNX man!
That did it for me...
but the way i had to make it work was, make it go into bootloader with no sd card in. so then when i put usb cable in it says usb, then i put it in a usb slot i hadn't used, and ran HSPL2 as admin, and it worked!!! Thank you!!!

plz help me :(

hello, maybe some1 from here can help me... i think my phone is bricked!
when i boot my phone, it only gives HTC logo and nothing else..
i did a soft and hard reset and now able to get into that bootloader thingy with volume down and on button.. but now i am stuck,
i tought just installing original software would help, but it doesnt install it!

In bootloader do you have hspl installed. To load magldr in order to run a NAND Android rom, you need 2.08.hspl and a 50 series radio, 2.08.50 or higher.
Why can't you flash a rom in bootloader, what errors do you get? Just connect phone in bootloader to your pc and when "usb" shows on screen flash the rom.

What did you do???
mardi123 said:
i tought just installing original software would help, but it doesnt install it!
Click to expand...
Click to collapse
Can you provide more details:
what phone do you have (HD2 Europe, TMOUS, etc)?
What is currently running on it (or supposed to be, look at how I list my current phone in my signature for how to tell us what you are running)?
What got you in this predicament (flashing rom, radio, adding apps, themes, etc)?
What "original software" are you trying use that's not helping?
How are you trying to install that "original software"?

i tried original version:
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
and
dezeRUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
if i try to instal, it just doesnt do anything, stuck in 0%
my serial nr: ht033nw01277
further information:
pb81100 HX-BC
SPL-2.08.0000 8G XE
MicroP (LED) 0x05
MicroP(TOUCH) 0x40

mardi123 said:
i tried original version:
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
and
dezeRUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
if i try to instal, it just doesnt do anything, stuck in 0%
my serial nr: ht033nw01277
further information:
pb81100 HX-BC
SPL-2.08.0000 8G XE
MicroP (LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
You have 2.08.0000 - you HAVE to have 2.08.hspl to install magldr.
Are you sure those roms are the original roms for your device? You need to download the orignal rom from HTC for your area using your S/N

i tried to install android, so i downgraded to RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
next installed
HSPL2_RUN
next to this it didnt do anything,
now i reinstalled HSPL2_run and that worked it said hacked

mardi123 said:
i tried to install android, so i downgraded to RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
next installed
HSPL2_RUN
next to this it didnt do anything,
now i reinstalled HSPL2_run and that worked it said hacked
Click to expand...
Click to collapse
Yes, but when you run hspl2 you can select either 2.08.0000 or 2.08.hspl in the drop down. You have to select 2.08.hspl NOT 2.08.0000. Also your radio is now 2.06.51.07, you have to flash to a 50 series radio (not 51 as you have) and it has to be 2.08.50 or higher as I have already said.

oke now i have hspl version, and succesfully installed MGLDR111, trying to instal android, it sais this:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Error Description: wait marker fails
Info: .\RSPL\BootLoader.cpp (225)

mardi123 said:
i tried to install android, so i downgraded to RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
next installed
HSPL2_RUN
next to this it didnt do anything,
now i reinstalled HSPL2_run and that worked it said hacked
Click to expand...
Click to collapse
that was the first thing you needed to get done, hardspl is very important, now that you got the hacked it message HSPL is in, go into bootloader and check that it says HSPL, upgrade your radio to a 2.15.50.14, do a task 29, install MGLDR and then flash whatever nand rom you want.

From Noob Guide to installing NAND roms FAQ:
Not able to make a usb connection to the phone when in Magldr
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Go to the Activesync icon in the bottom right corner, right click on it and untick the option "Allow usb connections" and then connect the device again. Run daf.exe (or install.exe) as administrator by right clicking on it and selecting the option (if using Windows7 or Vista). Hopefully the usb drivers will then install and the Android Rom will flash.
Another option could be to uninstall and reinstall Activesync or to try different usb ports on your pc. If that doesnt work and you have Windows XP then you need to try on a machine with Vista or Windows 7.
If none of this works then try taking out your micro SD Card and repeating the process or flash a Custom Rom before you flash Magldr rather than a Stock Rom.
Lastly you could try starting the NAND installer with the phone unplugged and then plugged the phone in. The installer should immediately detect your device and proceed to flash.
Click to expand...
Click to collapse

oke thanks all! that radio version, i've downloaded it, and it is succesfully installed
now it booted up in aMAGLDR v1.11 and see som listing, boot ad sd boot ad nand etc, so now i am gonna do that task29 thingy and try installing 1.13!

Glad to hear. Good luck on the upgrade.

O_M_G
THNX U ALL!!! It's fixed and it is now in android!
I can't explain how thankfull i am, with you guys!!!
THNX!!!!!!

[Q] Error After installing maglder

hi All
after installing ROMupdateutility.exe to my HD2 ,while restarting to get the black screen that have 9 choice but i didnt get this black screen and its stopped in HTC logo white screen,
whats wrong with this and what i have to do?
thanks alot.

I f you install no rom that's a bit normal
When you start your phone, push the power button and hold it until you get the menu.

i didnt get it yet, its 5 minutes
thanks,

What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.

Beany69 said:
What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.
Click to expand...
Click to collapse
its 2.o8
Sent from my HTC Desire using XDA App

Problem with maglder
Hi
I am trying to install Magldr on my HTC HD2, SPL 2.08, however i am getting the following error message everytime MagLdr (RomUpdateUtility) restarts my phone to upload the new version,
"ERROR [266]: UPDATE ERROR
The update utility cannot get response from your PDA phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone."
Dont know why it shows this message, I checked all the connections, the SPL shows connected to USB, my Windows 7, 64bit also dectects it, but I am still getting this message. please help

Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.

Beany69 said:
Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.
Click to expand...
Click to collapse
thanks Beany69, Not sure, I am new to this thing, right, let me tell you extactly what it shows when I start my phone in boot mode or what ever its called i.e. when I press the downkey with green button
"PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40"
is this HSPL, if not how do I upgrade this it the required HSPL., please
and when I run the RomUpdateUtility.exe on my pc, it checks the current version displays it as "Miri"

[Q] Can not Wipe NAND with Task29

Hi
Here are my Spezifcation:
HTC HD2 512MB flash
ROM:1.66.407.1 German
Hard SPL: 2.08 HSPL
Radio Rom: 2.15.50.14
My Problem is, i can not wipe my NAND with Task29.
I read the instructions and done all steps till the Phone Restarts, but after the the restart my phone freeez at the HSPL Screen and don`t move.
I See This on my Phone:
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
At the PC a have the folling Mesage:
Error [266]: Update Error
the Update Utility canot get response from your PDA Phone. Pleas check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone.
I have tryid this Step a few times, but its allways the same.
I try it with MAGLDR113 and with Easy Android.
Have anyone of you any Idee where the Problem is?

SanDiskFormat said:
Hi
Here are my Spezifcation:
HTC HD2 512MB flash
ROM:1.66.407.1 German
Hard SPL: 2.08 HSPL
Radio Rom: 2.15.50.14
My Problem is, i can not wipe my NAND with Task29.
I read the instructions and done all steps till the Phone Restarts, but after the the restart my phone freeez at the HSPL Screen and don`t move.
I See This on my Phone:
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
At the PC a have the folling Mesage:
Error [266]: Update Error
the Update Utility canot get response from your PDA Phone. Pleas check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone.
I have tryid this Step a few times, but its allways the same.
I try it with MAGLDR113 and with Easy Android.
Have anyone of you any Idee where the Problem is?
Click to expand...
Click to collapse
You have to enter Boot-loader mode. To do turn off the phone then press Vol down + Power button. Keep holding until you see the Tri-color screen, it's the boot-loader mode.
Connect your USB cable and you should see on the bottom the serial changed to USB.
Then open the task29 and follow instructions.
Turn on activesync usb connection under settnigs (depending on what you have now). and turn off the anti-virus.
If I solve the problem, please don't forget to thank.

The problem was with my PC... I dont know why but, i used the Laptop of my Girlfried make the MAGLDR113 run and all done.

HD2 Stuck on wsod and bootloader

Hi, i see this:
PB81100 HX-BC
SPL-2.0.8.0000 8G XE
MicroP(LED) 0x05
And i can go further, if i insert a stock rom in SD rename to leoimg.nbh it is stuck on "loading..."
any help?
I try to flash hspl but nothing happens for hours....

what version of hspl did you flash?
an what type hd2 do you have(tmous or eu)????

i've tried 2.08 and above... but always stuck on animation of bar going left and right, i left it for 2 hours, but nothing happens!
plz help!! Is my hd2 bricked?

Don't think so, from what I know you have to flash the wrong radio ver on tmous handsets to brick them...
Have a read here..
http://forum.xda-developers.com/showthread.php?t=1090783
Have to go out now back later..

i've downloaded the unified tool, but nothing works!

Better use the hd2 nand tookit (link in above link)
what happens when you power on an hold the vol down button...do you get a three-color screen?

yes with those infos:
PB81100 HX-BC
SPL-2.0.8.0000 8G XE
MicroP(LED) 0x05
so?

Try the hd2 nand toolkit and select install hspl and follow instructions.
When you plug usb into phone it should say usb on the tri-color screen.

I've tried. The bar of loading goes around but The hspl won't install. I will try again now

The same again. Nothing change.

so it recognised the phone tried to install, and did it give an error..??
What version did you select ?

i tried 2.08 hspl and others, but stuck on bars loading back and forward and even after two hours nothing happens... i'm desperate...

Only other thing I can think of is check that your anti-virus is not blocking it , actually turn it off and try again....

i've disabled real time protection and tried...nothing.
i dunno what to do more...

mrmcphisto77 said:
i've disabled real time protection and tried...nothing.
i dunno what to do more...
Click to expand...
Click to collapse
Disable completely ...to make sure..

i've a mac at home and i'm trying now with a vmware machine... with no AV, tomorrow i'll try on a laptop with wxp installed...
But now, no success with the wxp vmware, without AV. Same behaviour of a "direct" wxp installation.

should active sync accept incoming usb connections?

To install any SPL or HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
Otherwise the installation will fail!
First go to here to download HSPL 4. I suggest HSPL 4 because it supports all SPL versions that are out right now including SPL 3.03.0000 and SPL 3.10.0000. Remember you can also use HSPL 4 to flash back to your original SPL. Once you have HSPL 4 downloaded use a zip program like WinZip, WinRar, or Win7 to extract the .exe file for the DFT installation utility to a location of your choosing on you computer. Take and put your HD2 manually into bootloader by holding the volume down button down while powering on your HD2. When you see the multicolor bootloader screen on your HD2 connect it to your computer via USB cable. If it is the first time you have connected it to your computer while in bootloader you will have to give it a minute or two for the drivers to install. When you see the Serial in the white bar of bootloader change to USB you have a HTC USB Sync connection between your HD2 and your computer. This is very important, make sure you have the latest ActiveSync or Windows Mobile Device Center version (depending on what version of Windows your computer uses) installed on your computer as it has the updated USB drivers for the HTC USB Sync connection. Go to here to download these. When you see the USB in the white bar of bootloader right click on the HSPL 4 utility and select run as administrator. Follow the on screen instructions and select the desired HSPL version when it prompts you for what version you want to install. If you want to flash MAGLDR to install NAND Android or Windows Phone 7 you have to select 2.08 HSPL. When you see “We hacked it” on your HD2 screen you click yes on your computer in the box on the screen to confirm you see “We hacked it” then click close and you have flashed HSPL to your HTC HD2. T-Macgnolia
This is from the link I gave you earlier.
Read it carefully and follow the instructions to the letter. go to the original post for the links.
That's as far as I can go to help you..
Best of luck

i've got a 2.08.0000spl now... but i can't manage to flash a hspl...is the bootloader damaged or corrupted?

done the removal... when plugged again it automatically reinstalls drivers from activesync folder, is this correct? should i uninstall activesync too??